FS: a whole bunch of stuff

[dragonballspeed]

Hey guys and gals whats up? I have a whole bunch of parts that have come off my MSP, some stereo stuff and a few other misc things that I need to get rid of before I make my trip to NY to start over. I am currently in TX, so for you local guys this might be helpful, but I would be willing to ship stuff as well. In the past I have tried to sell a couple of these things but the people flaked. So if these things I have listed here are something you think you may really want then let me know. If not, please dont give me the run around because I will be leaving very soon. Also I have pictures of everthing for sale, but due to how much there is I will spare the board of that overload. Thanks and have a great day.

Autometer Air/Fuel & Boost gauge, ultra lite series; $25 ea.
Gaugeworks dual pillar already painted and mounted; $25
MSP downpipe back exaust: rear section or whole thing doesnt matter w/3k on it; $100
MSP spring & strut kit with everthing w/6k on it; $300 kit or $200 struts & $100 springs
Protege front and rear seat belt; $10 ea.
Protege trunk lining; $20
MSP sub box w/sub and mounting brackets; $150
Zinik 18 x 7.5 w/42 mm offset 5 x 114 or 5 x 120 bolt pattern, 2 are in great condition, 2 are slightly bent but fixable; $100 great for tearing up at the track for you autoxer's
http://www.msprotege.com/members/dragonballspeed/wheels/zinik%20wheel.JPGhttp://www.msprotege.com/members/dragonballspeed/wheels/zinik%20wheels1.JPG
Coustic XM-3e electronic crossover with remote bass control; $20
http://www.msprotege.com/members/dragonballspeed/stereo/crossover1.JPG
Monster Cable M power positive & negative battery terminals, 2 sets; $30 ea. terminal
Monster Cable M power High Amp ANL inline fuse; $30
Monster Cable M power Powerfuse distribution; $ 50
Monster Cable Competition Powersplit; $25
Monster Cable standard power cable:
1/0 awg blue 10'; $3 a ft
4 ga blue 22', 6 x 2', & 5'; $1 ft
1/0 awg sliver 5' & 2' with ground connector; $3 ft
4 ga silver 35' & 7' x 2
; $1 ft
18 ga remote turn on wire 20'; $2
16 ga speaker wire 20'; $2
All of the monster cable products are brand new and were going to be used in a hardcore setup, but due to needs of the actuall project most was not used, just taken out of packaging. All prices are at least half the retail, which I paid, and my loss is your gain. If purchased all together I would consider a package price. For any questions about monster products or original retail prices, please refer to www.monstercable.com (http://www.monstercable.com/)

Futaba Magnum sport 2 ch rc remote; $10
http://www.msprotege.com/members/dragonballspeed/rc%20parts/gun%20rc%20remote1.JPG
Cox/Sanwa Cadet 2 ch rc remote; $10
http://www.msprotege.com/members/dragonballspeed/rc%20parts/rc%20remote1.JPG
Futaba MC 210CB electronic speed control w/reverse; $10
http://www.msprotege.com/members/dragonballspeed/rc%20parts/speed%20control1.JPG

And finally, I think all of the prices I have listed are fare, but if you see something you want and think the price is a little high, let me know and we can work something out. Thank all of you who take the time to look this list over.

[flat_black]

G'dammit... Rr... I might be interested in the struts and springs, but I'll let you know after I register my cars. =/

[ddogg777]

How many duplicate posts are there of this stuff?

[PMPJUICE25]

How Much Do You Want For The Rims? Will They Fit My P5. ARE THEY GOOD ENOUGH TO DRIVE ON? SEND MORE PICS OF THEM.

[dragonballspeed]

How many duplicate posts are there of this stuff?
I put this thread in 3 different places to make sure that all would be able to see it.

[dragonballspeed]

How Much Do You Want For The Rims? Will They Fit My P5. ARE THEY GOOD ENOUGH TO DRIVE ON? SEND MORE PICS OF THEM.

I said $100 for the rims and I dont know weather or not they will fit a P5. There is one rim that may need to be repaired before you can use it, but I have never had tires on them either. I purchased them from a friend and thought of using them for racing but then my car got shifted to an all out show car, no autocrossing for me.

[ddogg777]

I put this thread in 3 different places to make sure that all would be able to see it.
Lol, don't do that. The moderators are gonna get ticked when they find these.

