Mazda of the Month - ENTER NOW for November!

[AFIsnowblind]

there wasn't a post count req for entering was there?

[not yellow]

anyone can enter. just need 100 posts in order to vote.

[Herblenny]

Herblenny
Philip S.
FD RX-7 (1993)

Exterior


Engine Bay


Interior



Engine:

-Petite Polished AST
-Koyo N-Flow Radiator
-Custom Carbon Fiber Cooling panel
-Fast acting Airtemp sensor
-Remote Start/pager/alarm/turbo timer
-BNR Stage 3 Twin Turbos
-Ported 13B-REW engine
-Custom Grounding kit
-polished Efini-Y pipe
-Polished upper intake manifold
-Polished 90mm Rotary Works Throttle body
-Polished Greddy elbow w/injector ports
-Apexi GT Spec FMIC
-Custom polished pipings By: www.BNRSupercars.com
-Constant tension T-blot clamps for IC pipings and Intakes.
-HKS seq. BOV
-HKS twinpower ignition amp
-Tanabe Catback
-SS Petit DP
-Apexi PowerFC
-Racing beat ignition wires
-FEED oil filler cap
-FEED coolant filler cap
-Added R1 Dual oil coolers
-Braille light battery
-Braille Verticle mounting kit
-FC Datalogit
-Unorthodox Alternator pulley (red)
-Unorthodox Power steering pulley(blue)
-Exedy Hyper Single Clutch Kit
-Simplified seq twin set up
-polished hardline intake pipes for secondary intake.
-Ported JDM Upper Intake manifold and polished by David Garfinkle. Also all the misc. vacuum ports have been welded shut and clean up and polished for cleaner look.
-Pettit Racing water pump pulley
-2 x 4 blade fan set up for better cooling
-HKS RS intake with KN filters
-Tweakit Racing tensioner pulley kit

Suspension:
-M2 launch kit
-Coilovers (About to install FEED coilovers)
-Racing Beat sway bar brace
-Racing Beat sway bars (front and rear)
-Garfinkle Motorworks Engine torque brace
-FEED front strut tower brace
-RZ larger front and rear brake calipers
-Hawk HP+ pads front and rear
-Newly sandblasted A-arms and other suspension parts
-Custom Garfinkle Motorwork cross drilled RZ rotors
-Braided SS brake lines
-Racing Beat sway bushings
-New Delrin bushings for all suspension parts
-Transmission brace
-Dragon's diff brace
-WORK XD9 18x10 +38 with 15mm spacer front and 20mm spacer rear
-Michelin PS2 255/35 front 295/30 rear
-Raceshop rollbar with much stronger rear strut tower brace.

Interior/Stereo:
-Converted Black interior - including, door panels, rear panels, head liner, seat belts, and black main carpet
-RZ floormats
-Rare moon roof interior cover
-JDM rear seats with panels, seat belts, and special rear carpet
-added R1 rear speaker pods for 7 speaker system
-Prosport boost, A/F, Fuel, Oil temp gauges
-Prosport center speaker pod
-Bride Exas III seats with Bride rails
-Nardi shift knob
-red leather stitching shift and ebrake boots
-LED interior lights
-Rare red stitch Nardi wheels
-Custom install of Protege cruise control to the Nardi wheel
-RE steering column pod with 52mm Prosport boost gauge
-JKL Engineering Carbon Fiber Gauge cluster, hood AC panel, shifter,etc (not overlay)
-JVC 7inch AV system
-New EL PowerFC commander and holder
-RE-A speedo cluster gauge
-FEED Carbon fiber rear trunk add on.
-Base model hatch cover
-added OEM fog light switch to turn FEED HID driving lights

Exterior:

