Official P5 wheel thread. [Archive] - Page 3

Dom 2.0L

03-12-2009, 06:38 PM

So hard to choose! I want to swap to 17" this summer, but I can't make up my mind on what rims I want! What do you think of those? Don't know if it's a car on the forum, but they're Axis Neo. No clue on the price, weight or offset though.

http://i362.photobucket.com/albums/oo70/Dom_2L/09.jpg

Rage87

03-14-2009, 01:47 AM

looks like he's going off roading
http://www.msprotege.com/members/mooS%20mooS/rally%20bar%20installed%20(Large).JPG
plus i don't think it would help if you hit another car with that thing being so low.... might help with dogs, cats, or small children

That looks a lot better than I thought it would. I'd want a bar in the back too.

JDM-P5

03-14-2009, 01:27 PM

18s wamp wamp what it do.
http://lh6.ggpht.com/_BxFtmy0I1Y8/SbnID16xnDI/AAAAAAAAEuA/9KgjBV49XdA/s720/DSC04076.JPG

http://lh3.ggpht.com/_BxFtmy0I1Y8/SbnIEs8nk3I/AAAAAAAAEuQ/3hRMQyh8qQ4/s800/DSC04078.JPG

fishdonotbounce

03-14-2009, 01:50 PM

Can't believe I haven't posted here yet. Here's my setup. 17" MB Speed Bronze. +43 offset I think.

http://i289.photobucket.com/albums/ll221/fishdonotbounce/100_1626.jpg

JDM-P5

03-14-2009, 02:03 PM

Oooohhhh...{BWC}!!!
Naughty tiiiiiiime!

alexelie

03-14-2009, 04:23 PM

wow! they look great! i even tought they were 18''. Do you have any pictures from the side? i saw those wheel in a car mag and i tought they looked awsome, and i think they are cheap arent they?

fishdonotbounce

03-14-2009, 04:29 PM

Yea I love the fact that they look like 18's. i think it's cause the spokes come out all the way to the lip. Yea, I think they were around 125 a piece if I'm not mistaken. Lemme go see if I can find some side pics for ya....

fishdonotbounce

03-14-2009, 04:34 PM

http://thumb0.webshots.net/t/69/569/3/79/26/2299379260103495180TCbUdm_th.jpg (http://good-times.webshots.com/photo/2299379260103495180TCbUdm)

http://thumb0.webshots.net/t/50/750/1/37/52/2656137520103495180hAsOlS_th.jpg (http://good-times.webshots.com/photo/2656137520103495180hAsOlS)

http://thumb0.webshots.net/t/69/569/2/10/93/2231210930103495180GDdKpr_th.jpg (http://good-times.webshots.com/photo/2231210930103495180GDdKpr)

fishdonotbounce

03-14-2009, 04:35 PM

there ya go. Just click on em.

alexelie

03-14-2009, 08:16 PM

like it a lot

fishdonotbounce

03-14-2009, 09:19 PM

Thank you. She's definitely been a labor of love.

MazdaSpeeder

03-14-2009, 09:31 PM

Those are very nice...

mrpopo573

03-15-2009, 12:43 AM

ahhh wheel Jealousy. I just picked up some 03 P5 wheels for my 02 and I feel pretty cool. Then I saw your wheels. lol.

Dom 2.0L

03-15-2009, 08:54 AM

Thank you. She's definitely been a labor of love.

They DO look like 18s lol couldn't believe it! What are the specs of your tires? And are they heavy? Awesome wheels

bazooka joe

03-15-2009, 09:46 AM

thoughts about these on my silver p5?
17" light as well

dave45090

03-15-2009, 10:01 AM

thoughts about these on my silver p5?
17" light as well

I like them alot! Good choice.

magnumP5

03-15-2009, 10:49 AM

thoughts about these on my silver p5?
17" light as well
Not bad. The only member I know of who has these is haze20, but he has a MSP and his wheels are 18's and have the SBC coating.

fishdonotbounce

03-15-2009, 01:31 PM

They DO look like 18s lol couldn't believe it! What are the specs of your tires? And are they heavy? Awesome wheels

The tires are just some Generals. The usual 205/40 setup. The rims don't seem to be very heavy but what do I know. I haven't been able to find the weight specs on em.

Those are very nice...

Thank you.

APutvinskiMP5

05-04-2009, 12:55 AM

wheels: Enkei TBS-11 17x7 +38
tires: Kumho Ecsta 215/40/17
springs: not yet

http://www.msprotege.com/members/APutvinskiMP5/wheel%202.jpg

http://www.msprotege.com/members/APutvinskiMP5/wheel1.jpg

HKPRO5

05-04-2009, 01:04 AM

Does this count?

Wheels Mazdaspeed6 Stock Rims
Tires 225/45/18 Nexen
Springs Tein Super Street coilovers
http://i9.photobucket.com/albums/a82/lancerevil/IMG_0451.jpg

01bluemp3

05-04-2009, 08:05 AM

wheels: Enkei TBS-11 17x17 +38
tires: Kumho Ecsta 215/40/17
springs: not yet

http://www.msprotege.com/members/APutvinskiMP5/wheel%202.jpg

http://www.msprotege.com/members/APutvinskiMP5/wheel1.jpg

sexy!!

RGN .5 AASN

05-04-2009, 01:18 PM

Rockin03mp5

05-05-2009, 03:09 AM

wheels: Enkei TBS-11 17x17 +38
tires: Kumho Ecsta 215/40/17
springs: not yet

how did you fit 17x17's in a +38 offset on the p5?

fishdonotbounce

05-05-2009, 08:02 AM

Because he's not lowered yet therefore he doesn't have to worry about rubbing issues.

APutvinskiMP5

05-05-2009, 08:39 AM

yeah there are no rubbing issues because its not lowered yet, and rolling the fenders a tad would solve that. and thank you frank again for a great sale.

Rockin03mp5

05-05-2009, 01:50 PM

Because he's not lowered yet therefore he doesn't have to worry about rubbing issues.

look closer... 17x17? that is huge!

and doesnt stock suspension have more travel?

fishdonotbounce

05-05-2009, 01:51 PM

lmao that's funny. I thought you were talking about the offset. I completely missed that typo.

APutvinskiMP5

05-05-2009, 03:13 PM

hahah woops, well uh, this is embarassing, good call

Dom 2.0L

05-10-2009, 09:06 PM

Pictures soon! Going to pick these babies tuesday
Daï Nebula Hyper Silver 17x7 +42 offset, on General Exclaim UHP 205/40R17
http://www.driftnamiperformance.com/v/vspfiles/photos/DA-NEBULA-3.jpg
They WILL be 5x114.3 don't worry

rooster1

05-11-2009, 08:38 PM

be sure to post pix!

MonkeyBone

05-11-2009, 11:26 PM

Does this count?

