Mazda of the Month | ENTER NOW for June!

Status
Not open for further replies.

Antoine

Administrator

Please note the following rules & guidelines.
Your cooperation and participation would be greatly appreciated, thank you.​

ENTRY RULES:

* You must own the Mazda you are entering into the contest

* Any form of photo/image manipulation is not allowed except for adjusting and enhancing image color, contrast, tone and levels etc

* If you wish to enter two or more times in a row, you will need all new photos of your Mazda for each consecutive month entered

* Once you have entered (posted) your Mazda, you may not withdraw from the contest

* The MOTM contest & rules are subject to change in order to maintain a fair & fun environment for the Mazdas247 Community

ENTRY REQUIREMENTS:

1. Username
2. Name
3. Year and Model
4. Minimum 2 pics / Maximum 5 pics of your Mazda *NO ATTACHMENTS PLEASE!
5. List of CURRENT modifications *NO "WAITING TO BE INSTALLED" MODS PLEASE!

--------------------------------------

EXAMPLE:

Antoine
Antoine *
1995 Eunos Cosmo

3034361674_7fc3f75417_z.jpg


3190674418_cc35ac2a4c_z.jpg


3816167695_72f391b493_z.jpg


- Hi-Per Coolant
- Redline Diff Oil
- Autoexe Intake
- Autoexe Springs
- Volk Racing Rims
- Redline Tranny Fluid
- Blitz Boost Controller
- MAZDASPEED Exhaust
- Speedmaster Engine Oil
- Optional Factory Aerokit
- Paint Protection Coating
- Carbing Front Strut Brace
- Autoexe Spark Plug Wires
- Alpine Navigation Headunit
- Yokohama DNA S.drive Tires
- Defi Boost Gauge & OLED Display
- Upgraded Original Headlights (HID)
- Carbing Cooling Plate (not pictured)
- Custom Center Console and Glovebox

--------------------------------------

PRIZES:

Provided by the International Motor Sports Association | IMSA.com

* Hot Pass for Winner and Guest at one of the Winner's choice of TUDOR Championship races

* Behind the Scenes Tour including being on the Starting Grid for the race, Transporter Tours and a visit to Race Control

* Exclusive Pit Lane access during race

Many thanks to the IMSA | TUDOR United SportsCar Championship for this fantastic prize!

In addition to...

+ Free Basic Custom Shift Boot * Boot compatible with NA & NB Miata, Gen 1 and 2 RX-8, Gen1 and 2 MAZDASPEED3 / Mazda3, 3rd Gen Protege and MAZDASPEED6 / Gen1 Mazda6 * OR + 20% of next purchase up to $200 THANKS TO FattiMotorWorks.com

+ Your Mazda showcased on the Mazdas247 Home Page!

+ A Mazdas247 T-Shirt and a pair of Mazdas247 Decals!

-> Sponsor a Future MOTM...PM Antoine for details!

VOTING RULES:

* Votes only count for the MOTM from those Members that have joined Mazdas247 during the previous month or before

* There is NO tolerance for PERSONAL CAMPAIGNING threads, posts, private messages (PMs), images or links (including signature and or image links). The creation of such ANYWHERE on or off the Internet including Mazdas247 will result in immediate disqualification...If you are disqualified, your entry & poll listing WILL remain but your votes will be removed

* Creating GENERAL "Vote for the MOTM" threads and links is allowed and encouraged

GOOD LUCK AND HAVE FUN!
 
This month's theme is...

Wheels & Suspension (show us your Mazda's sexy wheels and hot suspension setup)

PLEASE DO NOT ENTER if your Mazda does not match the above theme, thank you!

DEADLINE to ENTER is June 16th '14!

NOTE: Please keep this thread ON TOPIC.

Thank you and once again, good luck!
 
I suppose I'll start it off, first entry on here for MOTM, might as well give it a shot:

steelwagon6
Blake Reeves
2004 Mazda 6s Wagon

zoPwjWb.jpg

dnvXBbl.jpg

S0F3Cff.jpg

EtAuogP.jpg


Wheel/Brake Setup:
Custom Candy Teal Plastidipped MSR 088 wheels - 19x8.5 +24
NeoChrome Lug Nuts
EBC Ultimax Front/Rear Rotors
Hawk HPS Front/Rear Pads
StopTech SS Front/Rear Brake Lines
Custom Blazing Copper Painted Calipers

Suspension:
KSport Coilovers
SPC Adjustable Front Ball Joints
AWR Adjustable Endlinks
GT-Spec Replica Strut Tower Bar
KYB Rear Shocks