-One off Feed Carbon Gas door (Shine Auto)
-Feed Type 2R front bumper
-Feed Carbon fiber canards
-Feed Carbon Fiber side skirts
-Feed wide front fenders
-FEED rear wide flares
-RE-A Carbon Fiber N1 hood
-Rotary Extreme hood dampers
-R-magic oil cooler ducts
-FEED front tow hook
-RE-Amemiya Carbon rear diffuser
-99 rear spoiler base
-AutoEXE carbon fiber rear spoiler deck
-MS replica 99 undertray
-Custom LED tail lights
-Odula carbon fiber 99 spoiler covers
-Custom rear bumper CF covers
-FEED head light cover
-rare glass moon roof
-SportTuner HID projector head lights
-LED signal lights in FEED signals
-HID FEED Signal lights
-Spirit R fender badges
-Efini front are rear badges
-Carbon look rear bumper lights
-Carbon fiber FEED gas door (one off made)
-APR Carbon Fiber side Mirrors
-Custom front canard add on
-Carbon Cooling panel (custom, made by me)
-LED bumper strip
-FEED signal light covers
-FEED door handles
-Carbon back of the door handle covers.
-Back Off 3rd light flasher
-ShineAuto rear tail light lip
-Feed bumper guard
-Custom rear tail lights

Recognition:
Booth car for Exedy Racing Clutch
Cover of Modified Magazine Jan. 2010 issue
Last year's MOTM winner

[TWISFM]

great scottt mannn

[goldenboy88]

there wasn't a post count req for entering was there?

No but there is for voting.

[Circuit]

Hey Herblenny, one of your gauges is out =P

[xedosul]

xedosul
claudiu
mazda xedos 6 1997



performance mods:
v6 2000cc 0-100 km/h 8.4 s 224 km/h
engine stock :
ngk sparks and
stock struts bar rear and front
interior :
mp3 head unit blaupunkt
pioneer speeakers
blue led inside the car

exterior:
xenon 6000k and
carbon fiber loks on b pillars
35% tint all around

[The Great NY]

The Great NY
Justin W.
2004 Mazda 6s (Special Edition, lmao)




I'll put up a New engine shot tonite(this will do for now)



Engine/Drivetrain:


-Custom Twin Turbo Setup
-2 Turbonetics T3 Super 60s A/R .36
-Custom 3" Turbo Inlets
-Custom mounted Spearco Intercooler
-Raptor BOV - vta
-Custom SS 321 Piping
-Custom 3" Stainless Steel Exhaust
-Megan Racing M-GT Carbon Fiber Turbo Mufflers
-Vibrant Perfomance 3" Metal Cat & 3" Resonator
-Bosch Copper Plugs gapped @ .025
-Labonte Stage 2 Water/Meth Injection System/AEM Water Meth Injection System
-AEM Methanol Injection Monitoring System
-PowerMod Advanced Engine Management System
-Mustang Cobra 4v Ignition Coils
-EMI Suppressors added Throughout the electrical system
-Throttle Body Coolant Bypass with T-fitting delete
-Fidanza 9 lbs. Lightweight Aluminum Flywheel
-Clutchmasters FX300 Kevlar clutch
-MFactory Prototype Forged Helical LSD
-ARP Ring Gear to Differential Mounting Hardware
-Modified/Optimized EGR system modification
-AWR Lower Rear Bone Mount (95 Durometer Stiffness)
-AWR Upper Transmission Mount (88 Durometer Stiffness)
-AWR Passenger Side Head Mount (88 Durometer Stiffness)
-N2MB WOT Box with 2-step and No-lift Shift Feature
-TWM Short Throw Shifter w/bolt and hold-down modification
- Cordova Motorsports Custom Throttle Body, 60mm polished/ported/optimized w/ knife-edged throttle plate, throttle plate main shaft deleted/trimmed and remounted with countersunk screws
-Custom Lightweight Aluminum Alternator Pulley(limited run item)
-Fluidampr 10% Under-driven Crank Pulley
-Custom Oil Catch Can
-NRG Engine Grounding Kit
-NRG Chrome Hood Dampers(modified by me)
-custom under hood mirror inserts by www.underthehoodinc.com
-Rear hood weather stripping removal(for heat expelling)
-Ported Lower intake Manifold Runners
-O2simulator
-Battery Relocation to Trunk
-ETC Electronic Throttle Controller

Brakes and Suspension:

-Tein S-Tech Lowering Springs
-R1 Concepts slotted and drilled rotors (front and rear)
-Axxis High Performance Ceramic Brake Pads
-Racing Beat Front Sway Bar
-Racing Beat Rear Sway Bar
-AWR Adjustable Sway bar Endlinks
-AWR High Performance Adjustable Sway Bar Endlinks
-GT Spec 6-point ladder brace
-GT Spec Rear Trailing Arms
-Autoexe rear trunk brace
-Motul RBF 600 Racing Brake Fluid (Dry Boiling Point 593 degrees F)
-Tanabe Front Strut Brace
-Techni-Fit Blue Stainless Steel Brake Line Kit
-Techni-Fit Blue Stainless Steel Clutch Line

Exterior:

-Autoexe GG-02 Front Bumper, 2-toned w/ black accenting(not sold in the states)
-Cyber Full Rear Bumper (2-toned w/ black accenting)
-Cyber Side Skirts
-Car-LED Black Housing LED conversion tail lights(one of the first imported sets)
-four way Brake-light Modification
-Speed 6 Black Housing Headlights
-Black headlight eyelids
-Custom Flying “M” Emblems
-Debadged
-Door Guard deletion
-Custom Stainless Polished Engine Cover and Fuse Box Insert
-Blue LED headlight marker lights
-Chrysler Pacifica Stereo Antenna
-Aftermarket Sunroof w/ wind deflector
-Hyperwhite Headlight turn signals
-Fenders Rolled
-Custom Powdercoated and Airbrushed RX-8 wheels w/ Nitto NT-05 235 40 18 TIres
-Powdercoated White Lugnuts - Inverted Style

Interior:

-Full Custom Interior, Embroidering and Upholstery Done by Gillin Custom Design - www.gillincustomdesign.com
-Custom Steering Wheel Airbag
-Blue LED dome lights
-Sony CDX-M9900 cd/dvd/mp3 player head unit
-Sony CDX-757mx ten disk cd changer
-Kicker Solobaric L7 – 10” Subwoofer in custom ported box
-Kicker KX600.1 mono class D amplifier
-Blue LED door sill lights
-Alfa Otto Racing Reverse Glow White Gauge faces
-Stainless Steel Weighted Shift Knob (2 lbs) (Member Front1ine)
-Custom White Accenting throughout the interior
-Custom Center arm-rest with Flying “M”
-Lotek Tri-gauge dash pod
-Glowshift Triple Gauge A-Pillar Pod
-AEM uego wideband O2 gauge and controller
-Prosport Performance Gauges (oil press, oil temp, coolant temp, fuel press, boost/vac)
-Greddy Full Auto Black Turbo Timer
-Greddy Profec B Spec-2 Electronic Boost Controller


i know there is more, but i always forget half the stuff done to the car, lol. if you want more details and detail photos check my build/ride thread here:

http://www.mazdas247.com/forum/showt...isher-6-Thread

3 pics arent enough, lol

[bullshark524]

what color is your rx-7 Herblenny? i love it

[Lawrence C]

^^ 6 is clean! Nice build too!

[mglavina]

This is going to be a tough vote for me and there aren't even that many entries yet, lol. Justin and Andrew have two very clean and well modded 6's, both with tones of work put into them. Also for the 6 family generally the majority of users on this forum are speed 6's. Then I saw that rx-7 and had to change my pants... lol.

Hope to see soem more entries, next year I'd like to enter my car in .

[AFIsnowblind]

I personally don't care for herblennys rx7. Too much emphasis on everything but the car.

The great ny I do love your 6 though. Very clean car

[The Great NY]

^^ 6 is clean! Nice build too!

thanks much appreciated

This is going to be a tough vote for me and there aren't even that many entries yet, lol. Justin and Andrew have two very clean and well modded 6's, both with tones of work put into them. Also for the 6 family generally the majority of users on this forum are speed 6's. Then I saw that rx-7 and had to change my pants... lol.

Hope to see soem more entries, next year I'd like to enter my car in .

yea, thus far arent that many entries. but all the entries are great looking cars.

why wait till next year, throw your car in bro. its all for fun man. you may win and not expect to but you can.

I personally don't care for herblennys rx7. Too much emphasis on everything but the car.

The great ny I do love your 6 though. Very clean car

thanks man.

[shaggylemur]

Wow beautiful shots as normal phil!
but never heard of a twin turbo 6!!!!!

[special--k]

Nice 6.