Wheels Mazdaspeed6 Stock Rims
Tires 225/45/18 Nexen
Springs Tein Super Street coilovers
http://i9.photobucket.com/albums/a82/lancerevil/IMG_0451.jpg

225/45/18!!! No rub???

(boom04)

Dom 2.0L

05-12-2009, 07:49 PM

Finaly got my new 17" wheels! Awesome tires and I love the look
Wheels: Daï Nebula 17x7 +42 offset 5x114.3
Tires : General Exclaim UHP 205/40ZR17
http://i362.photobucket.com/albums/oo70/Dom_2L/DSC_0391.jpg
http://i362.photobucket.com/albums/oo70/Dom_2L/DSC_0368.jpg
http://i362.photobucket.com/albums/oo70/Dom_2L/DSC_0385.jpg

Dom 2.0L

05-19-2009, 06:23 AM

225/45/18!!! No rub???

(boom04)

Must be 225/35, this tire is too slim to be 45 if you ask me

HKPRO5

05-19-2009, 12:30 PM

No those are 45 i do get a little rubbing on the inside but not much.

Dom 2.0L

05-19-2009, 10:09 PM

oh well my mistake! They look slimer than my 40s 205 but it must be the pic

detroitcity

05-21-2009, 11:51 PM

Hey guys,

I'm looking to put some new wheels on my 02 Pro5

four 16x8 OZ wheels
>5x114.3 lug pattern
>40 offset
Tires: 245-50

Will this setup work? What is the basic rule about offset?

Does a smaller offset mean that the wheels sit more inward?

I need some basic advice, cuz I need some new wheels badly.

Thanks

detroitcity

05-22-2009, 12:06 AM

Also how do you think they will look?

Rockin03mp5

05-22-2009, 08:47 AM

i think 16x8 will be too big, especially at +40 offset.

from what i know (some may beg to differ) +45 is the lowest you should go for offset. and 8'' wide might be too wide.

if you already have them though, which it looks like, doesnt hurt to try.

if not, i would doubt they would work without a lot of work.

aMaff

05-22-2009, 09:55 AM

The limit without rolling the rear fenders, as far as my personal experience, on a 16x7 wheel is +42, and that had some decent rubbing already. Plugging that into THIS (http://www.1010tires.com/WheelOffsetCalculator.asp) tool, a 16x8 +40 would stick out another 15 mm, which would likely require a SERIOUS fender pull to clear, not just a roll. And with 245s, you have exactly zero chance without doing some serious fender modification.

detroitcity

05-22-2009, 04:34 PM

Gracias gentlemen,

I was just wondering if it was even worth going to look at these wheels (someone had them for sale on craigslist).

I've since taught myself more than I ever wanted to know about wheels and offsets.

Picking up some stock wheels in Toronto this weekend.

dj4monie

05-27-2009, 07:53 AM

I am looking to pickup a P5 tomorrow, maybe. Its for courier work so I won't sink alot of money into it, but that doesn't mean I don't want it to look nice as I plan on keeping it for quite awhile.

Looks like most of the wheels available have high offsets. I want some lip!

http://www.buywheelstoday.com/images_products/S_4335.jpg

Or maybe a JDM look

http://www.buywheelstoday.com/images_products/S_1275.jpg

imola.zhp

05-29-2009, 04:25 PM

http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs012.snc1/2919_1053378182320_1461777067_167111_4278035_n.jpg

17" Mazda 3's, 205/50-17 bearly clearing the bottom of the rear struts...

Stock springs, KYB GR2 shocks.

It's TALL...

dxaveP5

05-29-2009, 04:54 PM

^^^ Imola, i think if you drop it a bit, and or get some thinner tires it'll look alot better of course.
but the thinner tires is a must, it'll make those 17"s look alot bigger and stand out more than those thick tires, but other than that i love it.
was bout to get those but i got the 03.5 MSP harts for 350 w/tires in AMAZING condition :D

imola.zhp

05-29-2009, 09:46 PM

^ nice!

My OEM's were "chrome" and flaking bad, plus the 16" tires were BALD from bad bearing and alignment issues...

I picked these up with WAY over 50% tread for $250. Way cheaper than 4 new 16" tires.

This is my daily beater, I did have some MSP springs on it at one point, but they only lowered the front .5," the back was dumped at 1", the reverse rake was not attractive. I'm digging the nose-bleeds actually, I can run over stuff. I'll save the suspension mods for the bimmer...

1991cc

09-03-2009, 11:38 AM

I bought new wheels and I'm bringing this thread back to life!
Akita AK-6
17x7 +40
205/40-17 Yokohamas
Fenders rolled, but still very slight rubbing.

1991cc

09-03-2009, 11:39 AM

One more:

EGTT91

09-03-2009, 02:21 PM

17" Mazda3's 215/45/17 Nexen N5000s
http://i57.photobucket.com/albums/g220/Tino6988/IMG_0354.jpghttp://i57.photobucket.com/albums/g220/Tino6988/IMG_0357.jpg
http://i57.photobucket.com/albums/g220/Tino6988/IMG_0366.jpg
http://i57.photobucket.com/albums/g220/Tino6988/IMG_0351.jpg

CTt3P5

09-03-2009, 04:09 PM

I bought new wheels and I'm bringing this thread back to life!
Akita AK-6
17x7 +40
205/40-17 Yokohamas
Fenders rolled, but still very slight rubbing.

Looks good but I don't envy you cleaning them.

17" Mazda3's 215/45/17 Nexen N5000s

Any issues with the 215's? Last year when I was looking into those same wheels I was worried about stretching the 215 on a 6.5" wheel.

EGTT91

09-03-2009, 04:21 PM

nope, no issues whatsoever, I didnt have any problems mouting them and no issues driving on them either.

1991cc

09-04-2009, 10:49 AM

[QUOTE=CTt3P5;4810898]Looks good but I don't envy you cleaning them.

Thanks, I know but for me at least that's half the fun of having nice wheels.

Circuit

09-08-2009, 12:22 AM

Volk GT-P
17x7 +44
BC Racing coilovers
BFG G-Force Sport 215/40/17

http://i351.photobucket.com/albums/q443/circuitP5/IMG_0165.jpg

323

09-08-2009, 12:26 AM

nice!!!

EVADE

09-08-2009, 04:23 AM

Rota D2 18x8 +48offset Toyo Proxes4 205/40/18
http://i195.photobucket.com/albums/z260/EVADE759/DSC00403.jpg

http://i195.photobucket.com/albums/z260/EVADE759/DSC00402.jpg

Circuit

09-08-2009, 12:23 PM

Wow. Usually I dislike 18's on proteges but yours looks awesome. I am sure it rubs like crazy haha.