Engine:
Injen Super SES Cat-Back Exhaust (custom welded for the wagon)
Injen SP Cold Air Intake
AWR Wishbone Engine Mount
Denso Iridium Spark Plugs
Throttle Body Ground
JNA Air Diversion Panel
NeoChrome accents

Exterior:
VIS Monster CF Hood
Retrofitted '05 WRX STI Chargespeed Lip
Retrofitted Lexus IS350 Side Lips
Smoked LED rear reflectors
LED License Plate Lamps
Mazdaspeed Stubby Antenna
Plastidipped Emblems
Plastidipped Sports Grill
Custom License-Plate Relocate
Mesh Bumper Grille
Smoked Side Markers
DDM 6000K HID Kit
Xenon Super White Reverse Lamp Bulbs
Xenon Super White High Beam Bulbs
55W Xenon Fog Lamp Bulbs
06 Tinted Chrome Tail Lamps

Interior:
Corksport LED Conversion
Infinity 12" Sub
Alpine 700W Amp
Grom iPod Link
Custom gooseneck iPhone holder
 
Last edited:
Rar40941
Reg rivera
Mazda protg 5
engine:

-Injen cold air intake*
-hks hi-power axle back*
-resonator delete*
-Samco radiator hose kit
-all 4 AWR engine mount 95 durometer
-painted valve cover*
-Ngk speak plugs And wires*
- Cruise control delete*
- windshield wiper fluid delete*
-corksport brass shifter bushings*
-CORKSPORT Shifter Bushings For Protege
- goodridge clutch line
- exedy racing stage one clutch*
-Fidanza Flywheel 7.5lb MSP
-.71 5th Gear Set MSP
-Mfactory LSD MSP
-LSD install kit*
-signature sounds coolant Reservoir*
-Air Diversion Panel from CR3 Motorsports*
-A/C delete*
-power steering delete*
- mini wire tuck*
-windshield wiper motor delete*


interior:

-rockford fosgate prime 6x8*
-330.3 viper alarm
-protege garage adjustable*Short throw shifter
-auto power roll bar*
-F1 spec raceing seats
- sparco sliders, wedge engineering brackets*
-pioneer deck*
-white LEDs*
-no back seats*
-gt spec rear trunk brace*
- nrg quick release and hub adaptor fromslammedenuff.com*
-takata rep. 4 point racing harnesses*
- limited do work son grip royal wheel stripped and paint to match cage

suspension:*

- BC BR coilovers shortened 2 inchs struts and springs with 600 front spring rate and 900 rear.
-ksport rear camber plates*
-awr endlinks front*
-*AAC rear lateral link kit
- race beat rear sway bar*
- gt spec rear trunk brace*
-Kmr Rear V Brace
-Kmr Rear Link Reinforcement Panel
- Pedders Front Control Arm Bushings Protege
- gt spec front strut bar*

exterior:*

-badge delete*
-racing direction 17x11 -11 offset rebuilt by memoryfab*
-toyo proves t1-s*
-blacked housed headlights*
-fog light delete*
-5k hids low beam*
-yellow high beams
-dgm front lip
-spray painted calipers
-bumper latches*
-custom fiber glass fender flares
-shorty antenna
-jdm tail lights*
-roof rack delete
-trim delete
-wink mirror*
-panted rear defuser*
-amber lisence plate lights*
- windshield wiper motor delete*
- rear wiper delete*











 
Well now that he entered I have no chance of winning but whatever I'm bored at work. My first post here; some of you may know me from 6club or Stanceworks.

Rightfullrudder
Ben Zalutsky
2009 Mazda6 3.7L Sport

14032852559_6e1702b1b9_b.jpg


rightfull.png


y6sEZoe.jpg


V2c9pam.jpg


PFg2oxG.jpg


Mods:
- D2 Racing RS coilovers, rear collars removed, bumpstops removed
- Injen intake set as CAI with hydroshield on filter
- Borla Pro XS mufflers attached to custom Y-pipe with resonator delete
- AME Shallen CX 19x9 +20 19x10 +25 with 225/35 and 225/40 tires
- Homemade front lip
- Fenders pulled to oblivion, no front splash guards
 
