View Full Version : White autoexe grill
I_Vtec
07-16-2002, 05:11 PM
Just wanted to let anyone with a white P5 know about the autoexe grill. You may have heard that it is white from the company. It is pretty close to the white of the car, but not the same. I just got mine and will have to get it painted.
Pro5OnSpeed
07-25-2002, 12:25 PM
i have a black MP5 and i took off both my top and bottom grille and painted them white. they look hella cool! since you have a white car, i would get them done in a different color or leave it black... thats just my humble opinion!
I_Vtec
07-25-2002, 12:32 PM
Post some pics of your grill.
jdm_mp5
08-02-2002, 02:21 AM
hey pro5man, where did you get your grill from and how much did it cost you?
I_Vtec
08-02-2002, 10:35 AM
grill (http://www.takaira.co.jp)
$290 to my door.
Pro5OnSpeed
08-04-2002, 01:55 AM
i finally have my pic of my white grill that i said i would post let me know what you think!
jdm_mp5
08-05-2002, 01:00 AM
i thought the autoexe grill cleared the mazda emblem?
I_Vtec
08-05-2002, 11:21 AM
That's not an autoexe grill. It's the factory grill painted white on jdm_mp5's car.
My car has an autoexe grill on it, but just not in that picture. I've got an autoexe lip I need to get painted and put on the car. After that is done I've got to find a buddy with a digital camera to get those pics up.
jdm_mp5
08-06-2002, 01:29 AM
oh phew! okay, i was about to say. it was strange how the picture of your car is white and the one with the grill was black. thanks for clearing that up! and get that picture up asap!!!
PM_OTT_MP3
08-08-2002, 09:30 AM
Hey Pro5OnSpeed...
Any pics of your stock grill painted white??? I'm thinking of doing the same thing for my MP3.
I_Vtec
08-08-2002, 10:53 AM
try the post about 4 above yours
Pro5OnSpeed
08-09-2002, 11:47 AM
i did post the picture above, but here is an extra one:
http://www.mazdamp3.com/members/Pro5OnSpeed/mypro5.bmp
123zoom
05-03-2003, 01:30 PM
Pro5OnSpeed, did u remove teh grilles to do that? if so, can u explain teh bottom grille removal
Pro5OnSpeed
05-03-2003, 10:22 PM
taking off the bottom grille is a kinda pain in the ass, but all it consists of trying to get underneath so you can see both side notches.
there are four or of them. you need to get a hand held flathead screw driver in order to push down on the tabs. but before you do that, you will see, i think, it is four pieces of plastic that run vertically in the "mouth" that the grille is attached to. you have to kinda push them forward. i took out both of them so i could paint them. make sure you prime them first, and clear coat them. make sure you get everything, put on several coats. i hope this helps.
Powered by vBulletin® Version 4.1.7 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.