Recent content by MikeES2.0

Things I have tried, I have the has nozzle almost all the way out of the filler tube. I even bypassed the canisters at the back of the car, I hooked the vent hose direct from the filler neck vent to the gas tank vent and the problem is still there. I'm wondering if its the valve in the filler...

Like the title says. It's very hard for me to pump gas into my 03.5 MSP. I can only pump a few cents at a time, anyone have any ideas. It's almost like maybe the venting or something. PLEASE HELP :-)

Hi everyone, I have a question regarding the rotors and pad for a 03.5 MSP Are they the same as on say a P5 I've been trying twice to get pads for the drilled rotors (on the car when I bought it) that are on my MSP but the pads seem smaller then the ones that are on the car now. I'm hoping I'm...

I don't know for sure, it has to come off because there's a broken bolt in the manifold. I'll check the piping when I take the assemble off. I'll also check it for cracks at the same time.

Well the car is blowing blue smoke on cold start ups. I'm going to remove the turbo and just throw a header on the car until I get another replacement turbo. I'm guessing the MSP computer will have to be changed with a non turbo protege right (I have an 2001 protege 2.0 winter beater) will I...

Hi all, just wondering if the whole 1.8 liter coil mod is worth it. I was at a wreaking yard a week ago and seen a 1.8 still with all of the coils and brackets. If its a good mod what all would I need to get from the scrap yard car, besides the coils, mounting brackets. Any info would be...

Hey what's the thermostat housing and coolant pipes look like. I would be interested in it. Please let me know. Mike

My radio needs the ribbon cable replaced.

Just wondering if there my be any interest in the kenwood stock head unit from my msp.

Looking for Split Second Fuel and Timing Controller, let me know if you or someone else has one. I hope this in the right area.

I was playing around with my newly completed Cnc router I built and thought I would make a MSP key chain. What do you guys think. I still need to cut it out, all I did was do the engraving.

The exhaust manifold needs to come off because it's leaking up at the head and I believe it's cracked.

How much for the hard piping shipped to Ontario Canada

Ya so true, the other problem with the roads salts is the small bolts that hold the top securing plate on the tank are nice and rusty, I'll be lucky to be Balt to get them out. Anyone have any ideas regarding the exhaust manifold removal and it's rusty bolts. Mike