Digi Camo Rims and Air Ride should work here.
hmxHu5h.jpg

aR6q98p.jpg

092-1140x760.jpg

Suede Interior (with dash) and digi camo to match rims.
E8Vx94L.jpg

xlE7WYj.jpg


Mod list

**Exterior**
Custom Audi Style LED Headlights w/ red projector accent leds.
Nextmod Eyelids
RHO Plate
OEM Sideskirts
OEM Rainguard
OEM Rear lip spoiler
OEM Foglights
6000k HID Low Beam
Black Emblems
Blacked Out Tail Lights
Blacked Out Side Markers
Matte Black Vinyl Roof
Red Calipers
Red forward facing Hella Horns
Rolled & Pulled Rear Fenders
MZ Front Lip

**Wheels/Suspension**
Black & Grey Camoflage Hydrodipped
-XXR 530 18x8.75 +30mm
-XXR 530 18x9.75 +15mm (Corrected)
AirRex Front Struts
Airlift Shocks
AirRex Extended Sleeves
VIAIR 440C Compressor
Air Lift V2 Management System
Metallic Apple Red 5 Gallon Air Tank
Falken FK-453 215/35/18
Nankang NS2 215/40/18
Dominant Engineering Adjustable Camber Arms (-7 Camber)

**Interior**
Black & Grey Camo Hydrodipped
-Door Handles
-A|B|C Pillars
-Interior Trim
Suede Door Cards
Suede Arm Rests
Suede Dash
Red Stitch leather boot
Weathertech Mats
Red Footwell Lights
Black Sun Visors
Corksport LED Interior Lights
Custom Trunk Lighting
Custom Suede Trunk Floor


**ICE**
OEM Style Double Din w/ Navigation & Rearview Camera
JL TR650-CSi 2x Tweeter, 2x Woofer
JL TR570-CXi 2x Coaxial Speakers
JL JX360W 4 Channel Amp
JL JX500/1D Monoblock Amp
JL 12W0V3 Subwoofer
Ported Bassworx Box
Viper 5906 Two Way Security System



**Engine**
Custom Tune
AFR tuned for 12.9-13.2
VVT cam table advanced
Ignition tables completely tuned for 91 octane
RPM limiter adjusted
Speed limiter adjusted
Linear throttle maps.
Metal Shifter Bushings
Vibrant 4-2-1 Catless Headers
Corksport Cat Back Exhaust
Corksport High Flow Cat
Corksport Urethane Exhaust Hangers
Corksport 75 Duro Rear Motor Mount
Ractive SRI
NGK Primary O2 Sensor
NGK Secondary O2 Sensor
 
Last edited:
ffocused.
Alex Perrucci
2002 Sunlight Silver Protege ES

IMG_3882-3 by alexperrucci, on Flickr

IMG_3898-8 by alexperrucci, on Flickr

IMG_3670-7 by alexperrucci, on Flickr

IMG_3672-8 by alexperrucci, on Flickr

IMG_3416-1 by alexperrucci, on Flickr

Suspension/Wheels:
Ksport Coilovers
AAC Adjustable Endlinks
Rotiform NUE 17x8 +20F/+30R 205/40/17 Ohtsu FP7000
OZ Racing Monte Carlo 17x8 +37 205/40/17 Falken 912
ARP Exteneded studs (front)
Motorsport Tech 10mm hubcentric spacers (front)

Exterior:
OEM Sedan lip
OEM Side Skirts
EGR Rear Window Visor
03.5 Mazdaspeed Protege wing
03.5 Mazdaspeed Protege muffler
Black housing headlights
All red tails
Yellow lamin-x fogs

Engine:
Injen CAI
1.8 Coils/Wires
MSM Oil Cap
AWR 88 duro front motor mount

Interior:
CF Gauge bezel
Polished Dave B rings
MOMO e-brake handle
Color matched trim
 
thelowerclass
Shea McGlone
2010 Mazda 3 GT

5mzwc7.jpg

rc99hx.jpg

Fitted2014-17-650x431.jpg

CamberRollingShot.jpg

2di3qrr.jpg


Wheels & Suspension
18x9.5 +32 (corrected) Work Meister S1R w/ 215/35R18 Falken FK453
18x10.5 -3 (corrected) Work Meister S1R w/ 225/40R18 Falken FK453
KW V2 Coilovers (minus helper springs)
Corksport Prototype Camber Plates
Dominant Engineering Camber Arms
Racing Beat Rear Sway Bar

Bodywork
Rolled and Pulled fenders (front and back)
Shaved bumper tabs
Nextmod GV Replica front lip
Nextmod Mz Replica rear lip kit
OEM Replica side skirt (OEM blew off driving through North Dakota)
GV Eyelids
VHT Nightshade Red tails
Lamin-x Fogs
Red Painted calipers

Performance (rlaugh)
Mazdaspeed 3 OEM CBE, custom straight pipe exhaust
Ractive SRI
 
So by the entries im guess rims and suspension means "stancenation" type cars?......Its a serious question. Like if you had a more tuned for circuit time attack and autoX type setup and still had nice wheels you dont qualify?
 
