Dimitrios
12-09-2004, 11:36 PM
See this link for details:http://intenseperformance.com/products/cone_filters/cone_filters.html (scroll down to the "big mouth filters)
7" stack height, 5 1/4" top that opens to a 5 1/2" opening (the filter area is actually about 6 1/2") that narrows to a 2 3/4" ID (inside diameter) opening by way of the aluminum base
I had replaced my AEM SRI intake filter with this, but took some modifications and I ended up with a less than optimal tube length (too short).
However the shear surface area of the filter allows for quite a small pressure differential and I had some pretty insane throttle response.
I used it for maybe 600 miles, no holes, and a small impression on one of the pleats that in no way is through or hinders performance. If I had the motiviation to find a reasonable way to mount this and keep in place, I would. May not be necessarily the best sized filter for the Protege engine bay (I had initially bought if for my Nissan way back when, but never installed it - had it sitting around for about 1 1/2 years in it's back and never dried out before I decided to do something with it).
Includes the filter, the base, two clamps and a silicone coupler.
Asking $25 + shipping (figure $7 shipping in the lower 48 via slow boat from Chicago)
Pm or email me
7" stack height, 5 1/4" top that opens to a 5 1/2" opening (the filter area is actually about 6 1/2") that narrows to a 2 3/4" ID (inside diameter) opening by way of the aluminum base
I had replaced my AEM SRI intake filter with this, but took some modifications and I ended up with a less than optimal tube length (too short).
However the shear surface area of the filter allows for quite a small pressure differential and I had some pretty insane throttle response.
I used it for maybe 600 miles, no holes, and a small impression on one of the pleats that in no way is through or hinders performance. If I had the motiviation to find a reasonable way to mount this and keep in place, I would. May not be necessarily the best sized filter for the Protege engine bay (I had initially bought if for my Nissan way back when, but never installed it - had it sitting around for about 1 1/2 years in it's back and never dried out before I decided to do something with it).
Includes the filter, the base, two clamps and a silicone coupler.
Asking $25 + shipping (figure $7 shipping in the lower 48 via slow boat from Chicago)
Pm or email me