Mazda of the Month | ENTER NOW for June!
- Thread starter Antoine
- Start date
- Status
Herblenny
Phil Sohn
1993 RX7
Engine:
- Adaptronic ECU for FD PNP (http://www.turblown.net/store/index.php?productID=280)
- Garfinkle Delrin Custom mounts
- Pettit Polished AST
- Koyo N-Flow Radiator
- Custom Carbon Fiber Cooling panel
- Fast acting AirTemp sensor
- BNR Stage 3 Twin Turbos
- Ported 13B-REW engine
- Custom Grounding kit
- Polished Efini Y-pipe
- Polished upper intake manifold
- Polished 90mm Rotary Works Throttle body
- Polished Greddy elbow w/injector ports
- Apexi GT Spec FMIC
- Custom polished pipings By: BNRSupercars.com
- Constant tension T-blot clamps for IC pipings and Intakes.
- HKS seq. BOV
- HKS twinpower ignition amp
- RE-Amemiya SS Dual Dolphin Tip Catback
- SS Pettit DP
- Mazdaspeed ignition wires
- FEED oil filler cap
- FEED coolant filler cap
- Added R1 Dual oil coolers
- Braille light battery
- Braille Verticle mounting kit
- Unorthodox Alternator pulley (red)
- Unorthodox Power steering pulley(blue)
- Exedy Hyper Single Clutch Kit
- Simplified seq twin set up
- Polished hardline intake pipes for secondary intake.
- Ported JDM Upper Intake manifold and polished by David Garfinkle.
- Also all the misc. vacuum ports have been welded shut and cleaned up and polished for cleaner look.
- Pettit Racing water pump pulley
- 2 x 4 blade fan set up for better cooling
- HKS RS intake with KN filters
- Tweakit Racing tensioner pulley kit
Suspension:
- M2 launch kit
- FEED coilovers
- Fender Braces
- Racing Beat sway bar brace
- Racing Beat sway bars (front and rear)
- AutoEXE front brace
- Racing Brake Rear Brake kit with HP+ pad
- Hawk HP+ pads rear
- Newly sandblasted A-arms and other suspension parts
- SakeBomb AP Racing Big Brake Kit with Ferrado pads
- Braided SS brake lines
- Racing Beat sway bushings
- New Delrin bushings for all suspension parts
- Transmission brace
- Raceshop Rollbar
- Dragon’s diff brace
- Rays Engineering Volk Racing RE30 Diamond Black 189.5 Front and 1810.5 Rear with GT limited Carbon Fiber center caps.
- Toyo R888s 255/35 front and 295/30 rear
Interior & Stereo:
- Works Bell Short hub
- Works Bell Quick disconnect
- Works Bell hub lock
- Personal Steering wheel
- Converted Black interior – including, door panels, rear panels, head liner, seat belts, and black main carpet
- RZ floormats
- Rare moon roof interior cover
- JDM rear seats with panels, seat belts, and special rear carpet
- Bride Artis III Navi
- FEED Shift knob
- Red leather stitching shift and ebrake boots
- LED interior lights
- RE-Amemiya steering column pod with 52mm Prosport boost gauge
- JKL Engineering Carbon Fiber Gauge cluster, hood AC panel, shifter,etc (Flattened look)
- JVC 7inch AV system
- RE-Amemiya speedo cluster gauge
- FEED Carbon fiber rear trunk add on.
- Base model hatch cover
- OEM fog light switch to turn FEED HID driving lights
- Carbon look oem door step
Exterior:
- Plasti Dip Storm Cloud Grey exterior (www.DipYourCar.com)
- Carbon Vented hood
- APR GT300 with custom aluminum stands by Adam Griffith
- One off Feed Carbon Gas door (Shine Auto)
- Feed Type 2R front bumper
- Feed Carbon fiber canards
- Feed Carbon Fiber side skirts
- Feed wide front fenders
- FEED rear wide flares
- Rotary Extreme hood dampers
- R-magic oil cooler ducts
- FEED front tow hook
- Adam Griffith rear tow hook
- RE-Amemiya Pro Carbon rear diffuser
- Custom LED tail lights
- Custom rear bumper CF signal covers
- Rare glass moon roof
- LED signal lights in FEED signals
- HID FEED Signal lights
- Spirit R fender badges
- Efini front are rear badges
- Carbon look rear bumper lights
- Carbon fiber FEED gas door (one off made)
- APR Carbon Fiber side Mirrors
- Custom front canard add on
- Carbon Cooling panel (custom, made by me)
- LED Front bumper strips
- R-Magic HID head lights
- FEED door handles
- Carbon Fiber back of the door handle covers.
