Which Speed signal ECU PIN to use?

[tekkie]

I am trying to hookup my Apexi AVCR, it says to use SPEED SIGNAL. So I look and I can find 3 things that it could be

Pin 28 = Vehicle Speed output, used for Speedometer
Pin 48 = Engine Speed, used for Tach
Pin 58 = Vehicle Speed, used for Speedometer & VSS

I am guessing that I should be using the 28 one? I did a search and the only thing I can find is pics of a wire under the hood but it does not relate back to the ECU from what I can find :(

[igdrasil]

engine speed...

anyone?

[Patmine]

I am trying to hookup my Apexi AVCR, it says to use SPEED SIGNAL. So I look and I can find 3 things that it could be

Pin 28 = Vehicle Speed output, used for Speedometer
Pin 48 = Engine Speed, used for Tach
Pin 58 = Vehicle Speed, used for Speedometer & VSS

I am guessing that I should be using the 28 one? I did a search and the only thing I can find is pics of a wire under the hood but it does not relate back to the ECU from what I can find :(

The vss wire is what you are looking for. Do you have a digital multimeter? If so then you can easily verify the wire that you are looking for.

[Matthew]

pin 58 its green and red.

[tekkie]

thanks for the replies guys, I am going to create a post that has this listed so knobs like me wont ask these questions ;)

[Matthew]

dont worry about doing that there is a sticky in the elec section for this already.

[tekkie]

I just looked again and I dont see it anywhere, I did searches and did not come up with anything. Not saying its not true because I know that you have been here for a long time so I am sure its there somewhere I just dont see it :(

[Matthew]

http://www.msprotege.com/vbb300/showthread.php?t=9965

you can trust me i just hooked up my greddy turbo timer the day before last. its green and red though i hear it can be orange and red.

[tekkie]

I trust ya ;)

lol now I see why I did not find it, I saw the heading but did not suspect that would have anything to do with it

thanks Matt

[Matthew]

no prob

[toronto]

does anyone know if the tac wire is in the same location on 00 pro? thanks