keyless entry

[NJP5Guy]

has anyone had to get their keyless entry reprogrammed?

[YelPro03]

has anyone had to get their keyless entry reprogrammed?I didn't get it reporgramed. I programed a new remote control to work with the car using existing codes the car uses. Is that what you meant?

[NJP5Guy]

My keyless entry stopped working on monday. i thought maybe it was the batteries but i tried new ones in each remote but it still didn't work. called mazda and they said they'd have to reprogram the keyless entry. was wondering if anybody had this happen to them.

[YellowMP5]

my remote that i always used stopped working from long distance and often doesn't work when i am right next to the car. i also replaced the battery but it didn't help. do you guys know what's up?

[NJP5Guy]

my remote that i always used stopped working from long distance and often doesn't work when i am right next to the car. i also replaced the battery but it didn't help. do you guys know what's up?

call mazda. i hope when i go they can solve the problem. mine doesn't work close or far. it just up and stopped working(during NJ's big storm no less)...no warning.

[YellowMP5]

hmm, my warranty ended couple of months ago. i wonder what they would charge for that and whether that is the remote problem or the receiver in the car..

[YelPro03]

I'm in NJ also and suffered the same rainstorm and the remote is fine so there's no problems from the car's end. Maybe you have a bad remote controller. Go to Ebay and look for them That's where I picked up an extra remote and programmed it to work with the car. It's less than $15 or $20 from Ebay so it's worth a shot. They do give you programming instructions and it is really easy.

[YelPro03]

Here it is on ebay http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33723&item=7909630640Don't fight over it. They have more so don't let the bidding go out of control.

[Rickman]

I just talked to the guy at my mazda dealership to price remotes (I just bought a P5 and it didnt have any) and they told me they were $60. I said I could get them cheaper online, and he said they'd program them for free.

I've also read that there are writeups online that tell you how to do it.

[Kansei]

call mazda. i hope when i go they can solve the problem. mine doesn't work close or far. it just up and stopped working(during NJ's big storm no less)...no warning.
check the underhood fuses. I have had mine stop working, and the interior light stopped working and also the trip odometer reset when the car was turned off, it was a fuse.

[NJP5Guy]

I will check the fues and see if thats the culprit. thats for the info guys. does the manual tell you how to reset the system if at all possible?

[YelPro03]

Programming it is easy as hell. If I recall correctly here's how you program a new remote:
1. Put the key in the ingition and leave the driver door open and unlocked (you'll have to deal with the key reminder chimes but just deal with it).
2. Turn the key and back 3 times. Don't actually start the car. Just turn it enough to get the lights on the dash going.
3. Now, with the door open, look for the little black switch on the door jam that controls the interior light. After you do the thing with the key, push on that switch 3 times. Then push on the top button on the remote. The car doors should lock.

That's pretty close to the programming procedure but you'll get the exact instructions when you get the remote from the remote guy at ebay. No biggie.

I just talked to the guy at my mazda dealership to price remotes (I just bought a P5 and it didnt have any) and they told me they were $60. I said I could get them cheaper online, and he said they'd program them for free.

I've also read that there are writeups online that tell you how to do it.

[+ friction]

I did this w/a Honda that was preprogrammed for keyless entry but was not on the vehicle I purchased. Just bought the remotes off of eBay and saved an ass of money...the programming was very similar to the above-mentioned steps.

[NJP5Guy]

Programming it is easy as hell. If I recall correctly here's how you program a new remote:
1. Put the key in the ingition and leave the driver door open and unlocked (you'll have to deal with the key reminder chimes but just deal with it).
2. Turn the key and back 3 times. Don't actually start the car. Just turn it enough to get the lights on the dash going.
3. Now, with the door open, look for the little black switch on the door jam that controls the interior light. After you do the thing with the key, push on that switch 3 times. Then push on the top button on the remote. The car doors should lock.

That's pretty close to the programming procedure but you'll get the exact instructions when you get the remote from the remote guy at ebay. No biggie.

i tried it but it was a no go. i will just wait until i get mazda to reprogram it next week.

[FLSilverP5]

It is something like that but you have to click the unlock and then lock button like 3 times too sometimes.

[NJP5Guy]

It is something like that but you have to click the unlock and then lock button like 3 times too sometimes.

seeing as nobody has a definative answer for how to reset the system i will just wait til next week. i don't feel like spending my day trying millions of combinations....i will just have to open and lock the car old school style(never thought i'd become so dependant on this keyless entry)

[Rickman]

I was just excited to find out (after I bought the car) that I have it. because my car didnt come with any remotes.

