View Full Version : MSP has 2 different injectors ??
tekkie
10-30-2004, 12:41 PM
So whats up with this, there are 2 purple and 2 green injectors, both have different part #'s written on them. Does anyone know what the difference is? I swapped mine to WRX 440cc injectors anyway but I am just curious.
Chojin
10-30-2004, 06:36 PM
tekkie-
The injectors flow exactly the same amount of fuel; it's the direction of their spray patterns that are different. Since the intake manifold's runners are not straight on into the head's ports, each injector's spray pattern is directed towards the port. Hope that makes sense.
-Shawn
dominoy2k1
10-30-2004, 06:53 PM
what the? shawn...back from the dead eh? also the msp injectors flow more than the stock protege ones, right?
low_psi
10-30-2004, 06:54 PM
wow, where have you been Shawn? still working on the MSP I hope?
low_psi
10-30-2004, 06:57 PM
also the msp injectors flow more than the stock protege ones, right?
negative, they are the same :)
dominoy2k1
10-30-2004, 06:57 PM
oh ok
Striker187
10-30-2004, 09:30 PM
so does this mean that when replacing the injectors with larger ones, do we have to make sure they spray in the right direction?
btw, where ya been shawn? last time i was down at the dealership, they said you weren't there anymore :(
tekkie
10-31-2004, 09:32 AM
hmm different directions eh? well I wonder how it likes my WRX injectors that are all the same ? ok now I gotta get more info on this
thanks for the info though :)
JeffTSi924
11-01-2004, 06:36 PM
btw, where ya been shawn? last time i was down at the dealership, they said you weren't there anymore :(
Shawn doesn't work for mazda anymore, sux but what can ya do...
btw, I guess I'll intro myself... I'm Jeff his younger brother (rei)
Mike R
11-01-2004, 06:40 PM
Sweet, always wondered what the deal with the injectors was. The wierd thing is that my car is rich on 1&4 and lean on 2&3.
Striker187
11-01-2004, 08:23 PM
so does this mean we do have to worry about the direction they spray?
and wassup to you, jeff :). nice eclipse.
casper
11-02-2004, 02:05 AM
threadjack
It's a Talon, but hey.. who's counting. :-P
Jeff, if you have some pics or any info on the car PM me.. I love DSMs. (drive)
/threadjack
tekkie, how are the WRX injectors running for ya, and do you know what the flow is on the normal injectors?
tekkie
11-02-2004, 09:21 AM
the WRX injectors are running fine with the emanage, without it is a no go
the stock injectors are 280 cc compared to the 440cc wrx ones
there are other members running the wrx injectors without problems as well
Striker187
11-02-2004, 10:25 PM
oh duh...it's written in his sig.....(hand)
BinaryRotary
11-09-2004, 12:53 AM
I'm planning on running 1st Gen RX-7 GSL-SE 680cc injectors. Just lock and load.
Powered by vBulletin® Version 4.1.7 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.