Persistent Airbag indicator and repair suggestions

alleyes

Member
Hello group, first time here.

I am considering a 2004 Mazda 3 sport with 31000 miles. It is really clean and appears to be a good reason to buy. The only problem is with the airbag indicator. It is always on, even with the passenger seat fully and not loaded. The owner had it scanned with and a B1934 code was returned. The diagnosis that was given was for a faulty clock spring. That however is second in the diagnosis after the SAS module was found to be OK. Please refer to the procedure here. I would really appreciate any advice from "knowledgeable" techs or owners who know about this.

Thanks in advance
 
Back