MSP After-Aftermarket Suspension

[StreetUnit]

Anyone have any problems droppings their MSP? What manufacturer are you guys using to do it?

[STLBLKMSP]

I haven't had any problems lowering my msp. I used Eibach sportline springs. These are suppose to lower the car around two inches. I can put one finger between the tire and the bottom of the fender in the front and two fingers in the back.
/members/STLBLKMSP/jeremy2.jpg

[David MPS]

Eibach are more smooth than Racing beat coils. If want change my suspension, I will get JIC Magic .Anyway our stock suspension are too hot ! :cool:

[Black Majik MSP]

Originally posted by STLBLKMSP
I haven't had any problems lowering my msp. I used Eibach sportline springs. These are suppose to lower the car around two inches. I can put one finger between the tire and the bottom of the fender in the front and two fingers in the back.
/members/STLBLKMSP/jeremy2.jpg

That's strange...I measured my car (which is at stock height) & I have 3 fingers in the front & 2 in the rear. If you are 1 front & 2 rear, does that mean that the Sportlines didn't lower the rear at all? :confused:

[Striker187]

if i ever changed out the suspension, i'd prolly go with the jic coilovers. check out the msp faq at the top of the page. you'll find all the suspension stuff i could find on the net.