Shi-Fu JaY

09-08-2009, 01:44 PM

Advan SA3R 16x7 25mm offset 205-50-16 Dunlop DZ101
http://i8.photobucket.com/albums/a48/JDMGoSpeedRacer/IMG_0117.jpg
http://i8.photobucket.com/albums/a48/JDMGoSpeedRacer/IMG_0111.jpg

geomatics_tech

09-08-2009, 06:14 PM

Advan SA3R 16x7 25mm offset 205-50-16 Dunlop DZ101

Very nice!

Are you using a spacer?

Shi-Fu JaY

09-08-2009, 08:57 PM

Very nice!

Are you using a spacer?

none what so ever
although the front could use another 5mm

HKPRO5

09-09-2009, 12:39 AM

Is that a rear diffuser?

JC-MP5

09-09-2009, 01:06 AM

You know, I don't usually like that wheel style. But you've pulled it off! That being said, well done! :D

thorracing271

09-09-2009, 03:27 AM

16" Rx8 Rims
unknown offset

http://i48.photobucket.com/albums/f246/crazycubano271/Photo0053.jpg
http://i48.photobucket.com/albums/f246/crazycubano271/Photo0051.jpg
http://i48.photobucket.com/albums/f246/crazycubano271/Photo0052.jpg

EVADE

09-09-2009, 04:22 AM

Advan SA3R 16x7 25mm offset 205-50-16 Dunlop DZ101
http://i8.photobucket.com/albums/a48/JDMGoSpeedRacer/IMG_0117.jpg
http://i8.photobucket.com/albums/a48/JDMGoSpeedRacer/IMG_0111.jpg

Damn! very different like it. Id run some 205/45/16 or 195/50/16 and then slam it. I like Work Equips better though=)

Circut- actually hardly any rubbing at all because of rolled fenders

jazn

09-09-2009, 10:41 AM

Volk GT-P
17x7 +44
BC Racing coilovers
BFG G-Force Sport 215/40/17

http://i351.photobucket.com/albums/q443/circuitP5/IMG_0165.jpg

circuit, your p5 looks sick! have you always used stock struts with your set up?

fishdonotbounce

09-09-2009, 10:42 AM

BC's are full coilovers meaning they replace his stock struts and springs...

jazn

09-09-2009, 10:58 AM

thanks...

fishdonotbounce

09-09-2009, 11:01 AM

np :D

bazooka joe

09-09-2009, 11:44 AM

dxaveP5

09-09-2009, 01:08 PM

nice Bazoooka :)

bazooka joe

09-09-2009, 01:14 PM

nice Bazoooka :)
you too!

fishdonotbounce

09-09-2009, 01:32 PM

bazooka did you see my message?

bazooka joe

09-09-2009, 08:31 PM

no(uhm)

fishdonotbounce

09-09-2009, 09:52 PM

The visitor message in your profile. Not a pm lol. I was asking whether you were coming to Phen's or not? It'd be cool to have two turbo'd auto P5's there :D

flaps720

09-27-2009, 11:16 AM

sorry but the search terms are way too broad to produce decent results... can someone tell me or direct me to the stock wheel dimensions for the p5? i wanna know if i can throw them on my rx-8 while I get the stockers powder coated

fishdonotbounce

09-27-2009, 11:35 AM

16x6 + 50 offset i believe

flaps720

09-28-2009, 10:53 AM

thanks!

ehirshman

10-06-2009, 07:19 PM

These are by far the nicest rims I've seen on a P5. Can you tell me how much you have lowered the car and if you have any clearance issues? Also, when I do a search, the Heidfelds that come up don't look like yours. They don't have all of the rivets?

dirtyz

10-07-2009, 11:25 AM

So i know absolutley nothing about tires/rims/wheels.

But I am looking to get a set of rims/tires for the winter, and then have another set for the summer.

I came across these on Craigslist. Would this work for me?

Link (http://grandrapids.craigslist.org/pts/1408908172.html)

CTt3P5

10-07-2009, 11:30 AM

I'd ask the seller these questions

1)offset
2)bolt pattern

And do you drive a hatch or sedan?

If you drive a hatch you'll want at least a +45 or higher offset, sedan you should be able to get away with +42.

And bolt pattern for our cars is 5x114.3/5x4.5

CalgaryAE92

10-17-2009, 01:56 AM

What a great thread! I just picked up some 18x7.5 +48 gunmetal Volk TE37s and I can't wait to mount them on my P5. Now I just have to pick some tires!

I have been reading some of the very informative threads on the forum and it would appear the safest size of tire to run is 215/35/18. It looks like at least ONE person is running 215/40/18. I have a completely stock suspension and I would prefer a 40 series tire over a 35. Why is 215/40/18 no good? Is it because the tire will hit the spring perch of the strut? Because there's plenty of room under the fender.

Input from anyone with experience would be greatly appreciated! Thanks.

Matt V

10-17-2009, 11:29 AM

I'm so jealous, those are my all-time favorite wheels.

I would run the tire size that is recommended on here if you don't wanna run into issues with rubbing.

CalgaryAE92

10-17-2009, 07:15 PM

Thanks Matt V. I lucked out a bit with the wheels. There was someone selling a slightly used set locally (wheels are date stamped Feb 2008) and they are in fantastic shape. He was running them on his Prelude.

I thought about it some more and you're totally right about the tire size. Besides, Tirerack is having a crazy sale on Hankook Ventus RS2's in 215/35/18. $71/tire. I couldn't believe it. So I just ordered a set! I'll have to post pics when I have the wheels on the car.

CalgaryAE92

11-17-2009, 06:20 PM

So I put the TE37s on. Overall, I am very happy with them! I was concerned that 18's might look too big, but I think they're alright. I'm also on stock suspension and the 215/40/18's on there right now don't rub at all and fill out the wheel wells quite nicely. However, the tires are worn and will be replaced in the summer with the 215/35/18's that I've already bought. If I would have known, I think I would have picked up some 40's instead of 35's. Anyhow, I think the wheels will be on for a week and then they'll have to come off before it snows.

323

11-17-2009, 06:21 PM

NICE wheels. now u need to lower it :D

JDM-P5

11-17-2009, 06:23 PM

Lower me now...listen to your car.

CalgaryAE92

11-17-2009, 06:35 PM

Thanks. I knew the first comments would be to lower the car :). If I am REALLY to listen to what my car is saying, I would lubricate and change the rear sway bar bushings!

hornsfan10609

11-17-2009, 06:52 PM

JDM-P5

11-17-2009, 08:04 PM

Thanks. I knew the first comments would be to lower the car :). If I am REALLY to listen to what my car is saying, I would lubricate and change the rear sway bar bushings!

Haha...true true.

CalgaryAE92

11-17-2009, 09:12 PM

Sorry, didn't mean to change the topic to "clunking".

Anyhow, back on topic. I've added a couple of more close up pics of a rear wheel and one of a front wheel. You can see that with the 215/40/18 tire (Falken FK452), it gets close to the spring perch, but there's definitely enough clearance room. Same story up front. Also, there's no rubbing at full left or right turn. The wheel itself is 18x7.5 +48 and it gets close to the suspension, but it also clears.

