Mazda Speed Parts List

[Brian MP5T]

Here is a copy in Three Parts of the list of Mazdaspeed items that make a MP3 into a MSP. They can be ordered from any Mazda Dealer. Also if anyone has any questions regarding anything to do with creating a custom turbo kit for a Protoge, feel free to ask. I did just that and have had to scratch build or research things one problem at a time. I also have wiring schematics for all 2002-2003 Protoge models and will scan them for all who are interested. Enjoy.

BTW: The schematic has been color coded for your ease. Yellow, Oil, Red, Exaust, Blue, Intake, Green, Coolant.

[Brian MP5T]

Part 2

[Brian MP5T]

Part 3

[pdhaudio83]

Just wondering, didn't Mazda say in SCC say there was not going to be a turbo kit from Mazda for like the MP3? Right?

[pdhaudio83]

thanks for the info!! (thumb)

[kwiktsi]

Originally posted by Brian MP5T
Here is a copy in Three Parts of the list of Mazdaspeed items that make a MP3 into a MSP. They can be ordered from any Mazda Dealer. Also if anyone has any questions regarding anything to do with creating a custom turbo kit for a Protoge, feel free to ask. I did just that and have had to scratch build or research things one problem at a time. I also have wiring schematics for all 2002-2003 Protoge models and will scan them for all who are interested. Enjoy.

BTW: The schematic has been color coded for your ease. Yellow, Oil, Red, Exaust, Blue, Intake, Green, Coolant.

Glad someone got to put that up. I have been reading out part numbers for a while since I do not have a scanner to scan mine in. Thanks!!!
Joe

[tekkie]

mods can you please sticky this somewhere? these questions come up a million times

pdhaudio, you are right they are not releasing a kit, you would have to buy all these parts separate, I am sure it would cost a fortune to do so unless you could get the dealer to give you a hell of a deal

[Brian MP5T]

Originally posted by tekkie
mods can you please sticky this somewhere? these questions come up a million times

pdhaudio, you are right they are not releasing a kit, you would have to buy all these parts separate, I am sure it would cost a fortune to do so unless you could get the dealer to give you a hell of a deal

To give you an idea on the costs...

Turbo Mazdaspeed Garrett T-25... $3700.00 Cdn

Trubo Garrett T-25 ... $1500.00

Manifold Mazdaspeed $1400.00 Cdn.

Yikes. Go Custom. It's cheaper

[Dexter]

Hey guys, i typed the scanned sheets up, because it was hard to read in some spots. Also, this might make searching for part numbers easier. Thanks for posting this!! Also, please let me know if there are any errors, as i said it was pretty hard on the eyes. *blinks*

:D


MAZDASPEED PROTEGE NON-TURBO PARTS LIST
-----------------------------------------------------------------------
Description Mazda Part Number Qty/Kit
Rear Skirt, Primer 0000-8Y-C06-00 1
Spoiler, Primer 0000-8Y-C06-00 1
Trunk Lid Torsion Bar R BNYH-52-791 1
Trunk Lid Torsion Bar L BNYH-52-792 1
Wind Split 0000-88-C07 1
Wind Split Hardware 0000-88-C23* 1
Trunk Badge 0000-88C12** 1
Engine Badge 0000-88C13** 1
Shift Pattern 0000-88-C17 1
Front Mascot 0000-8R-C10 1
Rear Mascot 0000-8R-C11 1
Protege Symbol 0000-8R-C13 1
Shift Knob 0000-88-C10 1
Floor Mats 0000-87-7701-09 1
Audio Head Unit 0000-81-C19 1
Subwoofer/Amp/Tray 0000-81-C33 1
Front Speakers 0000-81-C04A 1
Rear Speakers 0000-81-C32 1
Emissions (VECI) Label BP7H-66-036 1
Muffler 0000-8M-C09 1
Wheel Lock 0000-88-120C 1
Alarm 0000-8F-C04 1
Cargo Net 0000-88-5499-0A 1

*Part number appears to be same as Item 14 on Turbo System Parts list.
Please confirm correct numbers

