Wrench size on Mazda?

[Smoky14]

I can't figure out what size wrenchs to buy for my Pro 3. The manual trans drain and check seem to not be metric or SAE, the same goes for lug nuts. A 13/16 is too tight and a 22mm is too loose; whats the deal? Has Mazda come out with their own sizes?
I worked in the motorcycle business for years and they had some "special" sizes there, cost a fortune to buy all the tools.:(

[CRDMS1]

You should be able to do almost any routine maintenance with a metric socket set spanning 10mm to 24mm (if I recall correctly) for the manual tranny drain and fill. The Mazdaspeed lugs are 21mm.

Peace...(hippy)

[ahb11m]

this is gonna sound dumb... have you tried a 19mm or a 21mm

i'm positive i used one of those... mazda seems to use a lot of uneven numbers in the car

[charles]

Crazy, my manual tranny is 23mm and the auto is 24mm, although they are a lot older, I would have thought them to be similar. My oil drain plug is 19mm, try that size. Almost all of the sizes are metric except the O2 sensor socket.

[nonameheroes]

i have an 02 lx and my lugs are 21mm...not sure about the drain plug for the tranny, the oil drain plug is 18mm.

[hi-perf]

yep 21mm lugs for mine too

[WeldingHank]

seems the mazda engine on my probe is almost entirely put together with 12mm nuts/bolts.

[Matthew]

mostly 10mm and 12mm on the p5