So I don't know why the fitment guide says to use 215/35 and it looks like most people that run 18s do the same? I know every tire is different, but has anyone had problems with 215/40/18's?

EVADE

11-18-2009, 02:51 AM

the tires size is set up 215/35/18 so its closer to overall stock wheels and tires for better performance. But it up to you in the end in what you want. Im using 205/40/18 tires on my 18x8 rims=)

EVADE

11-18-2009, 02:54 AM

just other wheels
18x7.5 Kosei K3 +47 offset 215/35/18
http://i195.photobucket.com/albums/z260/EVADE759/DSC00501.jpg

CalgaryAE92

11-18-2009, 11:24 PM

Evade, both your sets of wheels look awesome. Did I read that right, 205's on an 8" wheel? Good to know that works out for you.

1991cc

11-19-2009, 12:59 AM

I used to run 205s on an 8", it didn't even look stretched.

br289165

11-23-2009, 11:31 PM

Anybody runnin this size wheel with Eibach Prokit? If so does it rub?

1991cc

11-24-2009, 01:10 AM

hmm ... are your fenders rolled?? if not good luck getting an 8" on without rubbing.

sethro_GT

12-04-2009, 12:41 PM

imola.zhp

12-04-2009, 06:36 PM

^ nice!

Sveivo

12-08-2009, 10:40 PM

Unbelievable snow storm!

CTt3P5

12-08-2009, 11:35 PM

2007 Mazda5 17x6.5x52mm with the bald 205/50/17 oem toyo's. Speedo is off but no rubbing. Handling improvement was tremendous. Don't want to lower it, I like my undercarriage without scrape's and abuse; and it handles sweet as is.

http://i701.photobucket.com/albums/ww14/sethro_GT/Protege5/p5_m5wheels.jpg

Nice! I've always wondered what these would look like on the P5.

Unbelievable snow storm!

Looks so much better than my blizzaks on steelies.

JDM-P5

12-08-2009, 11:51 PM

Anyone run stretched tires on their car?

sethro_GT

12-09-2009, 03:35 AM

massive EDIT (info was not needed)

Just mounted Mazda3 16x6.5 52.5mm with the tires from my trashed stock wheels (hit curb with two of them at speed).
http://i701.photobucket.com/albums/ww14/sethro_GT/Protege5/P1000772.jpg

Sveivo

12-09-2009, 10:59 AM

Looks so much better than my blizzaks on steelies.

Thanks ;). I have run the steelies for years but just grew to dislike the look of them. There is no reason to have your car looking less than great in the winter time. :)

CTt3P5

12-09-2009, 01:01 PM

Thanks ;). I have run the steelies for years but just grew to dislike the look of them. There is no reason to have your car looking less than great in the winter time. :)

True but for $200 for the package I can't complain.....for now. ;)

Sveivo

12-09-2009, 04:58 PM

True but for $200 for the package I can't complain.....for now. ;)

I can totally understand that, especially since it's so hard to shop for wheels for this car (fitment-wise).

Are you satisfied with the treadwear on your Blizzaks? You have LM-25 I am assuming?

CTt3P5

12-09-2009, 05:04 PM

I can totally understand that, especially since it's so hard to shop for wheels for this car (fitment-wise).

Are you satisfied with the treadwear on your Blizzaks? You have LM-25 I am assuming?

So far I am....just had the car inspected and the fronts are 7/32 and the rears are 5/32. I ran them approx. 3500 miles last year and not sure how many miles the original owner put on them the one season they were used (bought them used off of cl for $100).

And they are WS-50's. Only gripes are noise and mushy feel on dry pavement but they are snow tires, so.......

Sveivo

12-09-2009, 05:18 PM

So far I am....just had the car inspected and the fronts are 7/32 and the rears are 5/32. I ran them approx. 3500 miles last year and not sure how many miles the original owner put on them the one season they were used (bought them used off of cl for $100).

And they are WS-50's. Only gripes are noise and mushy feel on dry pavement but they are snow tires, so.......

That sounds very good. Mine are LM-25 with slightly harder compound, I think. Hope to get some decent treadwear results with them as well.

Graeter

01-19-2010, 03:33 PM

Quick Question:

Whats all needed to fit a 17x8+40 rim on the protege5. I`m assuming just a solid roll and it will be good?

1991cc

01-20-2010, 02:03 AM

Quick Question:

Whats all needed to fit a 17x8+40 rim on the protege5. I`m assuming just a solid roll and it will be good?

I had that setup without any roll and it rubbed terribly, so I think even with a roll you'll rub a bit ... that is assuming that you're dropped.

br289165

01-20-2010, 03:50 PM

What profile/width were the tires? How much of a drop did you have?

I had that setup without any roll and it rubbed terribly, so I think even with a roll you'll rub a bit ... that is assuming that you're dropped.

1991cc

01-21-2010, 10:14 PM

What profile/width were the tires? How much of a drop did you have?

205/40-17 tires, about 1.5" drop

br289165

01-22-2010, 02:53 AM

That's a 6.75 mm greater tire height. Was it rubbing on the lips in the rear?

205/40-17 tires, about 1.5" drop

MonkeyBone

01-22-2010, 12:33 PM

Winter rims looks great!!!

14"x5.5", 38mm offset, 67,1mm hub bore 1995 Eagle Talon rims wrapped with 185/70QR14 Michelins X-Ice, painted dark bronze.

http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs068.snc3/13551_101427466549803_100000476502379_34957_734532 6_n.jpg

CTt3P5

01-22-2010, 12:44 PM

^^^Nice, I should really find the time to paint my '93 Eclipse steelies this summer. If I do I'll have to start a poll for color choice.

Ready To Ride

01-23-2010, 09:21 PM

Spooky, where is this Auto RnD place? I'm new around here, in Los Angeles and could use some help finding local shops that got the parts and can do the work. Any other Locals that could point me in the right direction?

808MP5

01-27-2010, 03:27 AM

damn... now where did those pics go... yes i've searched but we all know how that goes....

wanna see some 17" mazda3 rims... the 5 spoke ones and tire size please...
i went shopping for tires for my 19's and i think it's time to give them a rest cuz tires for them are just to darn expensive

Circuit

01-27-2010, 03:31 AM

808MP5

01-27-2010, 03:39 AM

do some wide 17's. 17x8.5 +30 mmmmmmm

hehe... i wish i could afford new rims... but i have some stock 17" mazda3 rims just collecting dust for about a year now under my house... maybe im in the wrong thread... but i'm debating between 215/40/17 or 205/45/17 i used the tire calculator and both come close to the stock 205/50/16 tire size so my speedometer wont be that off

1991cc

01-27-2010, 12:35 PM

That's a 6.75 mm greater tire height. Was it rubbing on the lips in the rear?

sorry for the slow reply, yes it was.