**Typos? Shouldn't there be a dash between 88 and C12?

MAZDASPEED PROTEGE TURBO SYSTEM PARTS LIST
-----------------------------------------------------------------------
Item Number Description Mazda Part Number Qty/Kit
1 Exhaust Manifold 0000-88-C40 1
2 Stud, Exhaust Manifold-to-Turbo 0000-88-C16 4
3 Gasket, Turbine Inlet 0000-88-C17 1
4 Turbocharger 0000-88-C42 1
5 Stud, Turbine Outlet 0000-88-C18 5
6 Gasket, Turbine Outlet 0000-88-C19 1
7 Heat Shield, Turbo 0000-88-C43 1
8 Downpipe 0000-88-C45 1
9 Stud, Downpipe-to-Elbow 0000-88-C20 3
10 Clamp Set, Oil Feed Hose 0000-88-C46 1
11 Bolt, Clamp Mounting 0000-88-C47 1
12 Turbo Drain Flange Assembly 0000-88-C48 1
13 O-ring 0000-88-C22 1
14 Bolt, Oil Drain Fitting-to-Turbo 0000-88-C23 2
15 Washer 0000-88-C24 2
16 Hose, Turbo Oil Drain 0000-88-C25 1
17 Clamp, Hose to Turbo Drain Flange 0000-88-C26 1
18 Pipe, Water Feed Assembly 0000-88-C49 1
19 Bolt, Banjo 14mm x 1.5mm 0000-88-C50 1
20 Gasket, Banjo 0000-88-C27 1
21 Clamp, Hose Water Feed 0000-88-C51 1
22 Pipe, Water Return Assembly 0000-88-C52 1
23 Heat Shield, Exhaust Manifold 0000-88-C53 1
24 Water Return Elbow 0000-88-C54 1
25 Clamp, Water Return Pipe to Elbow 0000-88-C55 1
26 Duct, MAF Sensor-to-Compressor Inlet 0000-88-C56 1
27 Clamp, MAF Sensor-to-duct 0000 88 C63 1
28 Clamp, Compressor inlet-to-duct 0000 88 C84 1
29 Duct, Compressor Out-to-Intercooler Inlet 0000-88-C57 1
30 Clamp, Compout, IC in, IC out-to-duct 0000 88 C85 1
31 Duct, Intercooler Out-to-Throttlebody 0000-88-C58 1
32 Clamp, Throttlebody-to-duct 0000 88 C86 1
33 Duct. Inlet Air-to-Airbox 0000-88-C59 1
34 Insulator, Air Duct S501-13-349 1
35 Spacer, Air Duct PS05-13-321 1
36 Bolt, Air Duct 90786-0620 1
37 Bypass Valve N3A1-20-250 1
38 Hose, Bypass Valve 0000-88-C61 1
39 Hose, Bypass Valve 0000-88-C62 1
40 Clamp, Oetkier 0000-88-C63 1
41 Clamp, Spring 0000-88-C64 1
42 Clamp, Intake Hose 0000-88-C32 2
43 Clamp, TEE to ABV and WG Actuator 0000-88-C33 4
44 Check Valve, Canister Purge 0000-88-C67 1
45 Hose, CV to Intake Manifold FS7N-20-371A 1
46 Hose, CV to Solenoid ZM39-20-361 1
47 Clamp, CV Intake 0000-88-C88 2
48 Clamp, CV Solenoid 0000-88-C69 2
49 Wire Tie w/ Clip - Oil Feed Line B511-67091 1
50 Lower Radiator Hose 0000-88-C70 1

[Fëakhelek]

Originally posted by kwiktsi


Glad someone got to put that up. I have been reading out part numbers for a while since I do not have a scanner to scan mine in. Thanks!!!
Joe

Where did you guys get this information? Is this from a shop manual?

[MSP Pro]

Brian MP5T : I could use the wiring diagram that shows the rear tail lights wiring colors. I'm putting in a trailer hitch for my jetski and need to wire it in to the lights.

Thanks.

BTW, the manuals are still on backorder here in the states.

[Brian MP5T]

Originally posted by MSP Pro
Brian MP5T : I could use the wiring diagram that shows the rear tail lights wiring colors. I'm putting in a trailer hitch for my jetski and need to wire it in to the lights.

Thanks.

BTW, the manuals are still on backorder here in the states.

I'll get back to you with it soon. Later

[Dexter]

Originally posted by FBI14
my comp wont read the zip file for some reason, and i thought it wouldnt make sense if someone posted the attatchment and then posted the numbers, so calm donw there slappy


Here is a copy in Three Parts of the list of Mazdaspeed items that make a MP3 into a MSP



Hey guys, i typed the scanned sheets up


I typed the part numbers from the scanned sheets Brian posted.

[Dexter]

lets all just stay chilled.

[Brian MP5T]

Hey,

Glad to have bben of service. I'm going on holidays for 40 days or so, but I'll try to log on as often as possible. E-Mail me questions directly if you need an answer fast. Later

[Chunchoy14]

Does anyone know the part number for the LSD in the MSP? I need to buy just the LSD not the whole tranny.

[pdhaudio83]

i am unsticking this. for future reference, you can download mazda stuff at http://www.true-true.com/mazdastuff/

thanks.

[StuttersC]

Originally posted by Chunchoy14
Does anyone know the part number for the LSD in the MSP? I need to buy just the LSD not the whole tranny.


The FAQ has all the part numbers you will need to get it.

[Brian MP5T]

I asked my service manager about the LDS on the MSP. He said that it was available but it would be cheaper to get the one of the JDM Familia Sport 20?? I thought that car was an AWD??

[DiscreetSpeed]

3rd ding ding we got a winner!

edit: j/p with ya man..dont take it to heart(band2)

[Brian MP5T]

http://www.msprotege.com/members/Brian%20MP5T/HJGKJGLJHGFDYU';%20(32).gif

[Brian MP5T]

http://www.msprotege.com/members/Brian%20MP5T/HJGKJGLJHGFDYU';%20(32).gif

[Rogue]

bump for people looking to use MSP parts on their turbo upgrade.

[Mutmatt]

bring outcha dead! bring outcha dead!

[Brian MP5T]

Jesus...

2003, I think that was one of my first posts..