PDA

View Full Version : Just installed p5 fogs and wire harness dont match up


Bluemica3.5
10-11-2009, 06:29 PM
have the factory harness got off dj dub and the harness that is already in the car buy the washer fluid tank, the ends dont match up anyone have any ideas.
MSP2024
10-11-2009, 06:55 PM
mine was that way to, hard wire them
Ricktalife
10-11-2009, 08:06 PM
i had the same issue, i had a 3 prong connector at the end that plugs into the car wiring, but needed a 2 prong. i just searched the F/S section and bought the 03 MSP fog harness from a partout. maybe the one i had originally and the one that dub sold you are for the base model protege's? (es/lx)
P2K
10-11-2009, 08:23 PM
I ran into that problem as well when I had my Protege. Just get four male and four female spade connectors. Cut the old ones off, crimp the new ones on and you're set. Be sure to get the ones with covers.

http://www.zzxdatsun.com/images/catalog/wiring/wh1009-big.jpg
Bluemica3.5
10-12-2009, 07:44 PM
i had the same issue, i had a 3 prong connector at the end that plugs into the car wiring, but needed a 2 prong. i just searched the F/S section and bought the 03 MSP fog harness from a partout. maybe the one i had originally and the one that dub sold you are for the base model protege's? (es/lx)


the one i got from dub was from the p5 he was parting out.
im just going to hard wire them in and go from there
Patrickenator
10-14-2009, 12:46 PM
if you hardwire them you'll have to dangle your foglights every time you wanna take off the bumper... i'd go with some quality spades if i were you...probably easier even than hardwiring
SNOWFLAKEPSI
11-08-2009, 09:47 PM
you need the fog light harness from a Protege SEDAN! Not the Protege 5.
yudkib
11-08-2009, 09:57 PM
radio shack sells things like this that are rated to reasonable amperages. this one is 20A per connector, i dont know what the rating on the fog circuit is.
theyre sold in pairs, individually, 2 pin, 4, 6, 12... a ton of options. i have a set for a project im working on but i havent used them yet.

http://www.radioshack.com/product/index.jsp?productId=2103448&tab=features
good luck
yudkib
11-08-2009, 09:57 PM
radio shack sells things like this that are rated to reasonable amperages. this one is 20A per connector, i dont know what the rating on the fog circuit is.
theyre sold in pairs, individually, 2 pin, 4, 6, 12... a ton of options. i have a set for a project im working on but i havent used them yet.

http://www.radioshack.com/product/index.jsp?productId=2103448&tab=features
good luck