[tracknfield423]

i'll take the boost gauge its an autometer ultra lite correct?? just let me know if it is vac too and what psi it goes up to. i am interested in the rims aswell but i would like to know for sure if one needs to be repaired and how much it will costalso will they fit the stock potenzas on the MSP? the downpipe back exhaust, is it possible to purchase just the downpipe?? if so how much and what brand is it?? please pm me with pics of the gauge and rims asap with shipping cost to 08755 (toms river, nj) thnx a bunch. . . .chris

[dragonballspeed]

For those of you who keep asking about the rims, I will post all the pics I have. As for the struts and the gauges, I am almost certain they are spoken for as well as the seat belts. Thanks for all of your interest.

http://www.msprotege.com/members/dragonballspeed/wheels/zinik%20wheel.JPGhttp://www.msprotege.com/members/dragonballspeed/wheels/zinik%20wheel%20(info).JPGhttp://www.msprotege.com/members/dragonballspeed/wheels/zinik%20wheels1.JPG
http://www.msprotege.com/members/dragonballspeed/wheels/zinik%20wheels2.JPGhttp://www.msprotege.com/members/dragonballspeed/wheels/zinik%20wheel%20(good1).JPGhttp://www.msprotege.com/members/dragonballspeed/wheels/zinik%20wheel%20(good2).JPG
http://www.msprotege.com/members/dragonballspeed/wheels/zinik%20wheel%20(barely%20bent1).JPGhttp://www.msprotege.com/members/dragonballspeed/wheels/zinik%20wheel%20(barely%20bent2).JPGhttp://www.msprotege.com/members/dragonballspeed/wheels/zinik%20wheel%20(fixable%20bent1).JPG
http://www.msprotege.com/members/dragonballspeed/wheels/zinik%20wheel%20(fixable%20bent2).JPGhttp://www.msprotege.com/members/dragonballspeed/wheels/zinik%20wheel%20(fixable%20bent3).JPG

I know the last wheel looks a little rough, but if you know a good wheel repair guy that should be no problem to fix. I had a truck with a rim worse than that and was able to get it completely straightened. The exhaust is a stock MSP exhaust

[memo79]

2 more things: how much does each rim weigh? and what's your zip code?

[jaytee]

how much do you think it would cost to get the 2 rims fixed?

[flat_black]

Could you post some pics of the struts and springs for me, Dragonballspeed? I'd like to see 'em, and may be able to give you answer sooner than later. Thanks!

[dragonballspeed]

The rims way around 18 to 20 lbs ea, im in the Dallas TX area, and around here it can cost anywhere between $75-125 to fix a rim. As for the spring and strut kit, the struts are spoken for, but the springs are still available.

http://www.msprotege.com/members/dragonballspeed/parts/mazdaspeed%20spring%20kit3.JPGhttp://www.msprotege.com/members/dragonballspeed/parts/mazdaspeed%20spring%20kit7.JPG

[flat_black]

Daaaaamnit. >.< Alright, then. I'll grab the springs from you. Heh. One step, anyway. 100$ shipped?

[TXMazdaSpeeder]

im coming down to dallas this weekend, if yoou'll PM me your cell number i'll come buy and look at the rims if u dont mind.

i'd also like to get the gauge pod if its not spoken for

[flat_black]

Ah, damn. =P I'm going to have to skip on the springs... Found out they don't exactly work on the Protege5, at least not with consistant results. Ahh, well.

[TXMazdaSpeeder]

Ah, damn. =P I'm going to have to skip on the springs... Found out they don't exactly work on the Protege5, at least not with consistant results. Ahh, well.
how u figure?

[flat_black]

Well, I've been poking around, and about a quarter of the people are saying they cause problems, another quarter are saying they don't, and half are undecided. Hehe. I'm still looking into it, but from what I've been reading, I might need the perches (struts) to match. Gah. I wish I could find a straight reference to it.

[TXMazdaSpeeder]

i really cant see why it would cause a problem if u got the matching strut perchs, i mean i wouldnt think mazda would put a part on one of there cars that they had to mod the car to make it work.

[flat_black]

Well, if I could get the matching strut perches for it, I'd do that, but I assumed it was just the springs. Hehe

[dragonballspeed]

the only problem I could see with running these struts on a P5 would be the additional weight of the wagon style. But all in all the sedan and the wagon are pretty close in weight. The springs, rims, and all the monster stuff are still available for anyone who wants its.

[Mr. Win]

i want the struts if anything falls through

[dragonballspeed]

struts are sold

[NYCZMP3]

AY DRAGON...whtu type of suspension u runnin??

[wannabe]

i see the endlinks in that pic...how much you want for them?

[TXMazdaSpeeder]

i would like to call dibs on the rims if possible

[ELEmental59437]

WTF? Who moved this into the MP3 section? Wasnt in in FS before?

[leebanger]

dragonballspeed, you have a pm

[Akaveli]

aww man the are struts sold.

[leebanger]

I'll call you tomorrow. at a business meeting today. what's the best time?

Lee