View Full Version : Problem installing new deck
foxracer
08-09-2009, 04:58 PM
Ok so i got a new deck becaues the stock one went out. I hooked everything up and it dosnt work. I checked the fuses and their fine. I found that theres constant power going to the deck but it wont turn on. When i turn the key theres no power to the acc. wire that turns the deck on. Any clue what this could mean or any other fuses i should check?
khaosman
08-09-2009, 05:22 PM
Does your dome light come on? I had the same problem as you and it turned out the dome light fuse blew.
foxracer
08-09-2009, 05:46 PM
ya it comes on
special--k
08-10-2009, 10:54 AM
Does anything else turn on... there is a lot of stuff connected to the Acc line. Kinda eazy to fix this one. If the HU is the Only thing not turning on, then there is a break in the line. Follow it back, and see where it is.
If Nothing turns on, the the break is before the ignition.
SleepyMSP
08-10-2009, 11:39 PM
like above you've got a break in the line somewhere try giving the acc. wire a 12V+ signal to see if the deck powers up, if not well theres your answer
foxracer
08-11-2009, 02:42 AM
I checked it out with a voltmeter and theres power to the fuse but none to the deck so im sure i just need to replace the wire and it should be good. thanks guys ill let you know if i have any other problems.
Powered by vBulletin® Version 4.1.7 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.