- Back Off 3rd light flasher
- ShineAuto rear tail light lip
- Feed carbon Fiber bumper guard by Shine Auto
Phil Sohn
1993 RX7
Engine:
- Adaptronic ECU for FD PNP (http://www.turblown.net/store/index.php?productID=280)
- Garfinkle Delrin Custom mounts
- Pettit Polished AST
- Koyo N-Flow Radiator
- Custom Carbon Fiber Cooling panel
- Fast acting AirTemp sensor
- BNR Stage 3 Twin Turbos
- Ported 13B-REW engine
- Custom Grounding kit
- Polished Efini Y-pipe
- Polished upper intake manifold
- Polished 90mm Rotary Works Throttle body
- Polished Greddy elbow w/injector ports
- Apexi GT Spec FMIC
- Custom polished pipings By: BNRSupercars.com
- Constant tension T-blot clamps for IC pipings and Intakes.
- HKS seq. BOV
- HKS twinpower ignition amp
- RE-Amemiya SS Dual Dolphin Tip Catback
- SS Pettit DP
- Mazdaspeed ignition wires
- FEED oil filler cap
- FEED coolant filler cap
- Added R1 Dual oil coolers
- Braille light battery
- Braille Verticle mounting kit
- Unorthodox Alternator pulley (red)
- Unorthodox Power steering pulley(blue)
- Exedy Hyper Single Clutch Kit
- Simplified seq twin set up
- Polished hardline intake pipes for secondary intake.
- Ported JDM Upper Intake manifold and polished by David Garfinkle.
- Also all the misc. vacuum ports have been welded shut and cleaned up and polished for cleaner look.
- Pettit Racing water pump pulley
- 2 x 4 blade fan set up for better cooling
- HKS RS intake with KN filters
- Tweakit Racing tensioner pulley kit
Suspension:
- M2 launch kit
- FEED coilovers
- Fender Braces
- Racing Beat sway bar brace
- Racing Beat sway bars (front and rear)
- AutoEXE front brace
- Racing Brake Rear Brake kit with HP+ pad
- Hawk HP+ pads rear
- Newly sandblasted A-arms and other suspension parts
- SakeBomb AP Racing Big Brake Kit with Ferrado pads
- Braided SS brake lines
- Racing Beat sway bushings
- New Delrin bushings for all suspension parts
- Transmission brace
- Raceshop Rollbar
- Dragon’s diff brace
- Rays Engineering Volk Racing RE30 Diamond Black 189.5 Front and 1810.5 Rear with GT limited Carbon Fiber center caps.
- Toyo R888s 255/35 front and 295/30 rear
Interior & Stereo:
- Works Bell Short hub
- Works Bell Quick disconnect
- Works Bell hub lock
- Personal Steering wheel
- Converted Black interior – including, door panels, rear panels, head liner, seat belts, and black main carpet
- RZ floormats
- Rare moon roof interior cover
- JDM rear seats with panels, seat belts, and special rear carpet
- Bride Artis III Navi
- FEED Shift knob
- Red leather stitching shift and ebrake boots
- LED interior lights
- RE-Amemiya steering column pod with 52mm Prosport boost gauge
- JKL Engineering Carbon Fiber Gauge cluster, hood AC panel, shifter,etc (Flattened look)
- JVC 7inch AV system
- RE-Amemiya speedo cluster gauge
- FEED Carbon fiber rear trunk add on.
- Base model hatch cover
- OEM fog light switch to turn FEED HID driving lights
- Carbon look oem door step
Exterior:
- Plasti Dip Storm Cloud Grey exterior (www.DipYourCar.com)
- Carbon Vented hood
- APR GT300 with custom aluminum stands by Adam Griffith
- One off Feed Carbon Gas door (Shine Auto)
- Feed Type 2R front bumper
- Feed Carbon fiber canards
- Feed Carbon Fiber side skirts
- Feed wide front fenders
- FEED rear wide flares
- Rotary Extreme hood dampers
- R-magic oil cooler ducts
- FEED front tow hook
- Adam Griffith rear tow hook
- RE-Amemiya Pro Carbon rear diffuser
- Custom LED tail lights
- Custom rear bumper CF signal covers
- Rare glass moon roof
- LED signal lights in FEED signals
- HID FEED Signal lights
- Spirit R fender badges
- Efini front are rear badges
- Carbon look rear bumper lights
- Carbon fiber FEED gas door (one off made)
- APR Carbon Fiber side Mirrors
- Custom front canard add on
- Carbon Cooling panel (custom, made by me)
- LED Front bumper strips
- R-Magic HID head lights
- FEED door handles
- Carbon Fiber back of the door handle covers.
- Back Off 3rd light flasher
- ShineAuto rear tail light lip
- Feed carbon Fiber bumper guard by Shine Auto
Last edited:
Antoine
Administrator
Although the purpose of the MOTM is to have FUN, we do have prizes to "sweeten" things up a bit!
Here's a reminder of the current prizes available to the winner...
PRIZES:
Provided by the International Motor Sports Association | IMSA.com
* Hot Pass for Winner and Guest at one of the Winner's choice of TUDOR Championship races
* Behind the Scenes Tour including being on the Starting Grid for the race, Transporter Tours and a visit to Race Control
* Exclusive Pit Lane access during race
Many thanks to the IMSA | TUDOR United SportsCar Championship for this fantastic prize!
