Shop at EdgeAutosport.com to make your Mazda Go Fast AND Look Good!
Shop at EdgeAutosport.com to make your Mazda Go Fast AND Look Good!
Page 3 of 6 FirstFirst 12345 ... LastLast
Results 31 to 45 of 86

Thread: 2010 MS3 shifting sounds

  1. #31
    1.21 Jiggawatts Stavesacre21's Avatar

    2010 Mazdaspeed3

    Join Date
    Jun 2008
    Location
    Lima, OH
    Posts
    236
    Items for Sale
    Anyone check their cars to try and correlate if only the older 2010's are clunking?

    Just checked mine. Date on the car is 06/09. Pretty early for a 2010 model...

    Lets hear some other birthdates. Make sure to mention if you're hearing the clunks or not.
    2010 Mazdaspeed3
    Liquid Silver Metallic

    Daily Driver

    2002 Corvette Convertible
    Millenium Yellow

    19K miles, Summer ride

  2. #32
    .
    Last edited by DailyDriver; 01-05-2010 at 10:23 AM.

  3. #33
    1.21 Jiggawatts Stavesacre21's Avatar

    2010 Mazdaspeed3

    Join Date
    Jun 2008
    Location
    Lima, OH
    Posts
    236
    Items for Sale
    Door sticker on the inner side of the drivers door B-pillar.

    Sticker looks like this:

    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  4. #34
    .
    Last edited by DailyDriver; 01-05-2010 at 10:23 AM.

  5. #35
    .
    Last edited by DailyDriver; 01-05-2010 at 10:23 AM.

  6. #36
    Registered User Vater's Avatar

    2010 MAZDASPEED3

    Join Date
    Aug 2009
    Location
    Dumfries, VA
    Posts
    92
    Items for Sale
    Mine's 05/09, and while I've heard the noise, I think I can probably count the number of times I've heard it on one hand. And I'm pushing 6000 miles.
    2010 MAZDASPEED3 Black Mica w/Tech Package (purchased 8/8/09)
    1991 Mazda MX-5 Miata (RIP 6/30/09)

  7. #37
    1.21 Jiggawatts Stavesacre21's Avatar

    2010 Mazdaspeed3

    Join Date
    Jun 2008
    Location
    Lima, OH
    Posts
    236
    Items for Sale
    Quote Originally Posted by DailyDriver View Post
    Ok, thanks. That's what I thought. But this pic cannot be your MS3 sticker because it says 07/05. Or am I misunderstanding something?
    Your right, that wasn't my sticker. It was just what came up once i searched it out on google to find a picture to illustrate it. I'm too lazy to physically get out and take a picture of it.

    Quote Originally Posted by Vater View Post
    Mine's 05/09, and while I've heard the noise, I think I can probably count the number of times I've heard it on one hand. And I'm pushing 6000 miles.
    guess that shoots down the whole early-makes only theory. How can something so obvious be so hit-or-miss on a make?? It just baffles me.

    Any others out there with dates they wanna throw in?
    Last edited by Stavesacre21; 11-15-2009 at 02:28 AM.
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  8. #38
    its the bad rear motor mount i think. that's why im getting the aftermarket one.

  9. #39
    Registered User

    2010 Speed 3

    Join Date
    Jan 2010
    Location
    Hickory, NC
    Posts
    598
    Items for Sale
    Well, I was wondering about this also. I hear the sound on my 2010 MS3 with 230miles on it. I have already talked to Mazda about getting aftermarket mounts and they said it would void the warranty. So I guess just turn the radio up until it finally breaks and have it fixed under warranty.

  10. #40
    LOL @ warranty getting voided with a new mount. dumb ass mazda

  11. #41
    Registered User xsilent13x's Avatar

    Black 2010 Mazdaspeed3

    Join Date
    Mar 2010
    Location
    Fall River, MA
    Posts
    165
    Items for Sale
    I here it too. I got 400 mile on my car and its a pretty loud clunk. Let my buddy mechanic take a spin and he pretty much said the stock motor mounts are most likely making the noise. Since the motor mounts on these cars have a lot of play in them. I guess it's normal until you get aftermarket mounts. I still can't understand why they come out of the box with such loose mounts.
    ---Mark

    Black 2010 MazdaSpeed3

    -Resonator Delete, Ultimate-Racing Testpipe, CorkSport SRI & TIP, Turbosmart DP BOV, Autotech fuel pump internals, formerly Stage 1 93oct AP tuned.......currently beta testing Stage 2 93oct

  12. #42
    1.21 Jiggawatts Stavesacre21's Avatar

    2010 Mazdaspeed3

    Join Date
    Jun 2008
    Location
    Lima, OH
    Posts
    236
    Items for Sale
    After almost 8000 miles on my MS3, i've almost learned to tune it out. It still does it but it's becoming just as normal as the rev of the engine now. You don't notice it unless you're looking for it.

