Get your 2010 MAZDASPEED3 Short Shifter @ TWMperformance.com!
Get your 2010 MAZDASPEED3 Short Shifter @ TWMperformance.com!
+ Reply to Thread
Results 1 to 12 of 12

Thread: PLZ HELP!!! How to remove Double sided tape

  1. #1
    Registered User BLU_MP5's Avatar
    Join Date
    Sep 2003
    Location
    Califonia
    Posts
    130

    PLZ HELP!!! How to remove Double sided tape

    Could someone plz help me, I applied double sided tape to the front of my MP5 to install a DGMotorsports Uerethane lip and now I need to take it off to have it painted, but the tape in ON the front of my car and WILL NOT come OFF with ease, Oh, it came off the lip really easy but on the car, what a Bitch! Any suggestion on removal that WILL NOT effect my paint? PLZ HELP

  2. #2
    The Rich Man's P5 RobMP5's Avatar
    Join Date
    Mar 2004
    Location
    Jacksonville, FL
    Posts
    173

    From what I have seen around the forum 3M adhesive removal works pretty well. That what most of us have used to remove our side moldings. The only advice I could give is to give the 3M stuff time to loosen the glue before you try to remove it again.
    100% Stock 07 Silver MX-5 MT



    Ex-2003.5 Pure White Mazda Protegé5 MT
    Grade A 90% STOCK -

    Fog light mod | B&M Short Shifter | DaveB Rings
    Shaved side moldings | Red Painted Calipers
    Protege5online.com MP5 badges | 30/15 Tint
    Bat's Vinyl Eyelids and Smoked Tail Light Overlays

  3. #3
    Registered User memo79's Avatar
    Join Date
    May 2004
    Location
    El Paso, Texas
    Posts
    856
    Donated: $10

    or squirt some 'goo-gone' or 'goof-off' on it and let it soak for a while.

  4. #4
    Registered User BLU_MP5's Avatar
    Join Date
    Sep 2003
    Location
    Califonia
    Posts
    130

    Thnx all for your help, I got it all off but can you believe it took 3 hours and there wasn''t really that much, mayb about 2 feet worth total. What a B$T*H.

  5. #5
    No Heat bonesmp5's Avatar
    Join Date
    Feb 2004
    Location
    Portland, Or
    Posts
    1,578

    ya -- mine was a biatch as well --

  6. #6
    The Rich Man's P5 RobMP5's Avatar
    Join Date
    Mar 2004
    Location
    Jacksonville, FL
    Posts
    173

    yeah that about how long it took me. my fingertips never forgave me trying to peel the last bits of glue off, but I think it was well worth it... shows that we have dedication towards our cars
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  7. #7
    Registered User MX5RACER's Avatar
    Join Date
    Sep 2006
    Location
    Lauderdale Lakes, FL
    Posts
    188

    Sorry to bring an old thread back from the grave, but the best way I have found to remove adheasive is to use lighter fluid on a rag. You rub the lighter fluid onto the surface and the glue just wipes off. Seems to work really well, and so far, no damage to any painted surface I have tried it on.
    Last edited by MX5RACER; 05-13-2008 at 09:02 AM.
    Doug Quara Jr "DJ"
    Drag racing is for fast cars...
    Autocrossing is for fast drivers!
    Zoom-Zoom


  8. #8
    Registered User BLU_MP5's Avatar
    Join Date
    Sep 2003
    Location
    Califonia
    Posts
    130

    Thxs

    Thnxs MX5Racer. I have since removed all the tape, but my buddy that was suppose to paint them for me took off with my ground effects, I'm pissed off so much. I really liked the way they looked and I don't have an extra $1000 for a new set.
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  9. #9

    Angry Boss and I

     When I take a long time, I am slow.   When my boss takes a long time, he is thorough.   When I don't do it, I am lazy.   When my boss doesn't do it, he is too busy.   When I do something without being told, I am trying to be smart.   When my boss does the same, that is initiative.   When I please my boss, I am ass-kissing. ..World Of Warcraft gold is WoW gold  When my boss pleases his boss, he is co-operating.   I do good, my boss never remembers.   When I do wrong, he never forgets.

  10. #10
    8ANNED x1 & H8'd 808MP5's Avatar
    Join Date
    Jul 2007
    Location
    Zip Code 96744
    Posts
    3,614
    Donated: $8.08

    Lol

  11. #11
    The Devil is My Motor PhreakV's Avatar
    Join Date
    Sep 2003
    Location
    KC, MO
    Posts
    968
    Donated: $13.37

    next time try to get your hands on a pinstripe removing wheel. it fits right into your drill and makes really quick work of stuff like this.

    BE SURE TO NOT LET IT REST IN ONE SPOT TOO LONG THOUGH!!!
    (yes caps were necessary as if you screw around and press too hard or leave the wheel in one spot too long the paint goes with it...) just take it easy at first and within a couple of inches of it you'll have the hang of it.
    2002.5 Classic Red Protege5 R.I.P. 01-03-2005AEM SRI, 03.5MSP axleback, DG AutoEXE lip, Kartboy SS/Bushings, Team Voodoo Spun Aluminum shift knob, shaundarbie Shift boot, www.03msp.com Aluminum dead pedal, MSP Kenwood HU, 03 MSP Pocket, MSP Kenwood speakers, 323Astina SP20 badging, BlueBatMobile Fog overlays, Tinted corners/sidemarkers/tails, 35% tint, 'MP5' engraved oil cap, Magnetic drain plug, Painted valve cover/fusebox, Fog light mod, Window mod, Removed chrome headlight housings
    2003 Aztec Red Spec-V Custom-made 16" Rota Boosts in Bronze/AEM cai/ES mmi/Nismo Graphics Kit/Greddy Evo2 catback/Eibach Pro-Kits/Tinted Tails/GrafxWerks.com Setup/OnStar antenna/Impulse Mechanism Pulley/Nismo Radiator Cap/Active Tuning gw/Hondata IM spacer/Tarmaq 4pt LTB/Hotshot Header
    SHIFT_Recall

  12. #12
    Registered User blue06mazda6's Avatar
    Join Date
    Feb 2009
    Location
    Middletown, PA
    Posts
    56

    Another thing that helps is rubbing alcohol. Thats what i used on my side moldings last week. It just eats right through the glue.
    06 6 I| Xm Radio|Stubby Antenna|Silverstar turn Signal bulbs (Front)|6 1/2 speakers in front door|6 x 8 in rear|Wing Spoiler|Black OE Tail lights|4 Brake light mod|Side markers converted to flash|18 x 7.5 MB Boost rims|Remote Start|LED Map and Door lights|Sport Grill|Auto Dimming Mirror| MS Springs| JDM Visors| K & N SRI|Sony HU|12 in. Infinity Sub @ 400 RMS|Removed Door moldings|


    Car Pics

+ Reply to Thread

Similar Threads

  1. Cam install proceedure.
    By curt2go in forum Protegé based Performance
    Replies: 9
    Last Post: 07-06-2007, 04:12 AM
  2. Eibach Install Notes (High Res Pics)....
    By stingfish in forum Mazda3/MS3 How-To
    Replies: 19
    Last Post: 11-19-2006, 06:40 AM
  3. plz help!!! how do i remove spyware from my cpu!!!!
    By 2003.5msp in forum Off Topic
    Replies: 13
    Last Post: 07-12-2004, 07:46 PM
  4. MOMO Anyone?
    By G_MAN75 in forum Protegé based Appearance
    Replies: 24
    Last Post: 09-09-2003, 08:38 PM
  5. Replies: 3
    Last Post: 03-03-2003, 06:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts