rar40941's build thread

(thumbs) hi guys i am posting this thread. so i can get some help on my car and also to show u what i have don to it already.

i will show u all the mods i have don to my car. also what i am planing on doing to my car

engine:

-Injen cold air intake*
-Samco radiator hose kit
-all 4 AWR engine mount 95 durometer
-powder coated valve cover and strut bar and intake to match *
-Ngk speak plugs And wires*
- Cruise control delete*
- windshield wiper reservoir delete*
-corksport brass shifter bushings*
-CORKSPORT Shifter Bushings For Protege
- goodridge clutch line
- exedy racing stage one clutch*
-Fidanza Flywheel 7.5lb MSP
-.71 5th Gear Set MSP
-Mfactory LSD MSP
-LSD install kit*
-Mishimoto coolant Reservoir*
-Air Diversion Panel from CR3 Motorsports*
-A/C delete*
-power steering delete*
- mini wire tuck*
-windshield wiper motor delete*
-mishimoto radiator and fan shroud
-mishimoto oil catch can
-626 shaved intake manifold
-Jay racing thermal spacers
-custom t3 custom exhaust manifold
-280zx t3 turbo
-custom down pipe and 3 inch exhaust catless
-tail 38 mm external waist gate
-tail 38 mm bow off valve
-hallman manual boost controller
-custom intercooler piping
-front mount intercooler
-battery relocation
-Mazda speed 2003.5 ecu
-tuning ssafc split second piggy back
-oil sandwich for feed line and oil pressure and oil temp senors
-water temp senor holder
-corksport 2.5 inch j pipe
-cr3 Motorsports radiator supports
-fuse distribution block

interior:

-rockford fosgate prime 6x8*
-330.3 viper alarm
-protege garage adjustable*Short throw shifter With 4 inch extender
-auto power roll bar*
-F1 spec raceing seats
- sparco sliders, wedge engineering brackets*
-pioneer deck*
-white LEDs*
-no back seats*
-gt spec rear trunk brace*
- nrg quick release and hub adaptor fromslammedenuff.com*
-takata rep. 4 point racing harnesses*
- limited do work son grip royal wheel stripped and paint to match cage
-aem oil and temp gauge
-aem wideband
-aem boost gauge
-aem oil temp gauge
-deck relocation
-zero gauge wiring for battery relocation

suspension:*

- BC BR coilovers shortened 2 inchs struts and springs with 600 front spring rate and 900 rear.
-ksport rear camber plates*
-awr endlinks front*
-*AAC rear lateral link kit
- race beat rear sway bar*
- gt spec rear trunk brace*
-Kmr Rear V Brace
-Kmr Rear Link Reinforcement Panel
- Pedders Front Control Arm Bushings Protege
- gt spec front strut bar*

exterior:*

-badge delete*
-racing direction 17x11 -11 offset rebuilt by memoryfab*
-toyo proves t1-s 245/35/17*
-blacked housed headlights*
-fog light delete*
-5k hids low beam*
-yellow high beams
-dgm front lip
-spray painted calipers
-bumper latches*
-custom fiber glass fender flares
-shorty antenna
-jdm tail lights*
-roof rack delete
-trim delete
-wink mirror*
-panted rear defuser*
-amber lisence plate lights*
- windshield wiper motor delete*
- rear wiper delete*
-Mazda 3 side skirts
-dg motor sports carbon fiber grill


FUTURE MODS: Corbeau FX1 wide Seats,tacata Drifter harnesses ,wrap my car, wildwood front 6 piston and rear 4 piston, Hydraulic e break,

then go from there(uhm)


check out my YouTube Chanel to see my progress from the stock to hellaflush car i have now.
http://www.youtube.com/user/rar40941?feature=mhee


mods i us to have:
-fi btl 18
-rockford fosgate 2500.1 bdcp
-rockford fosgate 0 gage wireing,rcas,and remote wire
-7 cubic foot box
-stock wheels
-megan racing springs
-tokico blues
-no inner fenders
-xxr 527 17x9.75 wide +25 offset front +15 offset rear
-215/40/17 stretch with falken 502 tires
-fog lights

stock with exhaust and intake and my 18 inch sub woofer

<a href="http://s1213.photobucket.com/albums/cc465/rar40941/car%20pics/?action=view&current=DSC00501.jpg" target="_blank"><img src="http://i1213.photobucket.com/albums/cc465/rar40941/car%20pics/DSC00501.jpg" border="0" alt="Photobucket"></a>