CDNRedP5

02-02-2010, 12:04 AM

18" Drags
This pic was just a test fit.

http://i45.photobucket.com/albums/f73/G_roy/P518s005.jpg

BlackCherry

02-02-2010, 12:37 AM

^^^^ I like

aMaff

02-02-2010, 12:56 AM

do they fit with the car on the ground? There's a pretty significant difference between fitment in clearance with the suspension in full droop, static with the car on the ground, and at full compression.

CDNRedP5

02-02-2010, 01:34 AM

^^^^^ its on the ground. The jack is still there cause it was a test fit.

aMaff

02-02-2010, 01:38 AM

gotcha. Looked like the jack was still supporting the weight.

CDNRedP5

02-02-2010, 01:48 AM

gotcha. Looked like the jack was still supporting the weight.

car isn't lowered yet, so i could see how you could be mistaken.

BlackCherry

02-02-2010, 01:15 PM

car isn't lowered yet, so i could see how you could be mistaken.

It's going to look good if/after you lower it

MonkeyBone

02-02-2010, 09:26 PM

215/40ZR17 is the stock height. Final Word

(canada)

EVADE

02-13-2010, 10:16 PM

do some wide 17's. 17x8.5 +30 mmmmmmm

yup and run some 205/40/17 rubbers

Just to let you know Tom I got the 17s Rota D2 for sale still yet=)

black02p5

02-17-2010, 10:24 PM

Please pm me if you have some nice wheels to fit my 02 p5

SASK P5

02-18-2010, 11:20 PM

I'm lookin to get some wheels soon so i am ready when the snow melts. i have a local shop lookin for me and they sent me some pics and i was wondering what you guys think.
i have an 02 midnight blue pro5 that i just got three months ago it isn't lowered.
the wheels are FRD 168 they are 17x7 and will be in gunmetal grey

http://i795.photobucket.com/albums/yy239/brandonklassen/frd-168.jpg

alexelie

02-19-2010, 11:18 AM

^^not my style. plus the car will look higher without a drop. msp rims look great imo, if you can find a set, they look better than that.

vel

02-19-2010, 03:19 PM

how deep is that lip? like the lip. but i would get it dropped the same time you put the rims on.

SASK P5

02-19-2010, 09:39 PM

^^not my style. plus the car will look higher without a drop. msp rims look great imo, if you can find a set, they look better than that.

I really like the msp rims too but it would be really hard to find some where i live.

how deep is that lip? like the lip. but i would get it dropped the same time you put the rims on.

I'm not sure how deep the lip is i e-mailed him so i may find out monday.

SASK P5

02-20-2010, 03:55 AM

What do you guys think about these? going on my midnight blue p5
17x7 with a 45mm offset (i shouldn't have any problems with a 45mm offset right? i'm not lowered, and would 205/45/17 work or would they rub?)
Enkei Falcon

http://i795.photobucket.com/albums/yy239/brandonklassen/falcon_matte_large.jpg

808MP5

02-20-2010, 04:33 AM

1991cc

02-20-2010, 12:40 PM

^ that wouldn't rub

Flash5

02-20-2010, 01:14 PM

i run a 17x7 with a 42+ offset, no rubbing and im lowered...with rolled fenders though!

SASK P5

02-20-2010, 01:29 PM

i didn't think it would rub but i just wanted to make sure, thanks.

EVADE

02-21-2010, 05:09 AM

check out Rota its the best knock off brand=)

SASK P5

02-26-2010, 11:20 PM

Where is the best place to buy rota wheels from since I live in canada?

Zooms

02-26-2010, 11:23 PM

http://forums.beyond.ca/st/293800/annual-rota-wheel-group-buy/

BlackCherry

03-14-2010, 04:48 AM

Need more pics!

CDNRedP5

03-14-2010, 11:08 AM

225/40/18 18x8 48mm

only seems to rub on the rear drivers side spring perch. Fixed with a sledge hammer :D

http://i45.photobucket.com/albums/f73/G_roy/p518s003.jpg

N2OInferno

03-14-2010, 11:13 AM

Ahh sledgehammers. Is there anything they can't do?

Squeezed some fatter tires onto my old Mustang with some help from a sledge back in the day. :D

BlackCherry

03-17-2010, 12:14 AM

I'm buying 18x7.5 +38 enkei's tomorrow. I'm lowered 1.4 inches all around. I'm ok with a little rub, probably gonna roll the fenders. Should I get a 215/40-18, 215/35-18, or 225/35-18?

FlippyFloppy

03-17-2010, 07:19 PM

Had my Team Dynamics Powder Coated at Suncook River Powder Coating, here is the outcome!

http://i881.photobucket.com/albums/ac17/MazPro502/DSC_0128.jpg
http://i881.photobucket.com/albums/ac17/MazPro502/DSC_0129.jpg
http://i881.photobucket.com/albums/ac17/MazPro502/DSC_0133.jpg

And with the new lugs I just got in!

http://i881.photobucket.com/albums/ac17/MazPro502/DSC_0155.jpg
http://i881.photobucket.com/albums/ac17/MazPro502/DSC_0149.jpg

here they are mounted balanced!

http://i881.photobucket.com/albums/ac17/MazPro502/DSC_0009.jpg
http://i881.photobucket.com/albums/ac17/MazPro502/DSC_0007.jpg

1991cc

03-17-2010, 09:28 PM

nice looks good, the red lugs work. I'm sure you've heard this before but all you need now is a nice drop.

edit: oooh and some rust repair

FlippyFloppy

03-18-2010, 08:05 AM

yup, going in the shop in a couple weeks for that, as for the drop, not happening, not in my neck of new england.

323

03-18-2010, 11:31 AM

u'll still have plenty of clearance after lowering :)

shane02pro5

03-18-2010, 12:01 PM

http://i874.photobucket.com/albums/ab308/shanechapman1/DSCF0450-2.png?t=1268927958

ScratchNSniff

03-18-2010, 02:45 PM

http://i146.photobucket.com/albums/r270/POScort/GIF%20images/Damn.gif

aMaff

03-18-2010, 02:51 PM

LMAO S&S wins this round (rlaugh)

1991cc

03-19-2010, 01:48 AM

beautiful setup Shane

TWISFM

03-19-2010, 02:30 AM

I HAD TO QUOTE THIS AGAIN... funnier everytime i watch it... just watched it for 5min.. great movie

http://i146.photobucket.com/albums/r270/POScort/GIF%20images/Damn.gif

DDDDDDDAAAAAAAYYYUUUUMMMMMM

shane02pro5

03-19-2010, 10:10 AM

Thanks guys :) lol

oem plus

03-19-2010, 05:39 PM

What is your wheel width and offset Shane? Stance is on point.

shane02pro5

03-19-2010, 07:41 PM

Thanks 18x8 +48 rolled fenders 225/35's front 215/35's in the rear. Ground a little clearance on my coilover collars in the front.

