Plugs and wires

[MazdaSpeeder00]

I would have posted in the one thread before but its in one of the locked folders. Im going to get new extended reach plugs tomorrow but i wanna know if its absolutely necessary to get new wires? And do they come pre gapped?

[KyRaceFan]

no you dont need new wires.
All plugs are "pregapped" but you need to check the gap anyways to make sure its in spec. .028 - .038 is what you want.

I use .032.

[Daniel Young]

who even makes aftermarket spark plug wires for the MSP? And are they worth a shit?

[KyRaceFan]

Any 2.0L protege plug wires should work...
I believe www.apexr1.com (http://www.apexr1.com) sells a set of magnecors.

And honestly, these are new ignitions, you shouldnt need new wires for a while.

[Daniel Young]

I was really wanting to know what you just told. I figured they would just wasn't sure. Thanks, I appreciate it.

[MazdaSpeeder00]

no you dont need new wires.
All plugs are "pregapped" but you need to check the gap anyways to make sure its in spec. .028 - .038 is what you want.

I use .032.
thanks......who makes the best extended reach plug? Does NGK make them?

[MazdaSpeeder00]

Well i bought bosch platinum 2's today. Anyone have any idea on how they perform? Im getting them installed tomorrow morning.

[MikeyG_U2]

I found most plugs come with a gap of 1.1mm. The MSP requires .7 to .8mm It's tough to find a plug that is pre-gapped correctly for us.

I posted some info here:
http://www.msprotege.com/forum/showpost.php?p=836836&postcount=71

[MazdaSpeeder00]

Ok, what is up with the two coils? Ive never seen 2 before. Secondly im assuming that you have to remove them to get the other 2 plugs in.

[Stormtrooper77]

The MSP wires are so thin! They look like they are only 4mm. Anyone know as to why? I mean, my old Summit had larger wires.

[BMC]

These work too.
http://racingbeat.com/resultset.asp?PartNumber=51007