lowered fogs tint black housed head lights

<a href="http://s1213.photobucket.com/albums/cc465/rar40941/car%20pics/?action=view&current=DSC00574.jpg" target="_blank"><img src="http://i1213.photobucket.com/albums/cc465/rar40941/car%20pics/DSC00574.jpg" border="0" alt="Photobucket"></a>

hellaflushed out not slammmed yet

<a href="http://s1213.photobucket.com/albums/cc465/rar40941/car%20pics/?action=view&current=hellaflush1.jpg" target="_blank"><img src="http://i1213.photobucket.com/albums/cc465/rar40941/car%20pics/hellaflush1.jpg" border="0" alt="Photobucket"></a>

now slammed and herraflush

<a href="http://s1213.photobucket.com/albums/cc465/rar40941/?action=view&current=4357ec87.jpg" target="_blank"><img src="http://i1213.photobucket.com/albums/cc465/rar40941/4357ec87.jpg" border="0" alt="Uploaded from the Photobucket iPhone App"></a>

<a href="http://s1213.photobucket.com/albums/cc465/rar40941/?action=view&current=498aff60.jpg" target="_blank"><img src="http://i1213.photobucket.com/albums/cc465/rar40941/498aff60.jpg" border="0" alt="Uploaded from the Photobucket iPhone App"></a>

<a href="http://s1213.photobucket.com/albums/cc465/rar40941/?action=view&current=a084be02.jpg" target="_blank"><img src="http://i1213.photobucket.com/albums/cc465/rar40941/a084be02.jpg" border="0" alt="Uploaded from the Photobucket iPhone App"></a>

know fixed fenders and sexy ass fender flares



Fenders painted and new wheels



wips and chocolate took a picture of my car at hellaflush 13



with dg front lip





with roll bar and racing seats




ok my roll bar, racing seat, wheel and trunk brace



before mint parts

.

after parts where painted mint





new front fender flares and wheels

oh and the other day i ordered

fiber glass fender flares :

https://www.ebay.com (commissions earned)

and hid builbs for fogs:
https://www.ebay.com (commissions earned)

Those are not HIDs... only blue tinted bulbs.

Is I know but hope they work

Not into the hellaflush look but you're car is looking pretty badass. I'll be watching this for sure, particularly for the fender flares. I thought about going that route for both style and an alternative to repairing the northern state's lovely rear quarter rusting (well more like a stall tactic instead of alternative)

Edit"
Oh yeah and I am interested to see how you do the rears with the door lines interrupting the flares.

Thanks man. The rear fenders will be interesting to do. I will find away

sub. your rear fender is ******

sorry didnt mean to sound like a dick, the car is looking good otherwise lol

ya i know the rear fenders are pretty ugly that's y i am doing fender flares lol

How do you plan on working around the rear door gap? Those eBay flares are really just skins, they're meant to work on a coupe like a miata or 240z...just trim back metal and bondo or rivet those onto the existing panel to cover the wider wheels.

I'll be interested to see what you do.

are u worried about getting fiber glass fenders? lim guessing your a guy who wants to go wider, but im not to sure if they can handle any type of wheel contact

what's your plan for the where the rear quarter hits the bumper and rear door? and same for front fender hitting bumper?

Sub

He's running basically 10" wide, does he really needed wider? Lolz

Well guys most likely with the door dam I am going to just have the fender flare go with it so, it's easayer or I will go up more and just cut the fender flare where the door opens and put the rest of the fender on the door. Kauai I don't really want to go wider I just want to clean up my fenders cause it looks like all of then have the herps lol. Another reason I got the fender flare is ; I want to cut like have of the front and rear fenders off so mabey I can go lower. We will see as soon as I get them for sure will post pics.

Thanks guys for all the comments if u have anymore questions. Just ask away

i was thinking about doing the fender flares like this


http://mazdafitment.com/2011/08/31/the-evil-3/

his panels and body lines are no comparison to the protege. good luck man.

very interested in the fender flares. i have my doubts....


but by all means change my mind.

I know his body lines are different but that's what I going to try to do

idk if youve ever seen rocky's car in person, but his fitment is very tight, to pull off fender flares imo you have to have wheels that practically touch the flares. how are you going to execute your fitment?