nicole@Tri-Point
06-01-2009, 05:45 PM
(wiggle) Thats right.. For a limited time only Tri-Point Engineering is offering our turbo kit at a discounted price! (wiggle)
Now $3399.00
(+shipping)
Thats $600 OFF!! (eek2)
http://tripointengineering.com/images/kit.jpg
Information about the Kit:
NOTE: This kit is ONLY for the 2.3L. It was also designed to fit a Manual Transmission, however we have had some install this on an Automatic with few minor modifications.
Was $3999.99 - Now 3399.00
The Tri-Point Engineering Mazda3 2.3L Turbo Kit has been in development for nearly two years. We have done extensive R&D and testing to provide you the highest quality kit available for your Mazda3. The turbo kit was designed from a clean sheet with the same care and attention to detail that goes into our race cars. As we developed the kit, we operated under 3 guiding criteria:
1. Only high-quality parts were to be used throughout - not just the turbo or the intercooler. Every part has been chosen with track duty in mind. All fittings, hoses and heat shielding are of the highest quality.
2. Installation should be well thought out and appear clean and tidy when finished. Hose lengths are cut precisely. Many parts are pre-assembled to make installation easier and more precise when finished.
3. The kit must have power, driveability and durability. Anyone can throw a huge turbo on an engine and get more power. Typically turbo kits employing this strategy are short-lived. Our Kit has over 20,000 street miles on it. We've tried different intercoolers, turbos, down pipes and hoses.
We've spent many hours on our Dynapak chassis dyno fine tuning the kit. We've spent months driving our "mule" car on the street, data logging our engine management system and improving drivability. We've spent days on "cold start" tuning alone. There isn't a kit out there with more research and development than the Tri-Point Engineering turbo kit. Our kit puts out great power, is durable, and most importantly has great driveability. It feels like a stock car, until you want to "go".
Kit Includes:
- Garrett GT28R72 Turbo
- Stainless Steel Downpipe
- Aluminum Intercooler Piping
- Bosch Fuel Injectors
- Cast Iron Manifold
- All fittings/hoses
- AEM FI/C w/Harness
This is a complete kit.
Don’t miss out on a chance to get a great kit at an awesome price!
Click HERE to Purchase (http://tripointengineering.com/index.php?cPath=572)!
(drive2)
Now $3399.00
(+shipping)
Thats $600 OFF!! (eek2)
http://tripointengineering.com/images/kit.jpg
Information about the Kit:
NOTE: This kit is ONLY for the 2.3L. It was also designed to fit a Manual Transmission, however we have had some install this on an Automatic with few minor modifications.
Was $3999.99 - Now 3399.00
The Tri-Point Engineering Mazda3 2.3L Turbo Kit has been in development for nearly two years. We have done extensive R&D and testing to provide you the highest quality kit available for your Mazda3. The turbo kit was designed from a clean sheet with the same care and attention to detail that goes into our race cars. As we developed the kit, we operated under 3 guiding criteria:
1. Only high-quality parts were to be used throughout - not just the turbo or the intercooler. Every part has been chosen with track duty in mind. All fittings, hoses and heat shielding are of the highest quality.
2. Installation should be well thought out and appear clean and tidy when finished. Hose lengths are cut precisely. Many parts are pre-assembled to make installation easier and more precise when finished.
3. The kit must have power, driveability and durability. Anyone can throw a huge turbo on an engine and get more power. Typically turbo kits employing this strategy are short-lived. Our Kit has over 20,000 street miles on it. We've tried different intercoolers, turbos, down pipes and hoses.
We've spent many hours on our Dynapak chassis dyno fine tuning the kit. We've spent months driving our "mule" car on the street, data logging our engine management system and improving drivability. We've spent days on "cold start" tuning alone. There isn't a kit out there with more research and development than the Tri-Point Engineering turbo kit. Our kit puts out great power, is durable, and most importantly has great driveability. It feels like a stock car, until you want to "go".
Kit Includes:
- Garrett GT28R72 Turbo
- Stainless Steel Downpipe
- Aluminum Intercooler Piping
- Bosch Fuel Injectors
- Cast Iron Manifold
- All fittings/hoses
- AEM FI/C w/Harness
This is a complete kit.
Don’t miss out on a chance to get a great kit at an awesome price!
Click HERE to Purchase (http://tripointengineering.com/index.php?cPath=572)!
(drive2)