JoeP's FCD

[b00sted]

hey guys, i lost my directions for this and i need to know how to adjust it because im still hitting fuel cut. i know you have to use an allen key to adjust the allen screw but which way and how do you guage how much to turn it? thanks! i mailed joep about this but he hasnt responded so ill try my luck here.

[cosmo420]

I am currently waiting for mine to come in, was it a bitch for install or not?

[MSP #167]

you turn it clockwise,to raise the cut. I'm not sure how much you should turn it though there is nothing in the directions saying how much to turn it. I wouldn't turn it too much higher than you have it now.

[orng1]

At what boost are you hitting cut

[DSMConvert]

hmm its usually set from joe...turn it maybe a 1/4 of a turn at a time, its very sensitive...when i set mine this is how i adjusted it...it is an extremely easy install...ended up using that misc bolt on the fender between the headlight and washer fluid bottle...Used scotch locks to tap into the maf wires, and ran the vac line...took about 30min.

[b00sted]

yea mines installed too...also very easy for me. i installed my fcd and i wasnt even hitting fuel cut *before* my car went to the dealership to get new tranny, clutch,flywheel at around 11psi. then when i just got my car back from the dealership, i was hitting fuel cut at around 8psi...even with the fuel cut...? any ideas as to why this might be?