gauge pillars for Mp3 or proteges

[dragonbabe79]

does anyone have a gauge pillar (that holds three after market gauges) made by autometer in their protege?

I know that autometer makes one for a protege that will hold three gauges but you need to go through an independant distributer to get one, you cant buy direct from autometer...

If anyone out there has one give me a shout and let me know where it can be purchased!

[dibblejr]

Babe,
You can order one from summit racing 1-800-962-9094. I have one in my MP3, it just mounts over the stock pillar, just have to drill 4 or so holes.
I dont remember the part #, just ask for a 1999-2002 protege.

[dragonbabe79]

so it just mounts over the other pillar.....?
damn, now I need to be creative!

T

[dibblejr]

Babe,
In order to make it perfect I still drilled large access holes in the stock pillar, I also permanetly drilled the stock pillar cover to the reinforcment beam, not a chance to vibrate loose.
Good luck, the pillar looks tight.

[PaulMP3]

i got a two gauge pillar pod. I filed/cut the botom hole to fit a 60mm gauge and then i have a 52mm above that, it looks real nice.

[Little Beavis]

I've got a 3 gauge pillar.
Works well, not a perfect fit, but I only used two "rivets" to hold it in place but one of mine also goes into the steel reinforcement, so the pod is locked in place. It works out quite well, but definitely, and I mean definitely not stealthy! :D

[LinuxRacr]

I should have my 3 pod pillar today! Yeah!