OBX header [Archive] - Mazdas247.com

steve_protege

12-04-2004, 06:25 PM

Where can I find the 4-1 OBX header for the 1.6 liter 99-00 Protege sedan since Protegegarage.com closed down? Ive searched around on the web, but can't seem to find anything. Someone help me out?

*Edit* GB currently delayed till early August. Stay tuned!

NRRfrogmanP5

12-04-2004, 06:31 PM

http://www.obxracingsports.com/performance.cfm?catID=3&subcatID=22

only thing i could find....maybe u can order through them somehow...

steve_protege

12-04-2004, 06:34 PM

http://www.obxracingsports.com/performance.cfm?catID=3&subcatID=22

only thing i could find....maybe u can order through them somehow...

Haha, funny. Thats the same web site I JUST visited right after I made this thread. I figured they had the headers there, but was just wondering if anyone else might offer them. Im trying to get the header a little cheaper than 300.00 + shipping. I suppose if I can't find it anywhere else, I'll end up buying through OBX racing then. Thanks for the help.

sethsrx3

12-04-2004, 06:45 PM

Chris at SPD has them.

nadim

12-06-2004, 10:37 AM

Where can I find the 4-1 OBX header for the 1.6 liter 99-00 Protege sedan since Protegegarage.com closed down? Ive searched around on the web, but can't seem to find anything. Someone help me out?hey isn't there any other site for the header for the 1.6L year 2002 protege ??u didn't find other!!

steve_protege

12-06-2004, 11:38 AM

Chris at SPD has them.

Whats his member name so I can message him?

pdhaudio83

12-06-2004, 11:41 AM

FC3S Boy

i believe

steve_protege

12-06-2004, 11:54 AM

Thanks much guys!!

nonameheroes

12-06-2004, 06:58 PM

you can call him too. phone number is on the website. www.spdracing.com (http://www.spdracing.com)

FC3s Boy

12-06-2004, 09:13 PM

yea obx is going to let me know when them get them back in stock

TampaSport20

12-10-2004, 05:31 PM

never. they never actually made them

Sky_high

12-14-2004, 11:15 PM

never. they never actually made them
So if I understand correctly, you're saying that the OBX header for the 1.6L (part number H2016) does not exist?

FC3s Boy

12-15-2004, 01:53 PM

nadim

12-15-2004, 02:03 PM

if a few of the 1.6l guys start calling maybe they see a demand for them her eis the phone #

OBX USA Importer/Warehouse Distributor:

(Main Head Quarter)

OBX Racing Sports USA

Tel: (650) 873-8800

Fax: (650) 873-8802

they told me that they are working on that,and to call in three weeks to see what have they done.

zmanpro63

12-15-2004, 02:13 PM

they told me that they are working on that,and to call in three weeks to see what have they done.

I have the AWR header for my 99 ES here is the page from Mitch at Protege5online http://www.protege5online.com/For_Sale_Page/AWR_Header/awr_header.html
Hes pretty good at finding out info for you, but I dont know if this header works for the 1.6

Shane5425

12-15-2004, 02:28 PM

never. they never actually made them
protegegarage.com sold a few so they did make them..

steve_protege

12-17-2004, 09:40 PM

I HAVE AN UPDATE!!! The people from Tuning Depot (who are OBX distributors) got back with me about the 1.6 liter OBX header for the 99-00 Protege sedan. Here is what they said:

"Oh yea. If interested Send paypal payment's to PayPal@TuningDepot.com . it
will be the fastest and easiest way to have a smooth transaction for both of
us. $299.00 + shipping & CA tax (if in CA).
----- Original Message -----
From: "Steve Suggs" <wdstud@yahoo.com>
To: "tuningdepot" <sales@tuningdepot.com>
Sent: Friday, December 17, 2004 4:48 PM
Subject: Re: 99-00 1.6 liter Protege sedan header

> Thats a great deal. How long is this introductory
> price going to last? I can pass this along to my
> family and friends as a potential "I want" X-mas
> present. How would I go about ordering?
>
> --- tuningdepot <sales@tuningdepot.com> wrote:
>
> > Hello,
> >
> > I have just talked to OBX and they said they have
> > that header currently in
> > stock. MSRP price is USD$599.00 but i can give it to
> > you for a special
> > introductory price of USD$299.00. Please let me know
> > if your interested.
> > Thanks

nadim

12-18-2004, 03:08 AM

I HAVE AN UPDATE!!! The people from Tuning Depot (who are OBX distributors) got back with me about the 1.6 liter OBX header for the 99-00 Protege sedan. Here is what they said:

"Oh yea. If interested Send paypal payment's to PayPal@TuningDepot.com . it
will be the fastest and easiest way to have a smooth transaction for both of
us. $299.00 + shipping & CA tax (if in CA).
----- Original Message -----
From: "Steve Suggs" <WDSTUD@YAHOO.COM>
To: "tuningdepot" <SALES@TUNINGDEPOT.COM>
Sent: Friday, December 17, 2004 4:48 PM
Subject: Re: 99-00 1.6 liter Protege sedan header

> Thats a great deal. How long is this introductory
> price going to last? I can pass this along to my
> family and friends as a potential "I want" X-mas
> present. How would I go about ordering?
>
> --- tuningdepot <SALES@TUNINGDEPOT.COM>wrote:
>
> > Hello,
> >
> > I have just talked to OBX and they said they have
> > that header currently in
> > stock. MSRP price is USD$599.00 but i can give it to
> > you for a special
> > introductory price of USD$299.00. Please let me know
> > if your interested.
> > Thanks

hey but they do have them know cause yesterday he wrote me saying this estimated time of arrival to OBX main headquarters would be 1-2 months. check back then. well be one of the first people to have them in stock

FC3s Boy

12-18-2004, 01:55 PM

I HAVE AN UPDATE!!! The people from Tuning Depot (who are OBX distributors) got back with me about the 1.6 liter OBX header for the 99-00 Protege sedan. Here is what they said:

"Oh yea. If interested Send paypal payment's to PayPal@TuningDepot.com . it
will be the fastest and easiest way to have a smooth transaction for both of
us. $299.00 + shipping & CA tax (if in CA).
----- Original Message -----
From: "Steve Suggs" <WDSTUD@YAHOO.COM>
To: "tuningdepot" <SALES@TUNINGDEPOT.COM>
Sent: Friday, December 17, 2004 4:48 PM
Subject: Re: 99-00 1.6 liter Protege sedan header

> Thats a great deal. How long is this introductory
> price going to last? I can pass this along to my
> family and friends as a potential "I want" X-mas
> present. How would I go about ordering?
>
> --- tuningdepot <SALES@TUNINGDEPOT.COM>wrote:
>
> > Hello,
> >
> > I have just talked to OBX and they said they have
> > that header currently in
> > stock. MSRP price is USD$599.00 but i can give it to
> > you for a special
> > introductory price of USD$299.00. Please let me know
> > if your interested.
> > Thanks

when they come out i wil be selling them for $240 shipped

steve_protege

12-18-2004, 06:31 PM

when they come out i wil be selling them for $240 shipped

Thats an awesome deal!! The Tuning Depot guy wants 299.00 + shipping. How would I go about ordering? Can I pre-order one? How long do you think it will be before you get them? This guy claims to have them in stock. Maybe I can get him to lower the price a bit. Do some negotiating????

FC3s Boy

12-20-2004, 02:23 PM

Thats an awesome deal!! The Tuning Depot guy wants 299.00 + shipping. How would I go about ordering? Can I pre-order one? How long do you think it will be before you get them? This guy claims to have them in stock. Maybe I can get him to lower the price a bit. Do some negotiating????
the guys at OBX say they do not have any in stock and he did'nt know when they would come out ( i have yet tosee one made form them for the 1.6l)

nadim

12-20-2004, 02:31 PM

the guys at OBX say they do not have any in stock and he did'nt know when they would come out ( i have yet tosee one made form them for the 1.6l)
yeah that's right that was i also heard and that they will be back in stock in three weeks

Sky_high

12-25-2004, 09:08 PM

Awesome,

However, do you think there would be a real performance gain for our 1.6L?

protito

12-25-2004, 09:35 PM

I am not sure they make headers for a 1.6

Captain KRM P5

12-25-2004, 10:06 PM

i did sell a few when we were open

TampaSport20

12-28-2004, 05:23 PM

(blah) I'd love to see a receipt for a 1.6L header you sold and a comparison of part #'s with the 1.8L header.....

