All Ichibahn interior

[lancebav]

This is just the start of my interior.....
future stuff includes Daveb rings..that im going to sand primer and paint yellow and a couple of other little tings....tell me what u think

[Jeph]

Looks good, would you mind sharing how you did the E brake handle because i've been wanting to do this for a while, but am stumped.

[lancebav]

sURE NO PROBLEM.... oKAY FIRST OFF YOU HAVE TO TAKE THE FACTORY CRAPY HANDLE OFF.....WHAT YOU DO IS GET A HAIR DRYER TURN IT ON FULL BLAST AND AIM IT (REALLY CLOSE AT THE E-BRAKE) START BY PULLING FROM THE BACK OF THE HANDLE( ITS THE PART YOU CAN GET A GRIP ON DOWN IN THE CONSOLE) NEXT POSITION YOURSELF DIRECTLY OVER IT AND YANK LIKE THERES NO TOMMOROW....IF ITS HEATED UP ENOUGH ITLL COME OFF......NOW GET YOUR NEW E-BRAKE HANDLE....WITH THE ICHIBAHN HANDLE THE PRECUT GROVE IS A LITTLE TOO SMALL....BUT SINCE ITS ALUMINUM ALL U HAVE TO DO IS FILE IT A LITTLE TO MAKE IT FIT!!! i ORDERED MY E-BRAKE BOOT FORM JUJERACING.COM WHEN IT ARRIVED I SIMPLY SLID IT OVER MY NEW E-BRAKE HANDLE SECURED IT DOWN TO THE HANDLE WITH A ZIP TIE AND PRESTO! SOUNDS LIKE A LOT BUT IF YOU HAVE EVERYTHING READY TO GO ITLL TAKE NO LONGER THAN 15 MINS......THERE YAH GO I HOPE THAT HELPS

[PhreakV]

check the search engine for how to with a MOMO ebrake handle. pics are included in the thread I'm thinking of. basically you need a razor blade and some time.

(redp5)
(wrc)

[PhreakV]

or that could work too, if that works for you at least you get to keep your old ebrake to put back to stock if you ever got the itch...