[Rickman]

I got my remotes yesterday, they rock. Dead Easy to program. Instructions above should work fine.

Oh, and I got two for under $25 shipped.

[NJP5Guy]

I was able to reprogram my remotes but the correct way to do it was not listed in this thread. once you do the on and off you must remove the key from the ignition(that is the step that was left out)

[YellowMP5]

so you reprogrammed the original remotes and they work fine now? i gotta go try this on my remote.

[NJP5Guy]

yeah back to normal.

[YelPro03]

I think in the begining I stated that the instructions might not be complete and that you should follow the instructions that come with the new remote. I put what I could remember of the instructions there just to give you an idea of how easy it is to program because I sense some fear of programming and letting the dealer do it for a lot more money. Sorry if I caused any confusion.
I was able to reprogram my remotes but the correct way to do it was not listed in this thread. once you do the on and off you must remove the key from the ignition(that is the step that was left out)

[NJP5Guy]

hey no worries man. i appreciate the info. i went to one dealer while shopping with a friend(he bought a 2004 mazda3 sedan) and they wanted to charge me $90. i said hells no thats a warranty issue though they did'nt have the time to do it then. i used my same keys and did it myself when i found the other thread w/ instructions...just glad it worked. thanks though

[PasteyP5]

Does anyone know if you can reprogram the remote buttons, such as the panic button, to do something like put the windows up and down?

[NJP5Guy]

the windows and locks are independent systems as far as i know. you might be able to integrate the two systems but i have no idea how you'd do it. might want to find someone who knows electric systems very well.

[p5tom]

I got my remotes yesterday, they rock. Dead Easy to program. Instructions above should work fine.

Oh, and I got two for under $25 shipped.

Where u get them????????????????????????
(crazy)

[JonKlsn]

These should be the correct instructions...

http://www.mazsports.com/phpBB2/viewtopic.php?t=653

[rjmhotrod]

yelpro03, thanks for the link. I needed to pick up an extra remote for my wife and the dealer wanted nearly $100. Got one on ebay (from remotes2003) - with shipping was about $23. Easy to program. Thanks big time. (thumb)

[Rickman]

Where u get them????????????????????????
(crazy)
I got mine on ebay from member: remotesuperstore.

Basically I just searched for "Protege Remotes" and he had the best deal, and I got them in less than a week from the time I ordered them.

OH, here's the auction I won if it helps: |CLICK HERE| (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7909608010&rd=1&sspagename=STRK%3AMEWN%3AIT)

[p5tom]

The link no longer works...

Does anyone know if you can reprogram the remote buttons, such as the panic button, to do something like put the windows up and down?

[Jeph]

I have my 2 old remotes if anyone wants them. I only used them for about a month before i got a new alarm, and new remotes.

[Rickman]

http://spazchicken.com/Mazda/remote_programming_instructions.jpg

[russr]

Do you guys know if a transmitter from later years like 2002 or 2003 can be used on a Protege from 2000?

[Cloudland]

Do you guys know if a transmitter from later years like 2002 or 2003 can be used on a Protege from 2000?
similar question - will american remote works on an overseas 2001 SP20 (P5)? we don't have the panic button on the remote. ;)

[DeadGeneration]

original instructions in this thread worked for me

[93Miata]

I was looking for replacement keyless entry remotes not too long ago and I found a site that had them really cheap for my 03 MSP and 98 Millenia.

I had them delivered in less than a week and the programming instructions only took maybe 10 seconds?

Anyways, here's a link to the site:

Https://www.ThePartsYouNeed.com

Just click the Mazda category, or type your model in their search box.

[Kansei]

I was looking for replacement keyless entry remotes not too long ago and I found a site that had them really cheap for my 03 MSP and 98 Millenia.

I had them delivered in less than a week and the programming instructions only took maybe 10 seconds?

Anyways, here's a link to the site:

Https://www.ThePartsYouNeed.com

Just click the Mazda category, or type your model in their search box.


Thanks for the link! That site has everything. I wish they had the JDM remotes I've seen for our car (the key types ones).

[Nomad]

I just bought a spare remote off ebay for like $5 and used the list posted above to program it. I also added the factory mazda alarm and it was pretty easy and straightforward.