Captain KRM P5

12-28-2004, 10:03 PM

(blah) I'd love to see a receipt for a 1.6L header you sold and a comparison of part #'s with the 1.8L header.....
blah blah? the box and invoice were labelled 2016, not 2020. I opened the box prior to shipment and the header was indeed different than the 2020. not to toot my own trumpet here but I've been on these forums long enough and contributed enough for most people to know I wouldn't bullshit them - especially about something that really doesn't affect me.

there is no specific 1.8 liter header - the 2.0 header fits that engine as they are physically identical in those regards.

TampaSport20

12-29-2004, 05:54 PM

Well I've been a member of this community since the days of protegetech, and I've been on ALL the boards since they started...I have NEVER seen a member with a header for a 1.6L ZM-DE, and every contact I had with obx was that the header was in development,never that it was done....If one can be produced I would be happy to anty up the money and buy one, but I'm not putting it up and then told "it's on back order" or some other bs.....not doubting your honesty here man, but I have yet to see one.

Captain KRM P5

12-29-2004, 10:24 PM

mazpro

12-30-2004, 01:17 AM

TampaSport20

12-30-2004, 02:30 PM

buy it then, and let me know if it's the right part !! (cool) I'm tired of getting jerked around by companies who claim to have it in stock,but can never produce one

nadim

01-08-2005, 10:10 AM

I don't know if anyone seen this, but this guys claim to have them in stainless steel for $175 and ceramic for $150. I am trying to save-up some money for these.

http://streetstyler.com/OBXHEADERS.htm

if you scroll down in either one, it says: MAZDA PROTEGE 01- 1.6L DOHC
well they don't have them also i tried to buy the header from them but they told me they don;t have it too they waiting to have them(crazy)

protege02

01-13-2005, 11:13 PM

im thinking about getting this header, but i dont know if its worth the money. to all owners and ex owners of the obx header, do/did you llike your header? is there a noticable difference in power or its the same feeling as adding an intake and exhaust? also, is the gains worth the $200 for the header? i have a mazdaspeed axel back and (soon to be installed)k and n typhoon intake. do you all think i should go for it or leave my car the way it is? thanks for all the info guys and gals

HI-RES

01-14-2005, 09:38 AM

I dont personally have one (waiting for this damned 1.6 to become available) but owners opinions indicate its probably the best bang for buck hp mod out there. The stock exhaust manifold is quite restrictive. I'd take a stab & say you'd probably get as much hp increase as from the intake & axelback combined.

ahb11m

01-29-2005, 10:07 AM

hmmm well i have been forced into a problem here... so i'll let you know about it - my header cracked across the 1st flange, nearly lost the whole exhaust!!! good way to leave a cruise early for a beer at home (naughty)

http://www.msprotege.com/members/ahb11m/DSCF0365.JPG

this crack has now opened up to height of 9mm, and has approximatley 20mm of metal holoding it in place - all i can say is hello diesel!!!!

and after todays efforts, i have nothing in place, so now jsut awaiting my wildcat headers to arrive from johannesburg

nadim

03-08-2005, 10:58 AM

so is there any new news from obs or sdp about the 1.6L header?!?!?

ahb11m

03-08-2005, 11:24 AM

dunno - i gave up and got an exhaust made up

cost me au$305 to have it made custom... and its bloody awesome... 4-1 header design, and for a 1.6 l is prolly best to maximise the power

had a look into this one - mate of mine has a pulsar (variation to the nissan sentra) with a CA-16 so power is realatively equal...

if an body wants the measurements i can get these for you

nadim

03-08-2005, 11:34 AM

hey well i'am very interested on that so i would like the measures yeah and also some pics if u have to see the work if u can plis.
thanks.

dunno - i gave up and got an exhaust made up

cost me au$305 to have it made custom... and its bloody awesome... 4-1 header design, and for a 1.6 l is prolly best to maximise the power

had a look into this one - mate of mine has a pulsar (variation to the nissan sentra) with a CA-16 so power is realatively equal...

if an body wants the measurements i can get these for you

ahb11m

03-08-2005, 11:44 AM

yep i have soem stuff on here....

as to the measures etc i shall get them to ya ASAP

this is the how to that i did
http://www.astinagt.com/forums/showthread.php?t=3732

i forgot about this site (its not my normal home :p)

measurements i will get for you soon ... i'm going to bed, its a bit late (only 2:45 - damn letterman is on late here)

HI-RES

03-09-2005, 06:33 AM

so is there any new news from obs or sdp about the 1.6L header?!?!?

I had word from a supplier they would be available in a few weeks.
This was a week ago.