    All said and done, i've had numerous other things bother me significantly more then this. creaks/squeaks are starting to show their nasty face, and i've apparently got an isolated problem (to me) of cruise control issues. Thats and sub-sticker gas mileage have far overshadowed any of the shifter problems that originally drove me crazy.
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  13. #43
    Quote Originally Posted by Stavesacre21 View Post
    After almost 8000 miles on my MS3, i've almost learned to tune it out. It still does it but it's becoming just as normal as the rev of the engine now. You don't notice it unless you're looking for it.

    All said and done, i've had numerous other things bother me significantly more then this. creaks/squeaks are starting to show their nasty face, and i've apparently got an isolated problem (to me) of cruise control issues. Thats and sub-sticker gas mileage have far overshadowed any of the shifter problems that originally drove me crazy.

    I have 1500 on mine now and I really cannot hear any clunks or noises during shifting. Does it occur only under hard driving? also I am having 24mpg avg on the car which is not exactly bad for a car of this performance.
    Driver in training 2010 MS3 Liquid Silver Metallic

  14. #44
    1.21 Jiggawatts Stavesacre21's Avatar

    2010 Mazdaspeed3

    Join Date
    Jun 2008
    Location
    Lima, OH
    Posts
    236
    Items for Sale
    Actually, when pushed hard, you're not gonna notice it at all. It's usually the more leasurely and quiet driving that makes it obvious.

    As for the MPG, i'll admit that it's held its own in the town rating. I very rarely fall under about 20-21. However, the HWY is my huge gripe...on entire trips on the highway, i'll be lucky to get sticker to maybe 26. I know it's rated 25 but that's with the new rating system. If you were to cruise at 60 for a whole tank with the windows up and the A/C off in 70 degree weather, tipping 30MPG shouldn't be tough to do. Take the 1st gen MS3 for example...30MPG talk is far from unheard of.

    Oh believe you me...I owned a new RX-8, so I KNOW what bad gas mileage is. 230HP and 159lb-ft TQ with an amazing city rating of 14 city/20 hwy got old WAYYYY too fast. I love the MS3 for all that it is, i'm just mearly saying that it's got its flaws though, as does any car. I previously owned an MS6 as well and aside from the AWD, it's a complete hands down win for the Speed3.
    Sigs are visible only in your first post on a page. To change your thread display preferences, click here and enable 'Always Show Signature'.

  15. #45
    Registered User coyfish's Avatar


    Join Date
    Jul 2008
    Location
    Orlando, FL
    Posts
    2,614
    Items for Sale
    ^^^ Hands down win for the speed 3 . Not sure about that one !
    Black 07 Speed 6

    Mods: SU SRI, SU Inlet, SU test pipe, SU Motor Mount, Shifter Bushings, Forge bpv, TWM stage 2 SS, prosport dig boost gauge, aeroforce scan guage, CPE FMIC, Magnaflow Catback, Denso ITV-22's, COBB AP (RR tuned)

Page 3 of 6 FirstFirst 12345 ... LastLast

Similar Threads

  1. 2010 Mazdaspeed 3 vs. 2010 Hyundai Genesis Coupe 3.8
    By Kymerik in forum Automotive News
    Replies: 12
    Last Post: 09-22-2009, 06:22 PM
  2. edmunds: 2010 Mazdaspeed3 vs. 2010 Hyundai Genesis Coupe 3.8
    By Hank3 in forum Mazda3 Lounge & Welcome Area
    Replies: 4
    Last Post: 09-15-2009, 11:18 AM
  3. Does the 2010 hood fit a pre-2010 and should I care?
    By rednofive in forum Mazda3 Lounge & Welcome Area
    Replies: 6
    Last Post: 08-04-2009, 10:43 PM
  4. cold shifting 1-2, 2010 has thin trans oil
    By red6spd in forum MS3 Engine, Transmission & Drivetrain
    Replies: 16
    Last Post: 04-09-2009, 05:01 AM
  5. Sounds like a RC car...
    By YellowSpeed1229 in forum MSP Engine, Performance & Forced Induction
    Replies: 9
    Last Post: 11-21-2004, 02:24 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •