upper IC pipe removal???

[SaaBaaDoo]

What's the best way to get the upper IC pipe off? I can pull all day on that damn thing and can get it to move about a quarter of an inch...

Any suggestions would definitely be helpful!

[lamp3]

pull harder ;), and wiggle it. Try not to put to much stress on the flex joints if you can help it.

[ylmazdaspeed]

as suggested by othe rmembers on the board, use a hari dryer to heatup where the pipe is connected. I konw i had a hell of a time getting my stock IC pipes off. Have fun tugging.

[jersey_emt]

Yes use a hairdryer. There is a piece of rubber between the pipe and the intercooler, it's a bitch to get off. Also try twisting when you are pulling.

[SaaBaaDoo]

Do I have to reverse the process to get it back on, or should it go on easier than it comes off?

[www.03msp.com]

heat gun, low setting, around the circle of base for 10 seconds, comes right off

[t3ase]

Thread moved to MSP Forced Induction.