PDA

View Full Version : Will A JL 8" W7 Fit In a MSP?


YellowSpeed17
10-12-2003, 05:41 PM
I already posted this in the audio section. Does anyone know if a JL 8" W& will fit the MSP stock enclosure?
1sty
10-12-2003, 05:59 PM
You posted it in there and no one answered, weird.
See I leave for one day and damn!
I'll answer over there.
SpcyOrangeMSP03
10-12-2003, 06:01 PM
i seriously doubt it. I took my kenwood out and there is maybe 5 inches of mounting depth, the w7 is a huge speaker.
SpcyOrangeMSP03
10-12-2003, 06:03 PM
Dimensions:
Frame Diameter: 8.5 in. (216 mm)
Mounting Hole Diameter: 6.94 in. (176 mm)
Mounting Depth: 6.83 in. (173 mm)
Overall Depth: 8.32 in. (211 mm)
Magnet Diameter: 5.8 in. (147 mm)
Pole Vent Clearance: 0.75 in. (19 mm)
Displacement: 0.06 cu. ft. (1.7 ltrs)
1sty
10-12-2003, 06:05 PM
I should aslo mention a 8W7 with proper power will blow that fatctory enclosure apart!
SOSPEED
10-12-2003, 07:35 PM
I didnt even know they made a 8'' W7. Are they new bc when i went to get myself a new sub i dont remember a 8'' W7 so i got a 8" W6 instead.. I love it. A lot tighter and hits harder than the kenwood. Also make sure your amp is bridged and the selecter is on mono and the gain is set right as well bc my amp was not set right from the factory.
1sty
10-12-2003, 07:51 PM
Teh 8W7 started shipping in March of this year I believe.
505zoom
10-12-2003, 08:26 PM
I used to have 6 8w6's in my 1st gen laser. They would make the rear glass flex when they hit. JL makes some really awesome stuff, and if a 8w7 would fit in the stock enclosure that would be sweet!
1sty
10-12-2003, 08:28 PM
Again even if you adapted it the stock enclosure would explode from a 8W7.
505zoom
10-12-2003, 08:31 PM
Is it really that weak???

I would be using the mono output of an Xtant 3300.
1sty
10-12-2003, 08:37 PM
Try it and find out :D