In addition to...
+ Free Basic Custom Shift Boot * Boot compatible with NA & NB Miata, Gen 1 and 2 RX-8, Gen1 and 2 MAZDASPEED3 / Mazda3, 3rd Gen Protege and MAZDASPEED6 / Gen1 Mazda6 * OR + 20% of next purchase up to $200 THANKS TO FattiMotorWorks.com
+ Your Mazda showcased on the Mazdas247 Home Page!
+ A Mazdas247 T-Shirt and a pair of Mazdas247 Decals!
Don't be shy, let's see more entries...There's still time!
Here's a reminder of the current prizes available to the winner...
PRIZES:
Provided by the International Motor Sports Association | IMSA.com
* Hot Pass for Winner and Guest at one of the Winner's choice of TUDOR Championship races
* Behind the Scenes Tour including being on the Starting Grid for the race, Transporter Tours and a visit to Race Control
* Exclusive Pit Lane access during race
Many thanks to the IMSA | TUDOR United SportsCar Championship for this fantastic prize!
In addition to...
+ Free Basic Custom Shift Boot * Boot compatible with NA & NB Miata, Gen 1 and 2 RX-8, Gen1 and 2 MAZDASPEED3 / Mazda3, 3rd Gen Protege and MAZDASPEED6 / Gen1 Mazda6 * OR + 20% of next purchase up to $200 THANKS TO FattiMotorWorks.com
+ Your Mazda showcased on the Mazdas247 Home Page!
+ A Mazdas247 T-Shirt and a pair of Mazdas247 Decals!
Don't be shy, let's see more entries...There's still time!
Filthaypinoy206
Member
- :
- Mazda 3 S GT 2008
Filthaypinoy206
Kenneth Pabillon
Mazda 3 2008 sedan
engine:
-cf hood risers
-AEM sri
-Corksport exhaust with high flow cat
-all AWR engine mounts
-Mazdaspeed spark plug cover
interior:
-JL audio 500watt amp
-JL audio 12' sub
-pioneer Avic X930BT
-white Diamond Technology LEDs
-Suede Pillars and headliner
-Black gloss wrapped double din holder
-Black gloss wrapped center console
-Crown Royal black suede XXR bag as shift boot
-teal dildo shift knob
Wheel/Brake setup*
-R1 concept slotted rotors
-EBC brakes front & back
-2 sets of rpf1s
1. my current (daily wheels) was painted lime green but powder coated candy teal RPF1s 17x9+ 45 (with spare wheel)
2. my other set Candy Purple RPF1s 17x8+35 (with spare wheel)
-neo chrome extended project kics lug nuts
-corksport stainless steel brake lines
-painted gloss black calipers
suspension:*
- KW V2 Coilover
-Dominant rear camber plates*
- tripoiont rear sway bar*
-gt spec rear trunk brace
-gt spec front brace
-gt spec front rear and tie bars
-gt spec v braces
exterior:*
-JDM goodies slim rain visors
-Diamond Technology 6K HID lows, high beam, LED turn sigs,
-The retrofit source clear lens
-Rep auto exe Front bumper
-open mouth grill
-Candy teal hella horns
-APR custom splitter
-eye lids
-cf wrapped roof
-cf wrapped sharkfin antenna
-cf wrapped valance
Kenneth Pabillon
Mazda 3 2008 sedan
engine:
-cf hood risers
-AEM sri
-Corksport exhaust with high flow cat
-all AWR engine mounts
-Mazdaspeed spark plug cover
interior:
-JL audio 500watt amp
-JL audio 12' sub
-pioneer Avic X930BT
-white Diamond Technology LEDs
-Suede Pillars and headliner
-Black gloss wrapped double din holder
-Black gloss wrapped center console
-Crown Royal black suede XXR bag as shift boot
-teal dildo shift knob
Wheel/Brake setup*
-R1 concept slotted rotors
-EBC brakes front & back
-2 sets of rpf1s
1. my current (daily wheels) was painted lime green but powder coated candy teal RPF1s 17x9+ 45 (with spare wheel)
2. my other set Candy Purple RPF1s 17x8+35 (with spare wheel)
-neo chrome extended project kics lug nuts
-corksport stainless steel brake lines
-painted gloss black calipers
suspension:*
- KW V2 Coilover
-Dominant rear camber plates*
- tripoiont rear sway bar*
-gt spec rear trunk brace
-gt spec front brace
-gt spec front rear and tie bars
-gt spec v braces
exterior:*
-JDM goodies slim rain visors
-Diamond Technology 6K HID lows, high beam, LED turn sigs,
-The retrofit source clear lens
-Rep auto exe Front bumper
-open mouth grill
-Candy teal hella horns
-APR custom splitter
-eye lids
-cf wrapped roof
-cf wrapped sharkfin antenna
-cf wrapped valance
Last edited:
Antoine
Administrator
VOTE NOW for June! (thumb)
- Status