Bare in mind I mentioned they have been on backorder for a few months...his words - "call me to order" suggest there wont be any problem, but who knows...

I'll touch base again in another week or two

ahb11m

03-09-2005, 06:46 AM

umm dude liverpool exhaust will make up the same one that was made for my car

they supply a lot of muffler shops Australia wide

ahb11m

03-09-2005, 07:10 AM

sorry the measurements

these are in millimetres for accuracy

the pipe at the manifold measures 42x38 (width x height)
this continues out and down 260mm before the first bung hole on the 3rd cylinder....
continues another 420mm until it hits the collector
4 pipes into one collector of 150mm length... this is followed by a gasket to join the rest -

NB this is longer than the original exhaust so will require cut and welding

having said that if you live near an exhaust shop you could insert the mid pipe into extractor and drive to the shop.....if your installing it yourself

oh yeah cylinders 1 and 4 run behind the rest
cylinders 2 and 3 run in the front

HI-RES

03-11-2005, 05:58 AM

i thought u bought a wildcat header? did that fall through?

I want obx because its stainless, the 2.0ltr version goes for $165 US on ebay, cant beat that

ahb11m

03-11-2005, 07:03 PM

i thought i did too

they can do ss, but hey whichever ya like

steve_protege

03-17-2005, 06:19 PM

Good news all!!! Ken has re-opened Protege Garage!! That means that we might be able to FINALLY get our hands on a couple of those OBX headers for our 1.6s. Before Garage closed down for a while, it was the only place that actually listed the header for the 1.6 after everyone (including some companies) said that it didn't exist!! I already asked Ken a couple days ago if he will be selling the header and he told me that he will but has to find out if its been released or going to be released soon. Can't wait now!!! This will hold me over till I get my HiBoost kit in a year or two!!!

Shane5425

03-17-2005, 08:04 PM

Can't wait now!!! This will hold me over till I get my HiBoost kit in a year or two!!!

but in a year or 2 you are gonna want a different car.... lol...

nadim

03-17-2005, 10:41 PM

nice to hear that ,wish that he could sell them as soon as posible.

mazpro

03-18-2005, 12:00 AM

that's great news, now the wait untill they see them.

steve_protege

03-18-2005, 12:24 AM

but in a year or 2 you are gonna want a different car.... lol...

Nah, I hope not. Im pretty loyal to my cars so I hope Im still gonna have love for my car. Ive only had one before the Protege, but I ran it until it died. Im hoping to do the same for this car. We'll see though......

Shane5425

03-18-2005, 01:57 AM

Nah, I hope not. Im pretty loyal to my cars so I hope Im still gonna have love for my car. Ive only had one before the Protege, but I ran it until it died. Im hoping to do the same for this car. We'll see though......

i know ill prolly keep my car till it dies, but it will only be a daily driver and nothing performance about it, i wanna do a miata 302 build... and have that as my weekend car, but thats just dreams...

Shane5425

03-19-2005, 04:37 AM

HI-RES

03-20-2005, 03:02 AM

Rennen Motors told me they're available now, I'm just waiting on a quote & shipping cost.
They sell the 2.0ltr header for $189 so I'm hoping its similar..

steve_protege

03-20-2005, 04:38 PM

Rennen Motors told me they're available now, I'm just waiting on a quote & shipping cost.
They sell the 2.0ltr header for $189 so I'm hoping its similar..

And by "they're" you mean the OBX header for the 1.6 liter sedan, right?

Shane5425

03-20-2005, 05:12 PM

if they cant get them, here is a way to get some, get the exhaust flange from wagner, then get the 2.0 header off of ebay, and get a local muffler shop to reweld the other flange on it..

ahb11m

03-20-2005, 06:36 PM

good idea, but the 1.8/2.0l sits lower in the engine bay, you sure that it would fit around our engine?

Shane5425

03-20-2005, 09:40 PM

i dont see why not, the header might sit a bit lower, but the flex pipe will flex that much for it not to worry about..

ahb11m

03-21-2005, 01:33 AM

the flex pipe? dude the obx on the 2.0 sits butt up against the engine block
the flex pipe is about level with where your feet sit, and its a ball joint

Shane5425

03-21-2005, 01:39 AM

flex pipe is under the car, i mis under stood for s second, i know the what you mean now, the engine in the 1.6l sits higher.. , you would have to measure to see,

ahb11m

03-21-2005, 02:21 AM

thats it... hmm i forget sometimes i have a 1.8 in the drive way......

ok, just having a quick look, the 1.8 has the ball joint back further than the 1.6 btu the flanges are the same, and teh mid flange is the same too, but the OBX has its own flange anyway!!!

it looks shorter, but is a little hard to tell without having the keys to the 1.8 here!!!

