PDA

View Full Version : Whats standard on a 03 mazdaspeed?



regdent
09-23-2004, 10:29 AM
As i found out the other day the bov wasnt standard, so i was wondering if the following items are standard:


1. 3" exhaust
2. 3 gauges mounted just above the head unit
3. a brace bar on the front
4. a red brace bar on the back

and there is a square hole to the below left of the steering wheel with a wire and a conector block on the end. anyone have any idea what was there??

Thanks for your help.

Spooled
09-23-2004, 10:36 AM
I'll take this one (see below):


As i found out the other day the bov wasnt standard, so i was wondering if the following items are standard:

1. 3" exhaustNo, I think it's 2.25"


2. 3 gauges mounted just above the head unitNope, that's something that one of the members on the forum sells for very cheap.


3. a brace bar on the frontYes.


4. a red brace bar on the backYes.



and there is a square hole to the below left of the steering wheel with a wire and a conector block on the end. anyone have any idea what was there??

I'm not 100% sure, so someone correct me if I'm wrong, but I believe that's a diagnostics port.

I_Vtec
09-23-2004, 10:37 AM
1) The factory exhaust is 2.5 I think.
2) No gauges
3) Strut bar is standard
4) It has front and rear sway bars if that's what you mean

*edit* Beat me to it!:p

regdent
09-23-2004, 10:42 AM
thanks guys.

one more:

when i got pulled over the sherif said the tinted windows wernt standard.

i have a silver mazda and the tints are silver looking on all the windows except the front windscreen. The cop didnt like the front sides tinted said that wasnt standard.

having the tint on the front side windows is that standard? (the cop did say that the tinting job was a good one. Unlike the rest of the mods which have been done on my car)

thanks again for your help.

I_Vtec
09-23-2004, 10:43 AM
Tint isn't standard.

xtrememps
09-23-2004, 10:45 AM
Welcome and hook that shit up nice!

AZMSP84
09-23-2004, 12:35 PM
Ha! The stock exhaust is 1.8" I.D. at the flanges. WooHoo

1moreMPH
09-23-2004, 01:28 PM
thanks guys.

one more:

when i got pulled over the sherif said the tinted windows wernt standard.

i have a silver mazda and the tints are silver looking on all the windows except the front windscreen. The cop didnt like the front sides tinted said that wasnt standard.

having the tint on the front side windows is that standard? (the cop did say that the tinting job was a good one. Unlike the rest of the mods which have been done on my car)

thanks again for your help.


In most states if the tint is darker than 35%-ish, it's illegal, and also if it's the silver ''mirrored'' type stuff it's illegal as well. Check with your laws (it may be just the front two can't be tinted silver). Tint is not standard...but it looks hella tight!

1moreMPH
09-23-2004, 01:29 PM
Ha! The stock exhaust is 1.8" I.D. at the flanges. WooHoo


are they really 1.8??!??! where'd you get that? THAT SUCKS....

nate0123
09-23-2004, 01:30 PM
thanks guys.

one more:

when i got pulled over the sherif said the tinted windows wernt standard.

i have a silver mazda and the tints are silver looking on all the windows except the front windscreen. The cop didnt like the front sides tinted said that wasnt standard.

having the tint on the front side windows is that standard? (the cop did say that the tinting job was a good one. Unlike the rest of the mods which have been done on my car)

thanks again for your help.did you get ticketed? removal order?

yanyan
09-23-2004, 01:32 PM
i always thought the stock exhaust was 2.25... wtf.

regdent
09-23-2004, 03:28 PM
i got the ticket for speeding he let me off the tints and he said my exhaust was too loud but let me off.

03MSP
09-23-2004, 06:01 PM
Well, I remember someone cut the stock exhaust and measured it, it may be 2.25" somewhere, but it goes as small as 1.8"...so yeah, it sucks.

Mike R
09-23-2004, 06:07 PM
Did you buy this car from a dealer? Was there an inspection? If it has illegal modifications then it is the dealers' responsibility to make it legal for sale. And if it was inspected the tint should have been removed.

AZMSP84
09-23-2004, 11:57 PM
Definately 1.8" I took my exhaust off to make a new one and I was going to use the stock flange and drill it out, but that didn't work. Yea I know I couldnt believe it either.

Spooled
09-24-2004, 12:01 AM
No wonder exhaust helps so much!

1moreMPH
09-24-2004, 03:01 PM
No wonder exhaust helps so much!

A M E N ......that's rediculous, i had no idea.....

orangezoom
09-24-2004, 03:06 PM
The wire you are talking about to the lower left of the wheel was probalbly a turbo timer.

orangezoom
09-24-2004, 03:06 PM
Like this

regdent
09-24-2004, 03:43 PM
thanks for all your help guys, i am planning on modding this car and doing it right.

The car was bought from a mitsibishi dealer guy must have traded it in. i am ok with the tint it looks good and was done properly. thanks for your help guys.

Striker187
09-24-2004, 08:14 PM
yeah that would be me who measured it. the outer diameter may be 2.25" but the piping is quite thick so the inner diameter is really small. then again, i believe the evo makes 280ps on 45 mm piping!!!!