Forged Internals for the MSP?

[ForceFed]

Hey guys I need to get some info on a few parts I might want to get installed while my car is ripped apart at the dealer.I would like to know who makes forged pistons and rods for the 2.0L motor as well as lightened flywheels?I will probably be adding these while the car is apart so any info you guy's can provide me with would be greatly appreciated!I am also gonna do the cam swap (most likely)but i think i'll do this after i get the car back.The only other question that I have is does anyone make lower compression pistons that are forged for the 2.0L?

HMMMM....Mean car in the making???
Thanx,Matt:cool:

[perfworks]

Originally posted by ForceFed
Hey guys I need to get some info on a few parts I might want to get installed while my car is ripped apart at the dealer.I would like to know who makes forged pistons and rods for the 2.0L motor as well as lightened flywheels?I will probably be adding these while the car is apart so any info you guy's can provide me with would be greatly appreciated!I am also gonna do the cam swap (most likely)but i think i'll do this after i get the car back.The only other question that I have is does anyone make lower compression pistons that are forged for the 2.0L?

HMMMM....Mean car in the making???
Thanx,Matt:cool:
there is only one guy you need to talk to. call puter rods at 619 422 5384 ask for brian
he will take care of rods and pistons for you.
:D
someone else hear can help you with the flywheel. im sticking with stock

[ForceFed]

Anyone else W/ juicy info?

[03MzdSpdSTP]

mmm sounds like ur building a NICE MSP!!

[AFaceInTheCrowd]

call carillo rods. they make some awesome stuff. pauter rods are kickass too. also indigo, i think, makes flywheels. fidenza is the most used on the board.

[I-Am-Chris]

Call JE they can make u some pistions. Talk to Linux he had some made and you can prob hook up with him.

[perfworks]

Originally posted by perfworks

there is only one guy you need to talk to. call puter rods at 619 422 5384 ask for brian
he will take care of rods and pistons for you.
:D
someone else hear can help you with the flywheel. im sticking with stock
damn spelling i meant PAUTER
and the pistons he uses are made by JE
he will extend you the same proffesional rate he pays for them if you order rods:D

[RX-KEVIN]

force fed if you took your car to a dealer they shouldn't be able to put any forged parts into your engine cause you should be getting a whole assembled engine under warranty

[ForceFed]

God you are so negative RX-kevin! DO YOU THINK YOU KNOW EVERYTHING THAT GOES ON!YOU ALWAYS HAVE AN ANSWER FOR EVERYTHING! How many dealers do you know installing Spool turbo's on Brand new protege's????? Bet your dealership isn't doing it is it??? I thought not !So me and the service manager had a little talk about all my options and one option they might have to go with would be ordering all the pieces individually and in the case of that happening I might be upgrading some of my internals while it's apart!THANK YOU VERY MUCH! You seem to go to everyones thread and put in a lot of input that people didn't ask for!I didnt ask"What should Mazda be doing to my car!" did I? No, I asked "does anyone have some info on forged internals and flywheels?" So if your not going to help please Keep your should be's to yourself.THANK YOU ! To all the guys that helped me with some info,THANK YOU VERY MUCH!
Matt:cool:

[NC_MP3]

Go to the MP3 section and click on the MP3 aftermarket guide. It has alot or parts for our engines, although I haven't added the forged pistons and rods in there yet.

[LinuxRacr]

See my threads on my rebuild. Has all my info:

JE Pistons------------->http://www.protegemp3.com/vbb225/showthread.php?s=&threadid=15643

Pauter Rods---------->http://www.protegemp3.com/vbb225/showthread.php?s=&threadid=15455

Engine Rebuild------->http://www.protegemp3.com/vbb225/showthread.php?s=&threadid=14485

The Rebuild Gallery-->http://www.protegemp3.com/vbb225/showthread.php?s=&threadid=17957

Hope all this helps!

