PDA

View Full Version : Bolt Pattern for the P5?


Nutari
04-11-2004, 03:26 AM
Anyone know the exact measurements?

2002 Protege 5
Dexter
04-11-2004, 03:33 AM
5x114.3
Nutari
04-11-2004, 03:52 AM
5x114.3
.3? heh
has to be that exact?


Thanks btw.
Dexter
04-11-2004, 03:55 AM
.
.3 for a reason, I'm guessing. Otherwise just make it 114. (dunno)
pr5owner
04-12-2004, 02:48 AM
its either 5x100 or 5x114.3 and the p5 is 114.3 alot of rims are dual drills so it doesnt really matter,
Togan
04-12-2004, 03:54 AM
the dealer guy said 5x100
PRO 5
04-12-2004, 05:19 AM
the dealer guy said 5x100
Don't belive your dealer guy, he's an idiot! It's 5x114.3 (spin)

Dave
YelPro03
04-12-2004, 08:12 AM
.3? heh
has to be that exact?


Thanks btw.You're not drilling the holes yourself so don't be too concerned about being exact. They only come in 114.3. You can't get 114.2 or 114.4 by mistake. Even when they advertise 114, they really mean 114.3.
gino
04-13-2004, 01:32 PM
You're not drilling the holes yourself so don't be too concerned about being exact. They only come in 114.3. You can't get 114.2 or 114.4 by mistake. Even when they advertise 114, they really mean 114.3.
You'll also find that 5x4.5" works. One inch=25.4mm. :)
KYMP5
04-13-2004, 01:33 PM
fyi, thats close enought that 5x4.5" will work in case you find any wheels in US measurements
mountjonas
04-13-2004, 01:36 PM
the dealer guy said 5x100

my dealer told me that the clutch chatter tsb didn't exist.