PDA

View Full Version : power fuse for stock amp?

msptn03
07-01-2009, 03:42 PM
alright i got a new stock sub for the stock unit and i replaced the fuse on the amp(stock amp) and the connection r right but iam getting no power to the amp. is there a fuse for the power wire that connects to the amp? and if so where is it?
INGREXCO
07-04-2009, 02:36 PM
under the hood there should be a yellow wire coming off the battery (if i remember right its been a few years) There should be a little black cap covering the inline fuse. I hope this helps
Bluemica3.5
07-05-2009, 11:33 AM
yep thats were its at.
msptn03
07-05-2009, 09:17 PM
awsome thanks
msptn03
07-06-2009, 04:51 PM
ha tyhats all it was word!! thanks for the help
chwood
11-16-2009, 01:52 PM
Ok so my sub just quit and I have to post a lame question here: where exactly is the fuse at the amp? Is it inside the amp housing or am I just blind??

(the in-line one at the battery looks fine)
DIYSpeed#1193
11-16-2009, 02:23 PM
the fuse for the amp is located on one of the sides(I forget which side because there are 2 sides that have terminals and switches one of which has the fuse..)....you should have no problem finding it though.....it is on the outside of the case....you don't have to take anything apart to get to it....maybe it's possible that you can't find the fuse cause there isn't one in there....look for 2 slots where a fuse should be if you can't find an actual fuse...
chwood
11-18-2009, 12:10 PM
the fuse for the amp is located on one of the sides(I forget which side because there are 2 sides that have terminals and switches one of which has the fuse..)....you should have no problem finding it though.....it is on the outside of the case....you don't have to take anything apart to get to it....maybe it's possible that you can't find the fuse cause there isn't one in there....look for 2 slots where a fuse should be if you can't find an actual fuse...

Aha!
danke sir. all is well in subsville now.