Shane5425

03-21-2005, 02:25 AM

get the keys and find out man.. lol

Shane5425

03-28-2005, 11:52 PM

any news on the headers??

ahb11m

03-29-2005, 04:29 AM

sorry, i checked it but forgot to return to the computer!!!

they are different, but similar enough that if your rewelding, you could change the piping to suit...

Shane5425

03-29-2005, 12:35 PM

steve any news on the obx headers?

TampaSport20

03-31-2005, 10:31 PM

Here's an update...SR Motorsports carries a 1.6L header now !!

Shane5425

04-01-2005, 12:48 AM

sweet, whats the address for the site..

Shane5425

04-01-2005, 12:51 AM

they are fuckin nuts.. 698 dollars for headers... i could have some custom made for less than that.. and thats on sale, there original price is 900+ for the headers.. i think it might be a type-0 or they are just freakin nuts..

MIA protege

04-01-2005, 12:59 AM

parts for the 1.6L are always so damn expensive and it never made sense to me considering it doesnt produce much power

Shane5425

04-01-2005, 01:07 AM

the 2.0 are the same price from them so its not just the 1.6l they just overcharge on there shit..

MIA protege

04-01-2005, 01:20 AM

o ok

nadim

04-02-2005, 10:42 AM

well yeah infact i say the same that the parts for the 1.6L are expensive and don't give such power but that too expensive for the header man so wait till what obx will release.

o ok

ahb11m

04-02-2005, 01:52 PM

o ok
you should get a OBX, would be good on your car... and you can sell me your old exhuast for $50 :P

MIA protege

04-02-2005, 03:19 PM

you should get a OBX, would be good on your car... and you can sell me your old exhuast for $50 :P

lol ... (doh)

ahb11m

04-02-2005, 09:53 PM

yeah i suppuse your right... shipping would be a nightmare

Shane5425

04-02-2005, 10:26 PM

yeah i suppuse your right... shipping would be a nightmare
lol

anyways, when is the obx one gonna be released..

Point Six

04-06-2005, 11:32 PM

Here is another voice asking for help. I'm looking for a header for my 2000 1.6 Mazda Protege too. I dont know if I should wait or have it done! I'm from Puerto Rico so, even if I get it at OBX they gona kill me with the shipping charge!

ahb11m

04-07-2005, 05:41 AM

protegegarage.com
they currently have them as far as i knew

Shane5425

04-07-2005, 08:12 AM

he is supposed to be checkin that he can still get them..

nadim

04-09-2005, 11:19 PM

so no obx header yet why is it taking so long....

mazpro

04-10-2005, 01:58 AM

I checked protegegarage.com and the website says that they have them for sale.

Shane5425

04-10-2005, 02:00 AM

yeah key word "Says" once i get some money put together ill test it out and see if they can get it..

mazpro

04-10-2005, 02:04 AM

yeah, I was thinking about doing this, but I love boost, So I'll be saving some more for HiBoost.

Shane5425

04-10-2005, 02:08 AM

i am not boosting until i graduate tech college, and by then i am sure i will want a new car

nadim

04-10-2005, 07:00 AM

but has anybody from u guys bought the 1.6L header for protegegarage.com??????

Shane5425

04-10-2005, 08:05 PM

i dunno of any body , but they said they had..

Shane5425

04-11-2005, 07:25 PM

would guttin out the cat have the same effect on the 1.6l..

Captain KRM P5

04-11-2005, 07:49 PM

sorry for the long wait - currently they dont have any for me, i am waiting on those and the new rx8 header they are working on

Shane5425

04-11-2005, 07:53 PM

captain, pm me when you get them, i am definatly interested in gettin one..

ahb11m

04-12-2005, 08:36 AM

gutting the cat is only illegal.. thats all..

BTW how many cats do you have?

mazpro

04-12-2005, 08:42 AM

2 cats.

Shane5425

04-12-2005, 09:12 AM

gutting the cat is only illegal.. thats all..

BTW how many cats do you have?

so is replacin the header with no cat in it..

ahb11m

04-13-2005, 05:16 AM

i thought you guys only had to pass emissions?

hehe, 2 cats....

i have 1 cat, and it made a hella big difference, on my lil 1.6....