SMOKE SHOW

03-19-2010, 09:18 PM

Stance is perfect! More pics!

HKPRO5

03-19-2010, 10:10 PM

Snapped this today.

http://i9.photobucket.com/albums/a82/lancerevil/Nice%20Car%20Pics/DSC_0081.jpg

http://i9.photobucket.com/albums/a82/lancerevil/Nice%20Car%20Pics/DSC_0077.jpg

CalgaryAE92

03-20-2010, 04:53 PM

I'm so glad spring came early in Calgary!

http://i798.photobucket.com/albums/yy261/CalgaryAE92/2010%2003%2020%20TE37s/IMG_3964.jpg

http://i798.photobucket.com/albums/yy261/CalgaryAE92/2010%2003%2020%20TE37s/IMG_3982.jpg

http://i798.photobucket.com/albums/yy261/CalgaryAE92/2010%2003%2020%20TE37s/IMG_3971.jpg

Tokico blues
Racing Beat Springs
TE37s - 18x7.5 +45
Hankook Ventus RS-2s - 215/35/18
blue Rays lug nuts

HKPRO5

03-20-2010, 05:15 PM

I love te37s.

They look good!

How do you like those tires?

CalgaryAE92

03-20-2010, 05:17 PM

Thanks HKPRO5. Dunno about the tires yet. Will find out in about an hour when I leave for work!

roy obanion

03-20-2010, 07:19 PM

I missed my chance on the local RX8 wheels, and they look so good. :'( What size tires, they look a bit small.

oem plus

03-20-2010, 07:32 PM

^whoops. Sorry Roy, I deleted my post and moved it to the "what have you done to your P5 today" thread. The tires look smaller in the pic. My camera just caught the sidewall where it was shiny. They are 205/45/16. I wished they made them in 215/45/16. Boooo!

oem plus

03-20-2010, 07:38 PM

here is a better shot......maybe. haha!

http://i674.photobucket.com/albums/vv106/oem-plus/IMG_1382.jpg

BlackCherry

03-21-2010, 02:32 AM

Looks good oem plus :D how's the difference from the old set up? I'm loving it btw ;D

oem plus

03-21-2010, 01:49 PM

The tokico/espelirs were a smoother ride, but the BC's handle like a mo'fo'. They are stiffer and you can tell, but I LOVE them.

I upgraded tires too. The Bridgestone RE760's are the BEST tires I've had. They don't tram and they fixed the pull I had to the right. I apparently had a bad Yokohama on before. I had them balanced multiple times and was told "that's all we can do".

BlackCherry

03-22-2010, 12:27 AM

Sounds good :) I was actually really surprised with the ride after putting them off. I was expecting something really stiff. I just bought new tires and rims for the car and I got the Yokohama's >_<

TomAss_Z

04-22-2010, 03:59 PM

Ok so I'm having trouble finding out if 18X7.5 with a 45 offset mounted with 225/40/18 will fit my P5, any help please????

alexelie

04-22-2010, 04:30 PM

It will probably rub because of the tires, but it will fit. Just need fender roll i guess.
but dont go with 18inch wheels. Please. Dont. seriously.

go with a 17x7.5 +35.

Some 18 look good. I really like scratch cars but its not always looking good.

EVADE

04-23-2010, 04:07 AM

Ok so I'm having trouble finding out if 18X7.5 with a 45 offset mounted with 225/40/18 will fit my P5, any help please????

go with 215/35/18 or 215/40/18 and your set!

vandenbusschebr

04-24-2010, 03:12 AM

does anyone know if the mazdaspeed mp3 wheels will fit on a p5?

808MP5

04-24-2010, 03:16 AM

It will fit

TomAss_Z

04-29-2010, 04:29 PM

So will a 17 X 7 with a 40 offset on 215/40's fit?

Nobody has either confirmed or denied this, Im ordering my rims TODAY!!! Any info is helpful, thank you

aMaff

04-29-2010, 04:57 PM

40 offset? With a 215? They'll rub. A lot.

TomAss_Z

04-29-2010, 05:00 PM

So how is wheelsnext saying that a 17 X 7 40offset with even a 205/40 gonna fit?

justanothermp5

04-29-2010, 05:00 PM

yea goin to need some fender rolling to get those not to rub
205/40 is smaller, so it wont rub

TomAss_Z

04-29-2010, 05:07 PM

Is it really that big of deal to run a 205 tire compared to a 215?

Ive been reading forum after forum for about the past three days and I cant come up with a good answer

aMaff

04-29-2010, 05:09 PM

Depends. For just driving around? You won't notice a lick of difference

TomAss_Z

04-29-2010, 05:17 PM

Ya, Im only going for looks. No super high perform stuff.

So just to ease my mind, if I go with a 205/40/17 with a 40mm offset I should be fine without rolling fenders?

I am dead set on these wheels and Im buying tomorrow but only if I get a solid answer. I really appreciate your input man, this has been driving me crazy!!!

aMaff

04-29-2010, 05:18 PM

Should be. All 205s are not equal, so I have no way of knowing for sure.

JDM-P5

04-29-2010, 06:02 PM

Fender rolling will be needed Tom.

costcommando

05-12-2010, 01:00 PM

im running 17x7.5 offest of 40 with 215/45/17 and i dont scrape unless i turn at a fast speed or hit a big bump. you will be fine, but i ave my car some camber to shove the tires into the fenders

roy obanion

05-12-2010, 01:32 PM

I thought this a picture thread?

Rockin03mp5

05-12-2010, 01:39 PM

I know there are already a lot of threads with "post your wheels etc." I think we need a thread with only Protege 5 aftermarket wheel pics, so our members can have an idea of what would look good on their P5. So post you pics, include info like offset, tire size, suspension and wheels size. :D

this?

Circuit

05-12-2010, 06:14 PM

It's called wheel fitment because you buy the wheels and make them fit your car. Just roll your fenders and you will be fine

SASK P5

05-21-2010, 08:05 PM

so i am wondering if 205/55r16 will fit with no fender rolling on eibach pro kit springs?

stkmp5

05-21-2010, 09:03 PM

I have 205/50/16 on my p5 and I just dropped mine on BC coilovers on Tuesday and I'm not rubbing. I'm flush in the rear and I have 8mm spacers coming to flush up the front.

