cut out

[Aaron]

will this fit before the 2 cats on the stock exhaust on a MSP??

Steel, black hi-temp finish, 2 1/2 in. diameter tubing, exhaust cut-out

Just weld in a Summit exhaust cutout behind each header and you'll be able to convert to an open exhaust at the track.


http://static.summitracing.com/global/images/prod/large/sum-g4820.jpg

[DSMConvert]

there is a donut flange between the jpipe and the cats, so you'd hav to have it cut off and the cutout welded inbetween, or flanges welded inbetween...also stock exhaust is around 2 inches so there would be flange fitament issues...see if you can find one that is 2inch....

[505zoom]

Jump in on the GB for the QT electronic cutout. We need one more person.

Check out this thread:

http://www.msprotege.com/forum/showthread.php?t=77734&page=1&pp=15

[Aaron]

I have seen it cheeper. search for mpp2 cutout on google 110+s/h and a 28 cutout from summit racing.

[t3ase]

http://www.msprotege.com/forum/showthread.php?t=80687