Think it's more who has a nice wheel and suspension set up I am guessing track cars can have a nice wheel and suspension set up as well not just stance guys have nice set ups
 
Think it's more who has a nice wheel and suspension set up I am guessing track cars can have a nice wheel and suspension set up as well not just stance guys have nice set ups

BINGO!

Any Mazda whose Owner thinks has a nice suspension and wheel setup is welcome to ENTER! That means any kind...Street, AutoX, Race cars, "Stance", Bagged, Off-Road, Time Attack etc etc etc...

Please note this is NOT a debate thread, this is an ENTRY thread. I will NOT tolerate any BS arguments / Drama, thank you.
 
Great to see a bunch of entries already...Spread the word, people...The more the merrier and bring on the variety! :D
 
In an industry of "played-out" everything, that digital camo is legit. Never seen wheels like that.
 
Ya I just wish he did that to some bbs' s that would look so good

Sent from my SM-N900V using Tapatalk
 
BINGO!

Any Mazda whose Owner thinks has a nice suspension and wheel setup is welcome to ENTER! That means any kind...Street, AutoX, Race cars, "Stance", Bagged, Off-Road, Time Attack etc etc etc...

Please note this is NOT a debate thread, this is an ENTRY thread. I will NOT tolerate any BS arguments / Drama, thank you.

Woot woot! Antoine could you change the theme to Wheels and Suspension? Technically a rim is only part of a wheel, and with everyone in this having such nice wheels, it would be nice to use the correct terminology :)
 
lol I wasnt trying to start anything it was a serious question. I been wanting to enter for awhile now but didnt meet any of the new qualifications :) I will enter now I guess


1. Kulluminati777
2. Arnold D
3. 1993 MX-3


vwnZPpU.jpg

w5GW04G.jpg

at1z5Xf.jpg

L48vQtz.jpg

ilT3y32.jpg








AERO PARTS/VISUAL

+Full Authentic A-spec touring kit from japan.
-Mazdaspeed wing
-Mazdaspeed side skirts
-Mazdaspeed front nose with lip
+Acura RSX type S rear Under-spoiler
+Advan Carbon OEM style Carbon fiber hood
+Yachant Carbon fiber moonroof
+4300K HIDs
+Tuned by mazdaspeed sports factory badge on the rear.
+Mazdaspeed white bonnet badge (Type B) hood
+Rare OEM plastic headlight covers


INTERIOR


+MX-3 stamped Aluminum pedals
+MX-3 stamped scuff plates
+Carbon Fiber dash bezel with chrome speedometer rings
+Mazdaspeed Carbon look shift knob
+Mazdaspeed B-Spec steering wheel with carbon look ring and Mazdaspeed horn pad
+Mazdaspeed Black Sport seats
+Custom acid etched Mazdaspeed rear view mirror
+Double din Pioneer deck
+Chrome 626 door handles with carbon look door cups


Powerplant


+Naturally aspirated 2.5L KLZE
+Silla Aluminum Radiator
+Outlaw Intake manifold and throttle body thermoblock spacers
+Hoodzy's Cold Air Intake
+MSD Blaster 3 external coil
+NGK plug wires
+Pertronix Flame Thrower HEI module
+Fidanza Aluminum Flywheel
+Mazdaspeed Limited slip differential
+Corksport Stainless steel clutch line
+AWR Engine mounts Front and Rear
+Mazdaspeed oil cap
+Mishimoto Oil catch can
+Mazdaspeed Exhaust

Suspension/Brakes/Wheels

+Mazdaspeed MS-01 wheels
+25mm Ichiba wheel spacers on front and rear
+Ceika 6 pot calipers, 11.5" slotted rotor, and stainless steel lines
+SRD aluminum front cross member
+SRD aluminum rear tie bar
+Mazdaspeed front strut bar
+Corksport Type I rear strut bar
+Traction Bar on Lower control arms
+K-sport Coilovers
+Mazdaspeed Front Swaybar
+Mazdaspeed Rear Swaybar
+ZX2 trailing arms
 
Status
Not open for further replies.
Back