ScratchNSniff

05-23-2010, 01:17 AM

http://i243.photobucket.com/albums/ff141/letmeyagrill/11.jpg

http://i829.photobucket.com/albums/zz219/letmeyagrill1/DSC07160.jpg

http://i243.photobucket.com/albums/ff141/letmeyagrill/Protege5%20Progress/DSC06789.jpg

http://i243.photobucket.com/albums/ff141/letmeyagrill/Protege5%20Progress/011.jpg

http://i243.photobucket.com/albums/ff141/letmeyagrill/DSC06205.jpg

http://i243.photobucket.com/albums/ff141/letmeyagrill/DSC06152.jpg

http://i243.photobucket.com/albums/ff141/letmeyagrill/Protege5%20Progress/019.jpg

http://i243.photobucket.com/albums/ff141/letmeyagrill/Protege5%20Progress/msprotege2.jpg

http://i243.photobucket.com/albums/ff141/letmeyagrill/Protege5%20Progress/516.jpg

808MP5

05-23-2010, 01:57 AM

dang RX8 wheels...
ic 18x8 +50 doesn't really clear the fenders... looks sick though...

daisy

05-23-2010, 02:11 AM

ScratchNSniff, your pictures make me miss DG. :(

ScratchNSniff

05-23-2010, 02:16 AM

dang RX8 wheels...
ic 18x8 +50 doesn't really clear the fenders... looks sick though...

Lol...those tires are 245/40/18's...not much problem in the front, rear was a different story...it pulled off paint...

ScratchNSniff, your pictures make me miss DG. :(

DG??? Deals Gap???

808MP5

05-23-2010, 02:21 AM

your fenders are rolled right?

and to keep on subject... stock mazda3 wheels with 25mm spacer
http://tsalvado.mypicgallery.com/808MP5/dsc-0027_large.jpg

ScratchNSniff

05-23-2010, 02:24 AM

Oh yea, and that pic is before I put the 245's on the back as well, then I bent the rims, so that sucked...rears there are 205/35/18's...

daisy

05-23-2010, 05:53 AM

DG??? Deals Gap???Yes, Deals Gap. I'm from North Carolina :D Haven't been up there since...2006. Use to love going there, but then it got waaayyyyy too crowded with too many idiots and too many cops. Cherohala Skyway is much nicer IMO. A lot of roads to head to when it gets to thick at the Dragon. :D

marcs_sp20

05-23-2010, 06:25 AM

http://i293.photobucket.com/albums/mm43/marcs_sp20/SP20%20pics/IMG_2186.jpg

2010 MS3 18x7.5" rims on 215/35/18 rubber, no scrubbing :D

bazooka joe

05-23-2010, 07:07 AM

http://www.mazdas247.com/forum/attachment.php?attachmentid=161647&d=1265382155
http://www.mazdas247.com/forum/attachment.php?attachmentid=136347&d=1219010502
http://www.mazdas247.com/forum/attachment.php?attachmentid=105304&d=1176410388

SASK P5

05-27-2010, 02:44 PM

Would 205/50/17 fit on a p5. They are on mazda3 wheels.

sethro_GT

05-28-2010, 01:13 AM

Don't think so, they are like 1" larger in diameter.

TomAss_Z

05-31-2010, 08:03 PM

Konig Feathers 17 X 7.5 on 215/40's

45 offset, no rubbing whatsoever

Lowered with Eibach prokit

mazdaspeedwagon

05-31-2010, 08:29 PM

Konig Feathers 17 X 7.5 on 215/40's

45 offset, no rubbing whatsoever

Lowered with Eibach prokit

Definately my favorite wheels in the thread.............

SASK P5

05-31-2010, 10:16 PM

what is the thickest spacer you can get without getting extended studs?

justanothermp5

05-31-2010, 10:19 PM

10mm spacer is pushing it, you can barely get the lug to thread on, so i would say 5-7mm

TomAss_Z

06-01-2010, 08:49 PM

Hey bazookaJoe, where did you get those inserts for the little inlets in the front grill?

bazooka joe

06-01-2010, 09:40 PM

traded for them...i think the woman got them from a canadian dealer?

SASK P5

06-02-2010, 11:22 PM

How do you guys think 2004 rsx wheels would look on a p5? I can't find any good pics for a Photoshop.

dxaveP5

06-03-2010, 01:11 AM

it looks ok.
kinda funky
i put my friend's set on my car the other day for kicks.

SASK P5

06-03-2010, 01:17 AM

Do you think it looks better than stock 02 p5 wheels?

sethro_GT

06-04-2010, 03:27 AM

Picked up an 88 626 (4th one Ive owned now) for a steal. Came with 17's on 205/35 yoko ES100's. Going to try them on my yellow P5 for shiggles, hub size allowing. I bet they're heavy, not sure what brand either since there is no label.

http://i701.photobucket.com/albums/ww14/sethro_GT/88%20626/5.jpg

Shi-Fu JaY

06-04-2010, 11:16 AM

SpicyorangeMSP

06-04-2010, 11:39 AM

Picked up an 88 626 (4th one Ive owned now) for a steal. Came with 17's on 205/35 yoko ES100's. Going to try them on my yellow P5 for shiggles, hub size allowing. I bet they're heavy, not sure what brand either since there is no label.

Wow it is turbocharged? I current have a 1991 Hatchback turbo that is waiting for motor rebuild. Sorry off topic.

shane02pro5

06-04-2010, 12:03 PM

Those are MSR 103's made by American Racing and my old wheels

sethro_GT

06-04-2010, 12:34 PM

Awesome thanks, I really like my Mazda 3 16's but I'll put these on anyway to see it. My cars yellow so it may be completely different (naughty).

I wish it was a turbo, I had an mx6 gt that was immaculate. The JDM motor sites have F2T's for cheap and I would love to hold onto it and drop one in. Turbo and some eibachs would make this a badass classic.

TWISFM

06-04-2010, 10:52 PM

17x7.5 215/45 Gram lights 57 Optimise

http://i490.photobucket.com/albums/rr270/twisfm/DSCN0534.jpg

808MP5

06-04-2010, 11:00 PM

17x7.5 215/45 Gram lights 57 Optimise

http://i490.photobucket.com/albums/rr270/twisfm/DSCN0534.jpg

Offset?

TWISFM

06-04-2010, 11:09 PM

+50 soon to be +45

Lewis7789

06-30-2010, 09:10 PM

-Enkei RPF1's. 17" 45offset.
-215/40-17 Khumo Ecsta SPT's.
-Tein S-Tech springs and Tokico Blues.

http://i37.photobucket.com/albums/e98/Lewis7789/Mazda%20P5/0630100758b.jpg

TomAss_Z

08-05-2010, 11:27 PM

Please excuse the dent on the right rear....(dance)

blackdragon11

08-05-2010, 11:53 PM

Rota Slipstreams 17x7.5 +45

http://i17.photobucket.com/albums/b86/speedtrial/SDC10765.jpg
http://i17.photobucket.com/albums/b86/speedtrial/SDC10748.jpg

TWISFM

08-06-2010, 12:11 AM

^ got any down the side pics to see how flush the setup is? Im about to have the same setup.Also what tire size?

blackdragon11

08-06-2010, 12:29 AM

^ got any down the side pics to see how flush the setup is? Im about to have the same setup.Also what tire size?

No I don't, I'll have to take some tomorrow. I got lots of camber on the rear to make it fit and am about to buy some 5mm spacers to put up front. I'm running 215/40 tires

TomAss_Z

08-06-2010, 01:45 AM

Where do you get the spacers? I have the identical size set up you have and Im not liking the way the front wheels line up to the body...

