Parting out my MSP and cleaning out shed!

[blindfury37]

*UPDATE 2/1/05 Reduced some prices*

*UPDATE 1/24/05* I've removed the pic's of the sold items

Well its been a fun 2 years but with a wedding on the horizon its time to move on. Some parts below are used, some are new so read the descriptions. All prices below include standard shipping within the lower 48 states!

Please Paypal only to: mike@mysandford.com

All items will be shipped from NJ. Smaller items will go USPS larger items via UPS.

Used 52mm Autometer Ultralite Mech. Boost/Vac Gauge 30"/30psi - $35 *SOLD Leonardo* PAID SHIPPED USPS 1/19/05 1:34PM
Used 52mm Autometer Ultralite Air/Fuel Gauge - $35 *SOLD Qidan* PAID SHIPPED USPS 1/25/05 4:22PM
Used 52mm Autometer Ultralite Mech. Oil Pressure Gauge - $35 *SOLD Qidan* PAID SHIPPED USPS 1/25/05 4:22PM
*NOTE- Oil pressure sensor never installed*

Single DIN Gauge Panels - $10 each

http://www.msprotege.com/members/blindfury37/gauge_panels.JPG

Used Holds 1 52mm gauge / 2 Greddy components *SOLD Woody1969* PAID SHIPPED USPS 2/3/05 12:17PM
New/Unfinished Holds 2 52mm gauges *SOLD gboromsp* PAID SHIPPED USPS 1/19/05 1:34PM
New/Unfinished Holds 1 52mm gauge / 1 Greddy component
New/Unfinished Holds 3 52mm gauges

Used APC Euro Tails - Excellent condition! $100

http://www.msprotege.com/members/blindfury37/taillight.JPG http://www.msprotege.com/members/blindfury37/taillight1.JPG

Used DG Carbon Fiber Grill with Mesh - $125 *SOLD FunkyBuddha* PAID SHIPPED USPS 1/24/05 3:46PM
*NOTE - has 1 small rock chip and mesh is loose*

NEW - AWR Manual Trans Rear Motor Mount - $30

http://www.msprotege.com/members/blindfury37/motormount.JPG

NEW - Corksport Stainless Steel Braided Brake Line Kit - $75 *SOLD FunkyBuddha* PAID SHIPPED USPS 1/24/05 3:46PM
*NOTE - Black/tinted finish*
NEW - Corksport Stainless Steel Braided Clutch Line Kit - $15
*NOTE - Clear finish* *SOLD MP3racer* PAID SHIPPED USPS 1/24/05 3:46PM
Used Greddy Profec B-spec II Electronic Boost Controller - $250 *SOLD Rawyzf* PAID SHIPPED USPS 1/24/05 3:46PM
*BONUS - Includes Greddy Full Auto Timer! Both in silver finish. Both come complete ready to install except for maybe a couple feet of silicone hose. The boost controller works great but I cannot say the same for the turbo timer. I don't know why but it would cause problems with the alarm every once in a while.*

NEW - Corksport 'Power Series' Exhaust System with Silencer - $350 *SOLD* PAID
*NOTE - I actually never even opened up the box since they shipped it to me several months ago!*

Used - HiBoost FMIC Kit with Injen Intake $750
*NOTE - This is still installed and this price is firm! Anything less is not worth me taking out of my car! There are 3 small dents in the front of the intercooler. I pulled into a driveway and my bumper got pushed into the intercooler.*

(2) NEW - Omega DS-2 Power Door Lock Acutators - $5 *(2) SOLD* PAID SHIPPED

(3) NEW - Power Trunk Release Kits - $10 *(2) sold pheonix* PAID SHIPPED USPS 1/19/05 1:34PM
*(1) SOLD AODfan* PAID SHIPPED USPS 2/3/05 12:17PM

FREE! Just over 8' of Stinger 4 gauge silver High Current Power Cable
*NOTE - Left over from my ground wire mod. Buyer pays shipping charges!*

http://www.msprotege.com/members/blindfury37/cable.JPG

*** NEW ITEMS ADDED 1/18/05 ***

FREE! Stock Mazdaspeed Springs with about 15,000 miles on them. *SOLD Qidan* PAID SHIPPED USPS 1/25/05 4:22PM
*NOTE - Buyers pays shipping charges!*

[MP3racer]

Well its been a fun 2 years but with a wedding on the horizon its time to move on. Some parts below are used, some are new so read the descriptions. All prices below include standard shipping within the lower 48 states!

