Heat Shield Bolts

[paniaguae640]

I just wanted to know the size of the heat shield bolts because my car didn't come with a heat shield and i'm about to put one on and I need the sizes for installation; I have a msp.

[paniaguae640]

thank you

[paniaguae640]

i forgot to mention its the exhaust manifold heat shield

[TheMAN]

M6x1.0x10 flange head

[speedin]

I take it you received it?

[jbilliel]

Good luck! If you don't have at least 2 or the 4 break off you are doing awesome!

[paniaguae640]

I take it you received it?

yeah just received it, thank you; I would do business with you again.

[paniaguae640]

can not continue with installation of the heat shield, found out that there is a broken screw on the bottom. But I have two more questions, is there any special way on removing the oxygen sensor or do I just unscrew it? And for the broken screw do I just use a drill and drill a hole there?

[speedin]

you could try and use an "easy out" and try and save the hole. looks like a drill bit just reversed. i think the 02 is a 13/16 or something like that. just unclip and unscrew.