No I don't, I'll have to take some tomorrow. I got lots of camber on the rear to make it fit and am about to buy some 5mm spacers to put up front. I'm running 215/40 tires

blackdragon11

08-06-2010, 06:58 PM

Where do you get the spacers? I have the identical size set up you have and Im not liking the way the front wheels line up to the body...

Im getting the Ichiba 5mm spacers from ebay.

TomAss_Z

08-07-2010, 01:25 AM

Im getting the Ichiba 5mm spacers from ebay.

Let me know how it turns out, or post pics please

blackdragon11

08-07-2010, 07:57 PM

^ got any down the side pics to see how flush the setup is? Im about to have the same setup.Also what tire size?

a couple days late, but here they are. I'm planning on getting 5mm spacers very soon to see how it looks then.

http://i17.photobucket.com/albums/b86/speedtrial/SDC10799.jpg

http://i17.photobucket.com/albums/b86/speedtrial/SDC10800.jpg

sky88s

08-08-2010, 12:41 PM

[QUOTE=blackdragon11;5391838]a couple days late, but here they are. I'm planning on getting 5mm spacers very soon to see how it looks then.

finally on the last page i find my answer..

so ur saying that ur still planning on spacing just to push them out..

what do u think about rims that are 17x8??..urs are 17x7.5 and yet u still have some space to use spacers..u think the 17x8s will have bad rub issues??

blackdragon11

08-08-2010, 04:42 PM

it would rub inside the wheel wheel, get spacers.

ESGT03

08-10-2010, 04:03 PM

(naughty)Just stock RH with updated MSP brakes,(naughty)on my P5 soon to be turbo.(spin)(spin)

Graeter

08-11-2010, 12:33 AM

TWISFM

08-11-2010, 01:19 AM

a couple days late, but here they are. I'm planning on getting 5mm spacers very soon to see how it looks then.

[IM/i17.photobucket.com/albums/b86/speedtrial/SDC10800.jpg[/IMG]

good stuff now lets see about the spacers.. im about to get some 5mm as well

blackdragon11

08-11-2010, 04:36 AM

good stuff now lets see about the spacers.. im about to get some 5mm as well

it will be a month since im going on a few vacations for the next month.

roy obanion

08-11-2010, 01:09 PM

Please excuse the dent on the right rear....(dance)

feathers look good!

CTt3P5

08-11-2010, 01:31 PM

Please excuse the dent on the right rear....(dance)

Looks good....what tires are you running?

Graeter

08-12-2010, 03:12 PM

New Wheels/Tires Fitted Today(lick)

Wheels/Tires:
18x8 +35
225/35/18 S-drives

Rolling/Pulling:
Front - rolled flat and slight pull
Rear - rolled flat and pulled seriously I think an inch or so (which ironically looks somewhat widebody like because of the way the fender is in the rear. Very satisfied!

Alignment: TBD (gonna probably have to do camber bolts all around. More negative in the front which will help turn in and fit a little better, and a little more in the rear for slightly better (peace of mind) fitment.

Suspension:
Tokico Blues
Tein S-techs

Pictures to come by the weekend for you guys!
Here are the pics as promised: (I know I`m no photographer, not trying to be)
http://i304.photobucket.com/albums/nn193/GR8RREX/P1020427.jpg
http://i304.photobucket.com/albums/nn193/GR8RREX/P1020418.jpg
http://i304.photobucket.com/albums/nn193/GR8RREX/P1020423.jpg
http://i304.photobucket.com/albums/nn193/GR8RREX/P1020414.jpg

Things to note:
Both rear fenders had inner rust before trying to roll them which is why they look a little bad towards the back. Spring time I`m gonna fix all that and blend it better before paint. Also want to do retrofits and tint the orange sidemarkers black. Then project DD will be done.

Hank3

08-12-2010, 03:27 PM

The rims look great on your red P5, Graeter!!!

I'm thinking about selling my Matt V Retrofitted HID lights. PM if you're interested.

Graeter

08-13-2010, 12:19 AM

The rims look great on your red P5, Graeter!!!

I'm thinking about selling my Matt V Retrofitted HID lights. PM if you're interested.

Thanks man!

I got a buddy who does great retrofits locally. Me and him will more then likely do them over winter time together

TomAss_Z

08-23-2010, 02:02 PM

feathers look good!

Looks good....what tires are you running?

Thanks!!! Tires are Nankang NS-1's 215/40

They are soft but surprisingly sticky, once they grab... they go. Not so good in the rain but not a bad tire for the price

323

08-23-2010, 04:04 PM

i now officially have p5 wheels so i made it on this thread (lol2)

http://lh4.ggpht.com/_DYLRXxtPeS8/THLRkqzXYmI/AAAAAAAAATs/bY6aT74y0iw/ESwheels2.jpg

alexelie

08-23-2010, 04:12 PM

^^looks really good!

CTt3P5

08-23-2010, 04:18 PM

Thanks!!! Tires are Nankang NS-1's 215/40

They are soft but surprisingly sticky, once they grab... they go. Not so good in the rain but not a bad tire for the price

I see....just ordered tires today.

i now officially have p5 wheels so i made it on this thread (lol2)

lol and that doesn't look bad at all. What is your suspension set-up?

323

08-23-2010, 04:26 PM

mp3 struts + h&r springs

BANANA

08-24-2010, 02:22 AM

Here are my new rims. they are 2009 mazda6 17s
17x7
+55 offset
215/45/17 kumho spts

http://farm5.static.flickr.com/4076/4922161835_a771734c47.jpg (http://www.flickr.com/photos/51005076@N05/4922161835/)

http://farm5.static.flickr.com/4098/4922175145_4384700127.jpg (http://www.flickr.com/photos/51005076@N05/4922175145/)

ce_p5

12-12-2010, 03:16 AM

bump

Rockin03mp5

12-12-2010, 11:22 AM

bump?

roy obanion

12-12-2010, 01:16 PM

oh hai! ...don't think I posted these here:

http://i443.photobucket.com/albums/qq160/roy_obanion/DSC_1516.jpg

StreetPreacher

12-15-2010, 03:38 PM

Well here are my P5 rims. The P5 itself has been up on blocks since I blew the motor last fall...

http://farm3.static.flickr.com/2559/4166526709_a0bf0b49ba_b.jpg

http://farm3.static.flickr.com/2674/4167289208_c1f8bae428_b.jpg

alexelie

12-15-2010, 06:49 PM

my mom got a civic like thta(but blue) and REALLY hate the electronic throttle!! When you shift you have the let the gas go for a moment THEN press the clutch because otherwise the rpm rise. I cannot shift correctly at high rpm to save my life lol. i just dont understand why they did that. horrible thing.

EDIT: but the car drive like a charm :p