Recent content by Atkins Dan

I dont know.. I have had really good body shop guys around me and they just did that kind of fixing for me.. Dan

dont use RTV.. it is acidic and will eat the body.. it will take a few years to do this but I have been there and it is not fun having a body shop fix it.. Dan

nice ride.. Look on Ebay as there are a few here in the USA that can rebuild the cluster.. I have not used any yet but thought I would share on what I found for the burnt clusters. as for the e-shaft goes I use a block of wood and a dead blow hammer to tap the 2 pieces of the shaft apart.. I...

ok was not sure on this one as most Mazda's that I see can go either way.. But thank you for the info.. Dan

looks like a really nice ride.. Dan

your best bet is to wash the engine bay from top to bottom and watch where this oil is coming from.. Dan

I have used KYB for years and have been really happy.. Dan

you're welcome.. Dan

the only other carb you can use off the shelf is a weber.. all others wont work right as the rotary engine breathes differently and has a slight pulse going through the intake.. So sorry in our case a Edelbrock or Holey right off the shelf wont run correctly.. Dan

you need to get the carb from Racing beat.. they are the only ones that have been able to make a Holley to work correctly on a rotary.. I will look at my KYB Book on the notes my dad has put for the shocks and struts.. Dan

I had a car like this once.. look on the floor under the carpets as there should be a few rubber plugs.. in my case 2 of them were missing.. If yours has a sun roof make sure the drains are clear and draining outside the car.. Dan

what year is your Rx4 and it is a coupe or wagon??? Dan

that is what I thought but was not sure.. Dan

Congrats.. I will be watching as well.. Dan

Looks like a lot of fun.. My 82 Rx has been in the family since day 1.. it now has a early 4-port 13B with boost (Supercharger)..they are a lot of fun.. if you need any questions answered dont be shy to ask.. Dan