Need help with Injen CAI Install!

[Jarpo]

I need help installing my Injen CAI. I ordered it used off ebay so I received no instructions and Ghost's how to page is now gone. I got the air box off and put the pipe that the filter goes on. I'm needing help with the other pipe, like placement and what attatches to it. Any help would be greatly appreciated. Thanks

[dirtysouth_msp]

The small side attaches to the turbo. The large side attaches to the MAF. Be sure that the MAF wiring connector is facing the firewall. The J-shaped tube coming off of the main tube attaches to you stock bypass valve and is used for recirculation. The other nipple attaches to the large vacuum line that connects just under the right side of the engine cover. And for the tube that attaches to the filter; the hole in the side is for the air temp sensor. Reuse the stock grommet and insert the sensor. Don't completely tighten everything until it is all fitted together.

I don't have my instructions anymore, but I hope this helps.

[Jarpo]

Looks like I got it all on. The problem was whoever sold this to me cut the j-shaped tube off towards the start of it, therefore the bypass valve didn't go to it so I had to guy and buy some extra hosing. looks like he did the same to the other "nipple" too cause it, also, wasn't long enough. Thank you for your reply and I hope I got it all right now.