Shane5425

04-13-2005, 08:23 AM

to get an inspection stick where i live, the test icludes, checkin for a muffler, checkin all your lights, and 10 dollars.. all done..

ahb11m

04-13-2005, 09:32 AM

sounds like ours... well NSW anyway

they just make sure exhaust isn't outstandishly loud, lights, brake test, and window tint (darkness) as well as lpg system inspection

Point Six

04-16-2005, 12:43 AM

If anyone got the header on the engine I would love to see some photos!!!!!!!

nadim

05-05-2005, 01:47 PM

so where did the header goo!! no notice still,man why is it taking so long??!?!?!(boom07)

Shane5425

05-05-2005, 01:53 PM

i am tired of waiting for this header, i think ill just gut my cat out go free up some air flow..

nadim

05-05-2005, 02:09 PM

i am tired of waiting for this header, i think ill just gut my cat out go free up some air flow..

yeah it taking to ,uch well i did a custom cat back just waiting for the header,by the way i just pm u a private msg u recieved it???

steve_protege

05-06-2005, 01:46 AM

I think Im going to buy the SR Motorsports header that they offer. Im tired of waiting for this OBX one to come out.

Shane5425

05-06-2005, 08:20 AM

you can turbo for the price of that sr one..

steve_protege

05-06-2005, 09:33 AM

How? Don't get me all excited!!!

you can turbo for the price of that sr one..

Shane5425

05-06-2005, 11:02 AM

its an exageration, 700 bucks is to much for a header, u can get a custom one made for cheaper than that..

nadim

05-07-2005, 08:13 PM

yeah that;s too much man for a header although if u wanna it go for it and tell us,BTW hasn't anybody tried to contact obx again ??

steve_protege

05-07-2005, 10:56 PM

I know it might be a little too much, but what are we to do? There is no sign of the OBX header coming soon and I am bout tired of waiting. I bet these SR Motorsports headers are just as good (if not better) and ready to ship. For some reason, the OBX is in one of those tweener stages: Past the production stage but not quite to the shipping stage. I just can't understand what the hold-up is.. Im dumbfounded (uhm)

ahb11m

05-07-2005, 11:15 PM

go custom, you'd be surpised at the price!

nadim

05-11-2005, 01:49 PM

go custom, you'd be surpised at the price!
hey but why don't u make some as u did urs and sell them ??!!?

J dragon

05-11-2005, 06:29 PM

hey but why don't u make some as u did urs and sell them ??!!?

Because then he would have to establish himself as a business...in starting a business you need Capital..probably something he doesn't have.

Shane5425

05-11-2005, 06:33 PM

just find a muffler shop that does mandrel bends and get ur pipes bent and welded.. wagner has the flange for our engine, 50 bucks.. i think.. and the muffler shop should charge about 100 to 200 for bending them and welding them..

TStar

05-12-2005, 04:55 AM

do you people know how the header affects emissions?? i'd really like to know..

steve_protege

05-16-2005, 06:57 PM

Check it out peeps!! I got a reply from Dave @ OBX Racing and this is his response:

The question was about when the 1.6 liter header would be released...

" We will release the 1.6L Protege header by first week of June.

Thanks

Dave-OBX
General Manager"

There ya go folks!!! The price SHOULD be around $300.00 plus shipping (according to the OBX Racing website). Can't wait till June!!

Steve O

nadim

05-16-2005, 07:10 PM

well great news dude just have to wait till then..
but are they gona sell them on the obx page?

mazpro

05-16-2005, 11:54 PM

great news for us. wanna see the gains these will give us.

Shane5425

05-17-2005, 12:01 AM

prolly lil to none, from what i am seeing most basic upgrades just change the sound of the engine, but who knows the restrictive headers we have might be the cause of it..

steve_protege

05-17-2005, 06:57 PM

I got another response from Dave @ OBX Racing and this is what he said:

" For retail sales, service, discounts and additional inquiries, please
contact: www.tuningdepot.com Their phone number is: (650) 228-1461. Please
ask for Eric or Jeff for special internet discount prices.

Thank you

Dave-OBX "

So all we have to do is call one of those guys and ask about "special pricing" and "discounts". I think after all the delays and false anticipations, we should get a BIG discount!! Maybe knock off like 50 or 60 dollars? That would be sweet!!