Please Paypal only to: mike@mysandford.com

All items will be shipped from NJ. Smaller items will go USPS larger items via UPS.

Used Autometer Ultralite Boost/Vac Gauge 30"/30psi - $35
Used Autometer Ultralite Air/Fuel Gauge - $35
Used Autometer Ultralite Oil Pressure Gauge - $35

02MSP Single DIN Gauge Panels - $10 each
Used Holds 1 52mm gauge / 2 Greddy components
New/Unfinished Holds 1 52mm gauge / 1 Greddy component
New/Unfinished Holds 2 52mm gauges
New/Unfinished Holds 3 52mm gauges

Used APC Euro Tails - Excellent condition! $120

Used DG Carbon Fiber Grill with Mesh - $125
*NOTE - has 1 small rock chip and mesh is loose*

NEW - AWR Manual Trans Rear Motor Mount - $50

NEW - Corksport Stainless Steel Braided Brake Line Kit - $75
*NOTE - Black/tinted finish*

NEW - Corksport Stainless Steel Braided Clutch Line Kit - $15
*NOTE - Clear finish*

Used Greddy Profec B-spec II Electronic Boost Controller - $250
*BONUS - Includes Greddy Full Auto Timer! Both in silver finish. Both come complete ready to install except for maybe a couple feet of silicone hose. The boost controller works great but I cannot say the same for the turbo timer. I don't know why but it would cause problems with the alarm every once in a while.*

NEW - Corksport 'Power Series' Exhaust System with Silencer - $350
*NOTE - I actually never even opened up the box since they shipped it to me several months ago!*

Used - HiBoost FMIC Kit with Injen Intake $750
*NOTE - This is still installed and this price is firm! Anything less is not worth me taking out of my car! There are 3 small dents in the front of the intercooler. I pulled into a driveway and my bumper got pushed into the intercooler.*

(2) NEW - Omega DS-2 Power Door Lock Acutators - $5

(3) NEW - Power Trunk Release Kits - $10

FREE! Just over 8' of Stinger 4 gauge silver High Current Power Cable
*NOTE - Left over from my ground wire mod. Buyer pays shipping charges!*


I'll take the Corksport SS clutch line kit if it is still available.

BTW, what diameter is the Autometer oil pressure gauge? Is the gauge mechanical or electric?

Thanks,
Tom

[Scooter_TO]

you sir have a PM

[xFLiPsTyLeZx]

PMed!

[spacemonkey]

Congrats on the wedding. I would snatch up the break lines but im low on cash as of now.

[Leonardo]

I'll take the boost guage if its still available!!

[mountjonas]

do you have pics of the DIN gaugek holders?

[alprotege]

will that grill fit in an 99-00 model?

[SpicyMchaggis]

Got anything else to sell?

[Drmdriver03]

Dibs on grill after pics!

[Witchdoktor]

will that grill fit in an 99-00 model?

nope (doh)

[blindfury37]

*Spacemonkey* Thanks!

Attached is a picture showing the gauge panels.

http://www.mysandford.com/images/gauge_panels.JPG

[HONDA_KILLER]

*Spacemonkey* Thanks!

Attached is a picture showing the gauge panels.

http://www.mysandford.com/images/gauge_panels.JPG

ill take the dual din gauge holder how much iz it

[blindfury37]

Sorry, the dual 52mm gauge panel has been paid for already and they are all $10 each.



ill take the dual din gauge holder how much iz it

[justanotheradikt]

exhaust and springs still for sale?

[KzA]

can i see some pics of the damage to the grill?

