FMIC TODAY at 12

[djtest]

So remember me ? I am the guy who posted all those wrecked picts with my vin # and my lisence plate# you guys yelled at me........
I am over it, today I will be dropping of my msp to get its 2nd mod A FMIC !!!!!!! I am pumped, the whole job is totally custom cause the shop I go to said the pictures of kits I showed em did'nt seem like they pipes "flo " as best they can. all kinds a bends and what not. SOOOOOOOO I wil post picts asap I should see it in three/ four days. is there anything I should say to the shop or request? I doubt seeing any crazy gains but they car will DEFF run like a champ. (outie) ps turbo timer still not behaving

[Gbourdon]

(rockon) Keep us posted and take pics. What are you doing for an intake?

[girth]

Yup, keep us updated. What kind of core are you going with? How much is it expected to cost with labor and everything (if you don't mind saying)?

Good luck!

[spacemonkey]

sweet...I know what you mean. There so little space to work with...I dont really like the way many FMIC flow too. but I guess it saves money cuz they can do a "stage 1" pipes for side mont and "stage 2" upgrading it to FMIC. Im more of a traditional guy...with the pipes coming in from each side...although it might not matter (I dont know). I would be happy as long as I got a good lookin and useful FMIC. Thats why I was so excited to hear greddy doing a FMIC for the MSP...but got pushed back or canceled (I dont know).

Keep us updated and

(pics)

[low_psi]

sounds cool. make sure they make the cold charge pipe going from the IC to the throttle body is two pieces w/ a silicon connector in between to allow for engine flex.

[warrier04]

i hear many people talking about getting a custom fmic, but what kind of local shops do that type of work? would a place that does muffler/exhaust work be able to fab it up for me, or is another type of business necessary?

[djtest]

the core is spearco it is 26'x7x2 I think nort the larget but good for 500whp which i'll never hit. They shop isdoing it all for just over 900 $ plus air filter and pod with boost gauge. 2 DAYS !!! (freak)

[Devilspawn]

the core is spearco it is 26'x7x2 I think nort the larget but good for 500whp which i'll never hit. They shop isdoing it all for just over 900 $ plus air filter and pod with boost gauge. 2 DAYS !!! (freak)

congrats... and what shop in MD is doing this? I could be interested if they do a good job....

[djtest]

ok ok ok if you go there you might get some discounts if you mention me.
My name is Dave Testerman I know "testicles" you can laugh all you want buddy

they are in cockeysville no joke really testicles says it is in cockeysville
near where the MD State fair is on york rd. I will post picts then you can decide if you like what they have done. They also have a cool dyno there that mouonts to your HUB NO SLIPPAGE from the tires! way more accurate.
www.agileauto.com (spin) (spin) (spin) (spin)

[Devilspawn]

wait... did you go to the agile dyno meet? We(some of us here) have been to agile b4 and got dynos done already. Mike and the crew are awesome! They are making a custom fmic for you. SWEET!...let me know how it goes....

btw, I think they should be able to fix your tt problem...

[Gbourdon]

ok ok ok if you go there you might get some discounts if you mention me.
My name is Dave Testerman I know "testicles" you can laugh all you want buddy

they are in cockeysville no joke really testicles says it is in cockeysville
near where the MD State fair is on york rd. I will post picts then you can decide if you like what they have done. They also have a cool dyno there that mouonts to your HUB NO SLIPPAGE from the tires! way more accurate.
www.agileauto.com (spin) (spin) (spin) (spin)

(hah) Testicles, cockeysville, mounts to your hub (lol2)

[djtest]

NO I missed the meet I was in the hospital I think so they couldn't tell me. it is very close to my house I wont miss another !

[505zoom]

...is there anything I should say to the shop or request?...

Kill the turkey while you're at it. Have them weld on a flange for the stock BPV and recirculate it, then have them weld on a flange for an aftermarket BOV of your choice and run it open-vent.

[vIZIon4]

im in md also, i might be interested after seeing some pics and more info...:-)

[djtest]

bpv?? I am guessing Bypass valve ?

[505zoom]

bpv?? I am guessing Bypass valve ?

You got it.

[Devilspawn]

NO I missed the meet I was in the hospital I think so they couldn't tell me. it is very close to my house I wont miss another !

ok, now I remember you saying you had to be in the hopsital, I hope all is ok, and I hope you can make it to the NJ meet. And keep us all updated on the FMIC, please! cya around man...

[Devilspawn]

any updates???

[djtest]

I am picking it up tommorrow at 10 i'll take picts when I get it home. I have the turbosmart bov that recirculate so i have no turkey they said on the test drive there was no stumbling which is great ......... after I drive it i'll et you know ! tommorrow !!! woo hooo (band2)

[jflo]

cool sauce man...post up pics when finished

[Devilspawn]

I am picking it up tommorrow at 10 i'll take picts when I get it home. I have the turbosmart bov that recirculate so i have no turkey they said on the test drive there was no stumbling which is great ......... after I drive it i'll et you know ! tommorrow !!! woo hooo (band2)

sweet! can't wait....

[hawaiian_msp]

update??

[djtest]

ok here it is..... AND HOLY CRAP it pulls so hard all the way through every gear......... DANGERouS I am very happy with the results. The BOV is more of a cough or dump then a pssssht but no turkey ! here we go :) :) :)

[Rod_Maz]

Trippant ben raide!!

Oupss i lost it for a second there hehehe ... WOW man looks really really nice :)

[computerGeek]

Why aren't people going with a right side dual in/outlet designed FMIC. Look at all that extra piping to the left. that 4 times as long as the original design.

I am getting a custom IC made as we speak that has this and the piping will be short straight and direct. Why am i the only one that has thought to do this?

[Emode]

you arent

[Demonic-Speed]

I will post pics after I get mine done, my shop is going to try and do the dual driver side inlet/outlet. But djtest, how much did you pay? It really looks like there is way to much pipe there. And that filter looks really tiny. But the front looks sweet:)

[djtest]

I spent alot, the fmic and custom work was fiine near 1,000 but I got a boost gauge and pillar mount. some other goodies too. The reason I didn't go with same inlet outlet side was because I personally don't like them. I can't picture in my heade how the air can flow thru that without a 90 degree turn. I chose this one because I like a traditional style along with the fact that it completley recircs without any stock parts. I don't mind the extra pipe there aren't any nesty bends in it and it is all huge ! the air filter was the one that would fit in where we discussed running the pipe. I don't think it is any less efficient than those long ones because it's circumference (sp) is nearly twice as large .I am also a custom kinda guy I like the prototypes that no one else has. just me tho, and if the car didn't run so damn good i might think about the other type of intercooler but for now I love this mod !!!!!!! up next fuel management and exhaust, and DP can anyone suggest where to go for a not too loud exhaust cat back for under 700 ? I will search soon but anyways happy easter. oh yea the turbosmart bov settings ? it is easy to adjust you just spin it but I don't know where it should be ? more towards hard or soft ?? I have messed a little but don't wanna mess anything up sso if you guys can point at me then laugh, then tell me i'll be happy (dunno) (band2) allright DEMON I hope I answered all your questions later

[srtchick]

nice tubing ! ;)