Installing o2 bung on CS power series exhaust

[nickbachman]

what does this install consist of? is it difficult? what do i need to do it? i dont want to cut off my o2 sensor and slap on a MIL eliminator.

[122 Vega]

Buy a bung, weld it on.

britt

[hawaiian_msp]

http://www.msprotege.com/forum/showthread.php?t=66426&page=1&pp=15&highlight=SPARK+PLUG

here you go, read up :D no cutting, no welding. just a $5 part from your local auto shop. nope this helps...

[nickbachman]

that sounds great! cant believe i missed it. so i'd still need to weld a bung onto my corksport pipe? then just screw in the anti-fouler?

[hawaiian_msp]

no you just use the existing bung on the "J" pipe before the cs exhaust. it has a screw in it right now. unscrew that and screw the non foulers into that, then your o2 sensor into the non-foulers then "WALA" you're done :D

[nickbachman]

sweet! i didn't know there was an existing bung with a screw in it! just confirms my suspicion that mazda is a bunch of bung-pluggers. hohoho, i slay me.

[UnNaturalinc]

no you just use the existing bung on the "J" pipe before the cs exhaust. it has a screw in it right now. unscrew that and screw the non foulers into that, then your o2 sensor into the non-foulers then "WALA" you're done :D

Correct

You don't need to add anything to the Power Series system.

The bung in the downpipe piece is where the o2 mounts on the non-MSP models.