Search results

  1. K

    2012 Mazdaspeed 3 OEM parts for Sale!

    All these parts have less than 12,500 miles on them. It includes the Factory Recirc valve(BOV), Airbox(with filter), Airbox bracket, Cold pipe, intercooler hoses, Cold pipe hose to throttle body, part of the air intake that connects to air box, And recirc tube with one clamp. OEM intercooler...
  2. K

    GTSPEC Rear Subframe Reinforcement Panel for 2010+ Mazda 3 mazdaspeed 3

    Brand New GT Spec Rear Subframe brace Reinforcement Panel.. Purchased it 2 months ago but I decided to go with the Autoexe suspension brace kit front and rear under. I know I could still use this with it but I didn't want to add more weight and extra stiffening. So im selling it.. $180 FIRM...
  3. K

    2012 Mazdaspeed 3 OEM wheels

    SOLD!!! SOLD!!!. SOLD!!! Set of Stock Mazdaspeed 3 2012 wheels fs.. 2 of the wheels will come with TPMS sensors. 375 with the 2 tpms sensors.. 12,000 miles on them.. Includes lugnuts as well $375 for all 4 wheels only with 2 TPMS included -This is for all 4 wheels I only have 2 tpms because...
  4. K

    TP/RP question on fitment

    I'm looking at the greddy SE 70mm exhaust.. I was wondering if the 80mm/3inch TP/RP would fit it from corksport, UR, etc. Or do you have to get the RP/TP with the stock sized exhause outlet like the corksport with the 65mm?
  5. K

    Speed 3 soon :)... Some quesions.. exhauast/mods etc. Ordered some parts already

    Just sold my wrx.. And I guess I am moving to a new gen 2 speed 3.. Well not new but a 2012 or 2013 used.. Some of you may know me I had a Speed 6 awhile back.. Well I just sold my wrx and was looking at different cars and decided on a gen 2 speed 3. I have already ordered some parts this...
  6. K

    Oregon, Virginia and Massachusets have introduced bills banning sales of exhausts

    http://www.sema.org/sema-enews/2011/10/oregon-bill-to-ban-the-sale-of-aftermarket-exhaust-systems-to-be-considered-by-ho uh -oh Not goody http://echo.bluehornet.com/hostedemail/email.htm?h=d242c16522cecfa139d203df9b7c864e&CID=1992626247&ch=B23345480F8978F75C475934B4F6C908
  7. K

    Speed6 2006 FS: 43,900miles with mods!!

    SOLD! SOLD! SOLD! Im putting my 2006 Mazdaspeed 6 sport up for Sale! Asking Price: $16,850 no low ball offers.. Serious buyers only.. Mods go with car Location: Dallas, TX Mileage: 46,711 miles Original Color: White Water Pearl Trans: 6sp Manual Engine: 2.3MZR turbo Mods: Corksport...
  8. K

    SPEED 6 Photos

    My clean state
  9. K

    Ok im getting Tires and Wheels this week? Help me out Privat-Akzent maybe?

    Ok im looking at the TSW BRONZE Nurburging 18x7.5 ET 45 225/45/18.. weight around 17-18lbs each But Also at the Privat Akzent 18x8 46 offset but they are %$$%%$ Heavy its 26 plus lbs each. They look good to me but the weight is not WORTH the look. Or the 5-zigen ZR+520 Bronze So...
  10. K

    HR Vs Autoexe Springs HELP!!!!

    Ok Hr are progressive and the Autoexe are Linear. Im assuming the Autoexe are also stiffer. Does anybody know the spring rate of the HR spring? I know the HR will make the speed 6 a little lower than the Autoexe. But im wondering what do you guys think? Just got my refund I decided to go with...
  11. K

    Mazdaspeed 6 Engine Internals VS Mazdaspeed 3 Engine Internals?

    Ok the CPE site says the Mazdaspeed 3 engine can fail at over 300hp at the wheels. So Does the Mazdaspeed6 have the same internals and if so would it not possibly fail at a lower hp since its Awd?
  12. K

    Wish me Luck.. Car going into Dealership for Gear oil leak again

    Went to the dealer because I was smelling gear oil again. last time it was the Prop shaft seal. The dealer said could I leave it because its gonna take awhile to fix it. I told em I would drop it off later. As in wednesday of this week. Im guessing its leaking at the same place. Im also...
  13. K

    Transfer case leaking again!!!

    Theres oil on the left driveshaft at the boot and a small drip off the case. It is a very very very small leak but enough to where its starting to smell a little. This will be the third time I have had to go to the dealership to get this fixed. I am currently at 34,500 miles. And im pretty...
  14. K

    Ethanol to increase from 10% to 15%

    http://www.reuters.com/article/idUSTRE69C31120101014 Gas stations are worried about Liability because of possible damage to cars, Car manufacturers are worried and I doubt that this damage if it occurred would be under any warranty. Would the Government foot the bill if your vehicle, Lawn...
  15. K

    MS6 sport weight VS MS6 Touring

    Whats the difference in Weight.. I have the sport with no sunroof and cloth seats. No power seats or anything like that. So is the sport lighter than the touring model
  16. K

    Bluebook Value of My Car?

    Suggested Retail $19,235 dollars? I double checked And this is what it stated I have a 2006 Mazdaspeed 6 sport and it has 30,0200 miles on it.. Guess I got lucky since I got mine for 14,900 and had only 19,000 miles on it. I need to stop driving it so much I have only had it since january 1st...
  17. K

    Enkei RPF1s 18x8.5 or 18x9?

    If I purchased these wheels would I need the 30 offset or the 40offset? Also They have a 18x9 with a 35 offset will that not fit the car? I am just wondering because they are pretty light around 18 lbs the only thing Is I really wanted bronze wheels but I dont see any I like. And these are...
  18. K

    7 Weeks and still waiting on ETS topmount

    As of Tommorrow the 28th It will be 7 weeks of me waitin on my ETS top mount from Backorder. :) I hope its worth it.. Whats the average wait time you guys know
  19. K

    Anybody looking for a MS6 I found one its a 2007 and its CHEAP

    http://www.autotrader.com/fyc/vdp.jsp?ct=u&car_id=279356343&dealer_id=100018390&car_year=2007&rdm=1277448489791&lastStartYear=1981&model=MAZDASPD6&num_records=25&systime=&make2=&highlightFirstMakeModel=&start_year=2002&keywordsfyc=&keywordsrep=&engine=&certified=&body_code=0&fuel=&awsp=false&sear...
  20. K

    Got my AUTOEXE carbon fiber Rear splitters - Need some help

    One problem one of them is not curved enough the left one. I dont see how I Can put it on without making the bumper push out and the rear exhaust black piece to push down. It sucks You put both pieces side by side and you can tell one of them is not curved enough in the center where it mounts...
Back