View Full Version : Headlight Adjustment??
tweakingmsp
07-14-2009, 12:23 AM
Is there a way to adjust the headlights on the MSP?
Falango
07-14-2009, 12:26 AM
If you mean to aim them, there's a small dial on the back of the housing. A Philips screwdriver will do the trick. Park on level ground, about 20-30ft. from a wall when aiming them so you know they are level with each other.
tweakingmsp
07-14-2009, 12:30 AM
If you mean to aim them, there's a small dial on the back of the housing. A Philips screwdriver will do the trick. Park on level ground, about 20-30ft. from a wall when aiming them so you know they are level with each other.
Yep, that's what I meant. Thanks, I'll have to do that in a little bit.
TheMAN
07-14-2009, 12:37 AM
If you mean to aim them, there's a small dial on the back of the housing. A Philips screwdriver will do the trick. Park on level ground, about 20-30ft. from a wall when aiming them so you know they are level with each other.
brute force with your fingers work too :D
Falango
07-14-2009, 12:55 AM
It does. They seemed to turn easy enough with my fingers for me, but they are tight enough that they won't move on their own.
greasemonkey524
07-15-2009, 09:15 AM
It does. They seemed to turn easy enough with my fingers for me, but they are tight enough that they won't move on their own.
+1, they moved easily for me when I turned them by hand. Is there an adjustment for side to side though? I believe that dial only moves them up/down.
Falango
07-15-2009, 12:56 PM
It does. I haven't found a side to side adjustment.
slavrenz
07-15-2009, 01:11 PM
+1, they moved easily for me when I turned them by hand. Is there an adjustment for side to side though? I believe that dial only moves them up/down.
Use a hammer :cool:
greasemonkey524
07-15-2009, 05:24 PM
Use a hammer :cool:
lol, I don't have a problem with them, I was just curious.
Powered by vBulletin® Version 4.1.7 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.