PDA

View Full Version : New "E" series rear bushing for MSP


xxshyster
10-22-2003, 01:27 AM
Does anybody have the new correct part number for the MSP rear bushings, I am referring too the new "E" series.

Thanks

XXX:confused:
Delivery_Guy
10-22-2003, 01:55 AM
BN7H-28-156E

For the sway bar that is.
carbonkid
10-22-2003, 05:21 AM
Hey delivery guy, check out www.mnsportcompacts.net as they are going for a ride Saturday, our cars will LOVE the cold air! :D

show up!
Delivery_Guy
10-22-2003, 08:41 PM
Jacking this thread, not that it matters...
Hey tytanium-

Sounds great, but I have my doubts that I will make it. I haven't slept all week, grad school's a bitch, and I also doubt I would be able to talk my wife into another fall drive. I would really like to go though, and I will try...if for no other reason then to see your new hood. The picture I saw looks sweet. Anyway, thanks for the offer, I'll let you know if I can make it.
Padanky
10-22-2003, 08:44 PM
Originally posted by Delivery_Guy
BN7H-28-156E

For the sway bar that is.

Thanks!
Delivery_Guy
10-22-2003, 08:46 PM
Also, has anyone heard if the new endlinks are out yet...or was that just a viscious rumor?
Padanky
10-22-2003, 08:47 PM
Originally posted by Delivery_Guy
Also, has anyone heard if the new endlinks are out yet...or was that just a viscious rumor?

Whats supposed to be wrong with our End-Links?
Delivery_Guy
10-22-2003, 08:59 PM
Not sure if anything on the P5's, but there has been talk that on the MP3's and MSP's that there is an issue with the position of the endlink bracket...kinda talkin out of my ass here...search for a thread titled clunk explained...or is it klunk...whatever.
Padanky
10-22-2003, 09:00 PM
Originally posted by Delivery_Guy
Not sure if anything on the P5's, but there has been talk that on the MP3's and MSP's that there is an issue with the position of the endlink bracket...kinda talkin out of my ass here...search for a thread titled clunk explained...or is it klunk...whatever.

I have a full MSP suspension with the CLUNK.
Delivery_Guy
10-22-2003, 09:45 PM
Lucky you!!!
jonnydoe48
10-22-2003, 10:22 PM
the guy that posted "clunk explained" is selling the product you are describing. it is not made by mazda.
Delivery_Guy
10-22-2003, 10:40 PM
I know he is selling a product, but I thought there was also a mazda replacement part coming out soon. Maybe not though.
girth
10-22-2003, 11:27 PM
The only new Mazda part available is the E series bushings. They have never (and probably will never) issue new endlinks -- that has always just been a rumor that the endlinks are too tiny. The "clunk explained" thread was primarily for new bushings and a bracket that would change the position of the bushings - it mentioned very little about the endlinks except for the fact that the picture in the thread didn't have the stock endlinks. There are aftermarket endlinks available for the MSP I'm pretty sure....I think it was mentioned in that clunk thread.

Seriously, any time you want clunk info you're much better off just going to the MP3 section. That's got all you'll ever need (except for a permanent solution).
Padanky
10-24-2003, 01:32 PM
called a dealer and the Pt# is good and they will have to order my bushings but it might be a couple weeks.

Thanks
chris
Flat Black
10-24-2003, 02:16 PM
There is also a type of Dow Corning grease you can use that completely eliminates the clunk.
Glowmunkey
10-24-2003, 05:29 PM
Originally posted by Flat Black
There is also a type of Dow Corning grease you can use that completely eliminates the clunk.

What type? Can anyone else support this?
Flat Black
10-24-2003, 07:51 PM
I'll get what type it is from my mechanic at the dealer. He used it on the rear and it hasnt reared its ugly head yet. That was nearly 2300 miles ago.