Problem with Greddy TT

[MetalSpeed]

"I did a search already" A week ago I noticed that when I turn my ignition to off the car starts to die then back to on, I thought it was a bad ground so I tore my car apart to check the ground on the e-brake to see if it was loose and nope. I checked all the wires and they were all connected fine, do yall know of any problems similar to this? Or do you think you know what it is??

[jurgs01]

How did you splice all of your connections (solder?). Also, check that your e-brake signal is working properly (brake light comes on when e-brake is on).

[MetalSpeed]

I didn't do the install but they used 1 barrel connector and 1 piggy back connector I believe the light for the brake was on.

[jurgs01]

I don't know how much you know about electronics, but opening one wire and wrapping the other through the middle then soldering it is a very solid connection. With connectors you always have to worry about good continuity since things can slip out of place. My best educated guess would be to check and possibly redo the connectors (get a repair kit at radio shack with all the connection will come in handy now and later). I really can't tell you much else without checking it myself.

[MetalSpeed]

cool I was trying to avoid doing the connections again,I was just being lazy but I will do it, I will let you know the out come.

[react.is.a.geek]

"I did a search already" A week ago I noticed that when I turn my ignition to off the car starts to die then back to on, I thought it was a bad ground so I tore my car apart to check the ground on the e-brake to see if it was loose and nope. I checked all the wires and they were all connected fine, do yall know of any problems similar to this? Or do you think you know what it is??
I have the same TT and i'm experiencing the same issue. I installed mine with some wire taps...(shrug)

[benflagg]

you got the wires backwards on the ignition curciut blue goes to blk and white and green goes to blue