Turbo Timer Questions

[InsidiousMSP]

Hey, I would like to get the HKS Type-0 Turbo Timer, but Dynamic Turbo says they don't have a harness for an MSP. Does anyone know of someone who makes a harness for our cars? If not, does anyone have a wiring diagram? And where should you wire it? At the steering column or ECU?

Thanks.
-Jeff

[AGR]

Originally posted by InsidiousMSP
Hey, I would like to get the HKS Type-0 Turbo Timer, but Dynamic Turbo says they don't have a harness for an MSP. Does anyone know of someone who makes a harness for our cars? If not, does anyone have a wiring diagram? And where should you wire it? At the steering column or ECU?

Thanks.
-Jeff

'Hi Jeff! I pretty much went with the diagram that "1st MP3 in NH posted on the electronics side of the forums. I also had a friend of mine assist me,who is a mechanic. As far as I know, nobody offers a harness for our cars. We used 3M Scotch Locks. Worked great!

[falkofire]

there are some how-to's of this floating around aswell

[Dexter]

i have an HKS type 1, great timer easy to wire up. i soldered my connections in with a nice big soldering gun.

3 main wires, (12V constant, 12V ignition, 12v accesory), ground, e-brake wire (so no one can drive away while the countdown is occuring), RPM and Speed sensor wiring for the timing functions (0-60, 1/4mi, 1/8mi). those were easy too, i just wired them to the wires that go to the gauges so i wouldnt have to dig for the ECU

[OrangeAppeal]

The write-up in my signature seems to help others, soo check it out. It's not for your timer, but the 3 main wires are still the same. Good clear pictures. Let me know if there is something in it you don't understand.
Good luck,
Jesse