Judging interest for hardpipes

[BinaryRotary]

I'm a machinist by trade and was wondering how you guys would feel about some custom hardpipes.

Right now I'm making a set for myself. It uses .20 standard thickness, 2" aluminized pipe. The pipe will come with Baker Precision high-temp silicone flex sections so the stock intercooler pipes don't break under engine flex. It also will include a 2" to 2.5" reducer for attaching to the throttle body along with all clamps.

I will have the pipes either powder coated in Black or Silver. The CAI will be made of the same materials as the hardpipes and come with a cone filter.

These hardpipes will be made to order, using either an aftermarket BOV flange or the standard OEM BPV.

Most hardpipes sell for $400 and most CAI's sell for $200. Thats $600 for a set of hardpipes and a CAI. I'm planning on selling BOTH the hardpipes and the CAI for $475 SHIPPED. Or you can just order the Hardpipes for $300 and the CAI for $175.

Please just post if you would be interested or not, if they were available.

Thanks Guys,

Binary

[b00sted]

do yours and take some pics

[EvilMSP]

yeah id be interested if they were that cheap (only interested inhard pipes)

[pip7441622]

100% sure I would buy just the hardpipes for $300. I already made myself a CAI, so I just need the remaining two sections of pipe. Would that $300 include a flange for a certain POV welded on, if not how much extra?

[03BlkMicaSPD]

Interested, start yours and show progress...

[Hercdriver]

I'm interested, but I need to do a bit more research on any warranty issues, BOV vs. BPV, and "Turkey" increase. I know there is a ton of info on this stuff already so I'll just check the posts.

[jersey_emt]

For $300 I'd be in.

[MSBlueP]

For $300 hardpipes.. hellz yea i'm interested! do yours and promote! ;) hehe

[BinaryRotary]

100% sure I would buy just the hardpipes for $300. I already made myself a CAI, so I just need the remaining two sections of pipe. Would that $300 include a flange for a certain POV welded on, if not how much extra?


Sure, I'd have to check on the flange for your certain application, but I think I can do it.

[BinaryRotary]

Interested, start yours and show progress...

Will do, I'll be updating.

[03MSPRO]

I am in if the quality and fitting is excellent.

[DiscreetSpeed]

I am in if the quality and fitting is excellent.
(pow) dsfsjkgselkj szdhflkd;oaui

[BinaryRotary]

(pow) dsfsjkgselkj szdhflkd;oaui

Well, I've been a machinist for 17 years, I assure you the quality will be excellent.

[[syko.xero]]

i am interested

[Hypnotized]

I would be interested in a set of hard pipes for 300.00. Will you be trying the BPV/BOV setup like 505 did to kill the turkey? Would this kit fit alright with an injen intake?

[b00sted]

can you do one with a greddy type s flange?

[BinaryRotary]

can you do one with a greddy type s flange?


Yup, I'm gonna get prices on flange and then we'll be set.

[mSHOCKERp]

Yup, I'm gonna get prices on flange and then we'll be set.

If I'm going to be running the Forge dual piston valve will this work with the hard pipes that use the stock BPV, since the Forge is a direct replacement? If so I'll want to pick up a set of the $300 hardpipes when taxes roll around prob.

Mike

[BinaryRotary]

If I'm going to be running the Forge dual piston valve will this work with the hard pipes that use the stock BPV, since the Forge is a direct replacement? If so I'll want to pick up a set of the $300 hardpipes when taxes roll around prob.

Mike

You betcha, anything that is a direct OEM replacement will work.

[BinaryRotary]

I would be interested in a set of hard pipes for 300.00. Will you be trying the BPV/BOV setup like 505 did to kill the turkey? Would this kit fit alright with an injen intake?

Thats one thing I am working on. It really isnt cost effective to make 2 different sets of hardpipes, one for people with the injen, and one for people without, but I'll see what I can do.

[Dr.Sound]

yeah man, definetly look into making it work with injen CAI
i will be one of the first ones to get it if it fits with injen.....

i would also like a dual setup if possible (flange for BOV and a nipple to rout our stock BPV)

THANKS BINARY!!!

[yellerandahalf]

Would it be possible to make them without the powder-coating? Aluminumized pipes shouldn't rust, even without the coating, right? I have about 250 to spend, so if they weren't powedercoated, would that do the trick?

[arlsmazdaspeed]

i'm very interested in thosre pipes if they cost only 300. keep me updated..

[BinaryRotary]

Would it be possible to make them without the powder-coating? Aluminumized pipes shouldn't rust, even without the coating, right? I have about 250 to spend, so if they weren't powedercoated, would that do the trick?


I'm sure I can do that, these pipes will be made to order, application specific. This will be a custom job. Aluminized pipes can still rust, but it takes alot for them to do that.

[BinaryRotary]

yeah man, definetly look into making it work with injen CAI
i will be one of the first ones to get it if it fits with injen.....

i would also like a dual setup if possible (flange for BOV and a nipple to rout our stock BPV)

THANKS BINARY!!!


Problem is, I don't have anyone around here with a Speed and the Injen CAI. I don't know where to route the pipes, so I don't know where my bends need to be. If someone can give me a clear picture (large perferably) of the route that the Injen runs, I'll see what I can do.

[mazdaspeed2L]

Hmmm,.... (band2)

This is fun,..... (drunk)

Count me in!

[Dr.Sound]

Problem is, I don't have anyone around here with a Speed and the Injen CAI. I don't know where to route the pipes, so I don't know where my bends need to be. If someone can give me a clear picture (large perferably) of the route that the Injen runs, I'll see what I can do.
dude!
u got it!

i think i have pics of injen arround here somewhere

[MSP FOR LIFE]

yeah this sounds great IM definately interested. Post pics asap .

Oh yeah its gotta work witht he injen CAI too.

[BinaryRotary]

dude!
u got it!

i'll take bunch of pics either today or tomorrow of the whole path the injen takes

Hey Sound,

Post me some pics and I'll see what I can do.

[funnylittlman]

I may be down for a set of JUST hard pipes, no CAI

[MazdaspeedNJ]

I'm down for it man.....Let us know!

[FirstMAZDA]

I would be interested in a set, would have to be with the injen CAI tho.

[vIZIon4]

Id be interested in a set of hardpipes...

[marashka]

with ingen i'd get a set for sure....

[JFW]

If I supply the material, can you make them out of 2" O.D. 20 GA. 304 S.S.?

[INGREXCO]

im game for a set with the intake too

[BinaryRotary]

If I supply the material, can you make them out of 2" O.D. 20 GA. 304 S.S.?

Yeah, I can make them out of SS, I just don't think the benefits of SS on hardpipes outweigh the cost.

[INGREXCO]

any estimates on how long it will take for these to be avalible?

[Dr.Sound]

here are the pics:

http://members2.1stnetusa.com/~countdaddy-o/admin/injen/Injen01.jpg

http://members2.1stnetusa.com/~countdaddy-o/admin/injen/Injen02.jpg

http://members2.1stnetusa.com/~countdaddy-o/admin/injen/Injen03.jpg

http://members2.1stnetusa.com/~countdaddy-o/admin/injen/Injen04.jpg

http://members2.1stnetusa.com/~countdaddy-o/admin/injen/Injen05.jpg


let me know if u need more

[03.5YellowMSP]

id be in for that price.


That is a lot better then spending like 1000 for hardpipes or 2000 for the fmic kit.

[JFW]

Material is not a problem, I have a connection with a local PVF wholesaler.
The only question is shipping.

[TGMarauder]

I'd be interested in the hard pipes if they worked with the Injen CAI.