PDA

View Full Version : dtc definition



eszoom
07-21-2009, 04:34 PM
just want some confirmation on this code 0031. is this the first o2 sensor, plugged into the top of the header? thanks.

HAILERS
08-13-2009, 05:16 PM
Yes. Download the manual from this site and look in the ENGINE section for trouble shooting fault codes.

If it's a aftermarket 02 sensor, then check out the place they spliced into the harness. Look for loose connections etc.

http://www.mazdas247.com/forum/showthread.php?t=123744855

eszoom
08-14-2009, 03:15 AM
thanks for replying, i just went ahead and bought a o2 sensor from mutmatt and reset the cel. hasn't been back since. sometimes the definition may be clear to mechanic but to a regular guy a little hazy.

HAILERS
08-16-2009, 02:40 PM
Sometimes your car has to go thru a *Drive Cycle* before the fault code is turned on so to speak.

What a drive cycle consists of is written somewhere. IN the online FSM probably. Anyway, it's got to jump thru a number of hoops before it kicks a fail light again, if indeed there is a failure. No reply needed, just typing while watching MotoGP on Speed.