need a good tune and builder

[oneqwkmsp]

I have a 03 msp i have built imports 4 12 yrs mostly hondas i had 2 shut down my garage about 4 months ago im going through a divorce and had 2 move and couldnt afford the lease .Anyways i dont have a place 2 do my car plus i want a expereinced msp mech.My car has just started to tap rod bearing I of course want to do all forged internals.I live in knoxville i dont care to tow it to a nearby state if there is a good tune shop that someone here has used please give me some advice thanxs je

[zuku26]

ProtegeGarage!!!!

[slo03.5msp]

Pg is a good place to go. They can build the motor and install it. They also sell the easiest tuning method as long as you don't want to go to crazy. You could do a forged build with an 8.5:1 with a gt 2876 which conservatively should net you around 300 whp if you wanna spend the money.

[Wagonbacker9]

personally, I don't like 8.5:1, too much of a peak HP build. I prefer a more streetable 9:1... but this is coming from a guy who will likely never forge his MSP. lol

[oneqwkmsp]

well you can actually run higher comp with less boost as long as your tune is good.I didnt know pg did installs but i would like to get higher hp #s i would like around 350-375 i dont think that is to much.i app the hit if there is anyone else let me know

[JDM Sam]

me

[Knox Joe]

Have you heard of OTT Motorsports? He's here in Clinton, TN, and he's worked on my car, hes not an expert on MSPs, but he knows his stuff, and I'd trust him to build my motor.

Call Dave, he's the owner @ 865-269-4667 tell him Joe with the Protege told you to call. If you need anymore help or have any questions you need help with don't hesistate to PM or call me @ 865-310-1348.

[oneqwkmsp]

I have I didnt know if they were any good I have seen some hondas he did they looked really good thanx

[dandan2]

sam is a great builder of the msp's! if ur wanting to travel to have it built!

[Knox Joe]

I have I didnt know if they were any good I have seen some hondas he did they looked really good thanx

Yeah, Dave doesn't turn out crap cars. He just got done with a roughly 800hp supercharged, nitrous, and alky injected foxbody Mustang, and a EVO that may put down just as much, built all by Dave. He won't even hire anyone because he doesn't want to risk them making any mistakes. He is also very reasonable on pricing, and beats any of the "tuner" shops around here.

[protege 5]

you also got a guy named nick in alcoa he built a very nice 300z at about 800 hp an his very one eagel talon at 700 something hp his buisness is called full boost in alcoa you can reach him at 865-249-7591 he also has good pricing as well

[js_protege_03dx]

Yeah, Dave doesn't turn out crap cars. He just got done with a roughly 800hp supercharged, nitrous, and alky injected foxbody Mustang, and a EVO that may put down just as much, built all by Dave. He won't even hire anyone because he doesn't want to risk them making any mistakes. He is also very reasonable on pricing, and beats any of the "tuner" shops around here.
Does he possibly have a web site?

[Knox Joe]

you also got a guy named nick in alcoa he built a very nice 300z at about 800 hp an his very one eagel talon at 700 something hp his buisness is called full boost in alcoa you can reach him at 865-249-7591 he also has good pricing as well

I actually just got a quote from him for a stand alone install and tune and he was very reasonable.

[protege 5]

i think dave at ott motor sports man but isnt all the way up yet ..

[MSP2k3]

Nick at full boost tuning did some work on my MSP as well, very reasonable.

[jeanspeed]

me

can you make the msp work with a ems greddy e-mange ultimate. i would travel to do it. and what the # to forge my internal(mj)

[oneqwkmsp]

I actually went and talked to nick they have some nice cars there they made some sick turbo manis they seem to know what their doin

[LMT BJ]

Speed circuit