[hazeXban]

The price for the used tails seems pretty high since you can get them new for less. I would be very interested in them thats why I say this. I could also do a pick up to save on shippin.

[Qidan]

PM Sent!

I'd like to get those springs!!!

Thx!

[blindfury37]

These were the first addition to my car just over a year ago and they are awesome tails. I paid more than this when they came out. Show me where you can get them new for less and I'll adjust my price accordingly. I'm fair and these are in great shape. I'm going to be posting pics of everything else in a bit and you can see.


The price for the used tails seems pretty high since you can get them new for less. I would be very interested in them thats why I say this. I could also do a pick up to save on shippin.

[Style "N" Speed]

grill or taillight still for sale ?????

[hazeXban]

http://www.procarparts.com/store-detail.asp?sku=MZ99PG%2D10415ATX

Not trying to be a dick, just trying to get a fair deal.

[FunkyBuddha]

Whats' sold..and what's not? Grill still for sale??

If not..dibs on the brake lines!! still for sale?? I got the money right now

[BlkWidow]

what is left?

[kicker22705]

how much for the boost controller w/o the timer.

[hazeXban]

Just in case no one clicked the link, they selling those tails for 110.00

[blindfury37]

Everything that is listed in my original post that is not marked *SOLD* is still available. However,
the grill, tails, brake lines, greddy are pending.

I am trying to be fair and handling the requests on a first "PM or email" basis. If you wish to be added to the list for the above items please PM or email me. PM is prefered through!
As of right now I have 2 people deciding on the grill, one on the tails, 2 on the brake lines, and 1 on the greddy.
Thanks!

[blindfury37]

Same. Its free with the boost controller as I can't guarentee it working 100% so if you can get it to work for you great otherwise you can chuck it!



how much for the boost controller w/o the timer.

[blindfury37]

I checked into this especially since this is where I bought them from a long time ago! They are $109.95 PLUS shipping and they are located in california and shipping standard ground 14 miles away withing Los Angeles county is $25.45

So in reality you cheapest cost is $135.40
These are in excellent condition and I'm selling for $120 shipped anywhere within the lower 48 states. Since you are in NJ, if you want to pick up we can make a deal. Just PM me.




Just in case no one clicked the link, they selling those tails for 110.00

[blindfury37]

*bump*

[Pheonix]

do you think those tails will work well with LEDS, with the red lens over them and all.
maybe i could bake them and try and remove it.

[blindfury37]

I honestly have no idea. I know the LED bulbs will not fit through the back of the lights. I'd love to keep them but my fiance said all the car parts have to go to pay for the wedding. My poor car! :'(

do you think those tails will work well with LEDS, with the red lens over them and all.
maybe i could bake them and try and remove it.

[rtong1]

Show me a picture of the HiBoost FMIC Kit with Injen Intake.
Will it come with all hard pipes?

[blindfury37]

Once I get the car dug out of all this friggin snow we got up here I will post pictures of the intake and FMIC. This will ship as a complete kit as you have to trim the small pipe that comes off of the injen to attach the hose to the hks valve. I really don't want to part with it as it was a PITA to install plus the gains were awesome.

Show me a picture of the HiBoost FMIC Kit with Injen Intake.
Will it come with all hard pipes?

[rtong1]

ok hope to see it soon

[99toppro4u]

is the engine gone already?...

[blindfury37]

*BUMP* Updated list

[blindfury37]

*BUMP* Reminder, ALL prices INCLUDE free shipping to the lower 48 states.

[AppProtegeSpeed]

What do you have left?

[blindfury37]

Everything in the original post that is not marked sold.
taillights, awr motor mount, power cable, fmic, exhaust...

[gar777]

Do you have any other MSP parts not listed? I am looking to upgrade my ES to MSP front brakes and so I need the front calipers and rotors (I'd take the pads, too, to check fitment). Let me know if you have them. Thanks.

[justanotheradikt]

do you have your stock exhaust for sale?

[blindfury37]

Only what is listed.
Thanks