Need some help Please

[mazdaspeed75]

This is the most stupid questyion every . Ima rotating my tires and the back ones wnat come off What the hell is the promblem ? Please enlighten me with how to get then off so i dont beat my cars ass!!!!!!!!! And yes the lugnuts are off.

[|3utters]

Just kick them not real hard but with a little force. Kick down at the bottom
edge of the rim a couple of times see if that helps.

[Daniel Young]

Also if you've painted the hubs and brake shoes they paint on the hubs will casue them to stick the first time. But he's right just kick them a little and they will come off.

[laracroft]

Use a mallet on the tires. Mine had the same problem... still does sometimes. I had a problem with them BEFORE I painted my calipers. Must just come tight as hell from factory I guess. They will come off though. I still have a problem every so often getting them off. You just gotta use ALOT of elbow grease. Kicking also helps if you dont have a mallet. lol

[simdrew]

Use a mallet on the tires. Mine had the same problem... still does sometimes. I had a problem with them BEFORE I painted my calipers. Must just come tight as hell from factory I guess. They will come off though. I still have a problem every so often getting them off. You just gotta use ALOT of elbow grease. Kicking also helps if you dont have a mallet. lol

I was rotating the tires on my wife's car and her wheels were being a pain in the ass. I had to sit on the ground and kick either side of the tire, hard and rapidly, for a while... I must have looked like a spaz. Worked though even though it didn't look like it was to begin with.

[laracroft]

I was rotating the tires on my wife's car and her wheels were being a pain in the ass. I had to sit on the ground and kick either side of the tire, hard and rapidly, for a while... I must have looked like a spaz. Worked though even though it didn't look like it was to begin with.
lol We did that too. Took two of us to get the damn things off. I was like WTF... do they SUPERGLUE these wheels on or WHAT???? I figure that I dont need the wheel locks because whoever wants to steal them will have a HELLUVA time getting the damn things off. I'll hear them before they even get finished with the FIRST one.

[Daniel Young]

I'm glad you got them off. About the mallet deal. You might ought to say a rubber mallet. Some people aren't as smart as they should be.

[RyanJayG]

mallets are for girls.... just kick it people!

[Daniel Young]

Youre just mad because you probably don't own a rubber mallet.

[RyanJayG]

nah, I have 3 at work, but still.... when mine got stuck I just kicked.

[mazdaspeed75]

Well thanks guys i was getting pissed ive never had tires take so much pressure to get off . My neighbor came over and was like what are you doing I said i cnat get the tires off. He goes are all the lugnuts off i said yea . So he gave it a try and no luck. So he left and i was lioke there coming off because i had my car all jacked up so i kick the shit out of them and it finally came off , but dam man wtf is up with that . I could have drove with no lugnuts and that is the truth they were on there that bad. Over 1 hour of kicking the shit out of them I though i was going to knock the car of the jack stands ., Great story hahahahhahahahahahhahahhaa (dunno)

[BlkZoomZoom]

they use different types of metals that corrode together nicely....VW's are worse.

[spacemonkey]

rims tend to get stuck on the hubs. Just kick the bottom tire and then kick the top to nug it loose. OR you can use a mallet...the thing is to nug it loose.