Search results

  1. Z

    Spark Plugs

    Had some Denso ITV22 (one step colder) took them out and put in the NGK LTR7IX-11
  2. Z

    Accessport on a stock Speed3

    You will see some small gains, I would suggest the following: Intake Change - let it breathe, many options here Fuel pump internals change out - keep the pressure up, a few options Then the AP Then move into fixing the exhaust, fixing the IC and alot other items. Enjoy the journey Z
  3. Z

    matching spray paint color.

    I have used automotive touchup with success. http://www.automotivetouchup.com/index.htm Z
  4. Z

    Mazdas247 Mazda of the Month | May

    Figured the brunette would put you over the top
  5. Z

    GEN2 Corksport SRI/TIP with two sets of silicone

    Mods please close items sold
  6. Z

    GEN2 Corksport SRI/TIP with two sets of silicone

    Have gone BT so this had to be replaced. I have had this from the beginning and recently had changed the blue silicone out for the black. There are wear marks on the large metal piece due to rubbing against the ECU plastic. Asking $200 and will include both sets of silicone couplers, air...
  7. Z

    whats AP vs standback2 ?

    That would be a mistake
  8. Z

    Mazda of the Month - VOTE NOW for May!

    Joka got mine. The custom mods in the engine bay (battery box) tilted me in that direction but the brunette hood prop with Strick's engine bay almost swayed to the GENDONE. Both cars are very clean
  9. Z

    Radar Detector Hard Wiring

    Don't have a CX5, for my MS3 Escort I used a blendmount and went straight into the autodim mirror with a invisicord. http://www.blendmount.com/ http://www.invisicord.com/install.html You could also think about tapping into the dome light, there should be a switched hot in that area. Z
  10. Z

    Big turbo Genpu Speed 3

    I would suggest another forum if you are not all ready there. Not alot of pure tech/power discussions here.
  11. Z

    Big turbo Genpu Speed 3

    Close to what I have, went with the 38mm Tail off the housing and blocked the WG connection on the manifold. Have not bothered with the in tank pump yet. Tial BPV is on order as my HKS is just not making it (flutter). Working with PermTuning, on revision 2 with 21 to RL and is holding very...
  12. Z

    backfiring on speed 3

    Could be an issue with the BPV (adjust the spring pressure if possible), could be a fueling issue (LTFT/STFT), typically the cars run rich, and backfire on shift is unfortunately normal. It would help to know all your mods.
  13. Z

    GT3071r only 500 miles on it.

    just put in a GTX3076, have you posted over at msf.
  14. Z

    Adjustable Wastegate

    The issue is the DP, you actually probably need two items, upgraded fuel pump and a tune (AP). There are a few internal kits, Autotech, KMD, PTP, probably go with the Autotech thru Edge but whatever you chose, just do this. Also CPE makes a full replacement but it is costly and you have to...
  15. Z

    LTFT's and STFT's?!?!?!?!?

    Temperature variations will cause issues with FT. Is it possible that you got something on the MAF sensor when you installed the SRI. Also, check the electrical connection, something is wacked. Are you sure you are getting the proper numbers?
  16. Z

    Question on Bov and SRI ????????????

    I would suggest recir with or without a tune, agree that the fuel pump needs to be adressed as well as utilizing the AP/ATR Check all your connections on the intake of leaks.
  17. Z

    Question for those with more experience then me

    OP, there are no issues with what you have, I had a CS SRI/TIP and UR catback on for a long time before I did anything else. As Somno points out, get the RMM on quickly as possible. Then I would do the following: AP (phone program does not cut it moving forward) Fuel Pump replace or internals...
  18. Z

    LTFT's and STFT's?!?!?!?!?

    I saw this post on MSF, I believe they gave you some answers (get Abilors guide, get an AP, install ATR, read ATR help file). Don't worry about the short terms for now, the issue is to get the long terms down below 4 and below 2 if you can. First install the proper map based on your mods...
  19. Z

    Mazdaspeed3/6 Short-Shift Plate + Shifter Weight

    80 bucks new, I would go new
  20. Z

    which is the Best CAI for MS3

    I am sure this is a dead issue, but there are some other things to consider: Would you ever go with a FMIC Would you ever go with Meth Injection That area is idle for mounting an OCC There is some data, forget where that looked at the intake differential and it was minimal. Z
Back