[perfworks]

Originally posted by LinuxRacr
See my threads on my rebuild. Has all my info:

JE Pistons------------->http://www.protegemp3.com/vbb225/showthread.php?s=&threadid=15643

Pauter Rods---------->http://www.protegemp3.com/vbb225/showthread.php?s=&threadid=15455

Engine Rebuild------->http://www.protegemp3.com/vbb225/showthread.php?s=&threadid=14485

The Rebuild Gallery-->http://www.protegemp3.com/vbb225/showthread.php?s=&threadid=17957

Hope all this helps!

its all peerrttyy and neat:D

[ForceFed]

Much THANX to all the guys giving me info! I appreciate it much!
Matt:cool:

[LinuxRacr]

That's what this site is for! (thumb)

[ForceFed]

Originally posted by LinuxRacr
That's what this site is for! (thumb)

Yes it is!(yippy)
Thanx LinuxRacr :D

[03MzdSpdSTP]

your car is going to be killer when it is done!!! Kill a Skittle!!

[ForceFed]

Take the rainbow......TAKE HIM ......TAKE HIM!!!(owned)

[LinuxRacr]

Originally posted by ForceFed


Yes it is!(yippy)
Thanx LinuxRacr :D

What about our boi Perfworks? He's given some very vital info too.

[ForceFed]

Originally posted by LinuxRacr


What about our boi Perfworks? He's given some very vital info too.

Thank you too Perfworks:D
So sorry I forgot you ,
Matt:cool:

[Familia323]

I just have to say thank you to this site and all the people on it! Without it, my little Protege wouldn't be kicking ass soon. So thanks alot!:D

[perfworks]

now if i can only find that little yellow guy that bows ................:D

[ForceFed]

are you referring to this(bj)
or this?
(bowdown)


LOL!

[perfworks]

Originally posted by ForceFed
are you referring to this(bj)
or this?
(bowdown)


LOL!

LOL you guys are great:D

[ForceFed]

I couldn't tell if you said blows or bows??
LOL!:D

[LinuxRacr]

Too bad I was accually sleep last night for a change...(lol) You guys are clownz!

[I-Am-Chris]

Originally posted by ForceFed
God you are so negative RX-kevin! DO YOU THINK YOU KNOW EVERYTHING THAT GOES ON!YOU ALWAYS HAVE AN ANSWER FOR EVERYTHING! How many dealers do you know installing Spool turbo's on Brand new protege's????? Bet your dealership isn't doing it is it??? I thought not !So me and the service manager had a little talk about all my options and one option they might have to go with would be ordering all the pieces individually and in the case of that happening I might be upgrading some of my internals while it's apart!THANK YOU VERY MUCH! You seem to go to everyones thread and put in a lot of input that people didn't ask for!I didnt ask"What should Mazda be doing to my car!" did I? No, I asked "does anyone have some info on forged internals and flywheels?" So if your not going to help please Keep your should be's to yourself.THANK YOU ! To all the guys that helped me with some info,THANK YOU VERY MUCH!
Matt:cool:

Damn man take a smoke break. That is how the dealership gets the motors. he was just stating that incase u didnt know.

[ForceFed]

Yo I Am Chris,me and RX-Kevin have sorted out our misunderstanding on our own already ,But thanks for the input!
We did a little PMing today and now we know how each other think(I think?)Were cool!
Matt

[perfworks]

Originally posted by ForceFed
Yo I Am Chris,me and RX-Kevin have sorted out our misunderstanding on our own already ,But thanks for the input!
We did a little PMing today and now we know how each other think(I think?)Were cool!
Matt

:'( ooowww you guys
lets get a group hug going!!;)

[ForceFed]

I got a big hug and a kiss right here for you Perfworks!(k)

[perfworks]

Originally posted by ForceFed
I got a big hug and a kiss right here for you Perfworks!(k)

heheLOL:o

[LinuxRacr]

Originally posted by ForceFed
I got a big hug and a kiss right here for you Perfworks!(k)

Uh oh...http://www.tsog.net/forums/images/smiles/ugh.gif

[LinuxRacr]

Originally posted by perfworks


:'( ooowww you guys
lets get a group hug going!!;)

http://www.rx7club.com/forum/images/smilies/grouphug.gif

[I-Am-Chris]

Originally posted by LinuxRacr


http://www.rx7club.com/forum/images/smilies/grouphug.gif

HAHAHA!!!!!

[ForceFed]

LMFAO!(rofl)

[Familia323]

HAHAHAHAHA!!! where did you find that!(thumb)

[LinuxRacr]

Originally posted by Familia323
HAHAHAHAHA!!! where did you find that!(thumb)

Do a right-click, and hit properties. You will see exactly where I got it from.;)

[Familia323]

heh.. Thanks.