troubleshooting a control module

[wagon]

Pulled the Keyless Entry Control Module from 2003 p5 and have begun to test with meter but all looks fine so far.

Any suggestions or anybody done this before?

[Thefriar]

Pulled the Keyless Entry Control Module from 2003 p5 and have begun to test with meter but all looks fine so far.

Any suggestions or anybody done this before?


Needs to be done in the car with a scantool
You need to monitor the sensor and switch inputs (ie door sw. trunk sw. ect) going to it and see if they are close to what the module is telling you it reads on the scantool. Going to need wiring diagrams and a dmm to help you with this one as well

[wagon]

Mapping the board was taking forever so I gave up but luckily a board member had one local...plug and play!

All fixed, thanks blynd_spy!

In the end, Keyless Entry Control Module was bad.